T-72 tanks in Iraqi service

In the 1970s and 80s, Iraq purchased a hundred T-72 from the Soviet Union. Iraq utilized these tanks during the Iran-Iraq War, which temporarily put T-72 exports to Iraq to a halt. However, Poland started delivering T-72s in January of 1982, and in September of the same year, Soviet exports resumed as well. Overall, Iraq received about 1,038 T-72 tanks, primarily produced in Poland. Some of these were destroyed during the Iran–Iraq War, or captured by the Iranians.[2] As of 1996, Iraq had 776 T-72 tanks in service.[3]

Two years after the fall of Saddam Hussein, the new Iraqi Government acquired dozens of refitted T-72M1s from Hungary, in order to equip an armored brigade. The headquarters of this new Iraqi Army unit is located in Taji, where Iraq had attempted to assemble T-72s locally in the late 1980s. Some surviving T-72s are used for training, and the experience of Iraqi Army officers and crews with the T-72 was one of the reasons behind the choice of Hungarian T-72M1s.[4][5]

T-72 tanks saw service in the 1991 Persian Gulf War as well as the 2003 invasion of Iraq. Like other tanks in the Iraqi inventory, T-72s were mainly employed as armored self-propelled artillery, rather than in maneuver warfare roles. In operations, it fared poorly against American main battle tanks and armored fighting vehicles. For example, a 120 mm depleted uranium (DU) APFSDS round from an M1 Abrams could knock out a T-72 tank well beyond 3,000 m,[6] while the effective range of the APFSDS 125 mm shell used by Iraq was 1,800 m.[7] The Iraqi T-72s used 3BM9 APFSDS shells (removed from Soviet service in 1973),[8] with a penetration only 245 mm at a distance of up to 2,500 meters (8,200 ft).[9]

The Iraqi T-72s, like most T-72 export versions, lacked then-modern night vision systems, though they did have some night fighting tanks with older active infrared systems or floodlights - just not the latest starlight scopes and passive infrared scopes as on the Abrams.[10]

Within closer ranges, the T-72 was more effective, especially while within prepared positions.[11] However, even in such conditions, the T-72 did not fare well against M1s—as proven in the Battle of Norfolk during Desert Storm,[12] although the tank also participated in the Battle of Phase Line Bullet, where Bradley IFVs from the 4th squadron of the 7th Cavalry Regiment were driven back by dug-in Iraqi armoured vehicles at heavy cost.[13]

Despite the relative thinness, a retrofitted reinforced armor plate present both at the turret and the front upper hull seems to have been relatively effective against some shaped-charge ordnance, like the TOWs and Hellfire missiles. There are reports of Iraqi T-72s surviving near-misses from these weapons, although the reinforced armor generally did not prevent a mobility kill. However, it is also possible that the unexpected survival rate was due to the electro-optical countermeasures mounted on most of the tanks rather than the added armor.[14][15][16][17] There is evidence of at least one T-72 surviving a direct hit from an Abrams main gun in Mahmoudiyah in 2003. A 120 mm HEAT round from an Abrams impacted on the front of an Asad Babil turret at point blank range without producing a catastrophic kill.[18] Some T-72 tanks may have featured explosive reactive armor, possibly obtained from Polish T-72M1 spare parts.[19]

Another improvised armor upgrade may have also been added at the Taji complex.[2] An additional 30 mm armor plate was welded on the front areas of the hull and turret, leaving an air gap matching the size of the armor, so that the power of a HEAT jet could be dissipated in the hollow space. This technique follows the principle of spaced armor. The Iraqi engineers tested this reinforcement against captured Iranian 120 mm Chieftain tank guns in 1989, apparently with some success.[20]

2003 Iraq War

A T-72 abandoned after the U.S. attack into Baghdad.

During the 2003 invasion of Iraq, the Republican Guard's T-72s, most from the Medina Division, were deployed around Baghdad to attempt a last-ditch defense of the Baath regime.[36] In April 2003, U.S. tanks engaged their counterparts from just 50 yards, killing seven Iraqi T-72s without any losses.[37] Such encounters exposed the poor marksmanship of Iraqi gunners, in part due to the shortage of modern night-vision and range-finder assets.[38] The T-72s were even more technologically lacking at this time, and it is not known if any improvements to the tanks were made between the Persian Gulf War and this conflict. Nonetheless, one Bradley was largely disabled by a 125 mm round from an Asad Babil tank when Iraqi armoured troops attempted to attack their American opponents near Baghdad airport.[39]

The last operational T-72s acquired from the USSR and Poland were destroyed by the successive waves of American armored incursions on the Iraqi capital[40] or abandoned by their crews after the fall of Baghdad, several of them without firing a single shot. The derelict tanks were later scrapped by U.S. Army disposal teams or shipped to the United States for target practice.

In the late 1980s, Iraq attempted to locally produce the T-72, a Soviet-made main battle tank. The tanks were to be assembled at a factory near Taji in the Baghdad Governorate.[44][45] The project was named Lion of Babylon (Arabic: أسد بابل, romanized: Asad Bābil). It was triggered in part by the American embargo against the sale of military vehicles to Iraq during the Iran–Iraq War. However, it is disputed how many tanks outlined in the project were finished, and likewise whether the Iraqi tanks reported to be "Lions of Babylon" during the Gulf War and Iraq War were merely imported T-72s. The project draws its name from the Lion of Babylon, an ancient Babylonian symbol that was based on the Asiatic lion and represented the king of Babylon as well as the goddess Ishtar.

In 1986 a West German company built a factory in Taji to manufacture steel for several military uses. It was enlisted to retrofit and rebuild tanks already on duty in the Iraqi Army, such as T-54/55s, T-62s, and several hundred of Soviet and Polish T-72s,[46] imported during early stages of the war with Iran.[2] In the late 1980s, plans were made to produce new T-72M1 tanks at that facility. These tanks were to be assembled from knockdown kits delivered by the Polish state-owned company Bumar-Łabędy.[47] The local assembly of the T-72 was to start early 1989, as suggested by Iraqi officials.[46] A number of Iraqi officials such as Lt. General Amer Rashid, however, did not like the idea of being dependent on knockdown kits supplied by another country and pushed for the complete production of the T-72M1 tank instead.[46][47] In 1991, the Taji plant was destroyed by an airstrike while being upgraded by Bumar-Łabędy.[47]

The United Nations imposed an arms embargo following the Iraqi invasion of Kuwait in August 1990, which reduced the complete assembly of tanks to simple spare parts for T-72s and other tanks in the Iraqi arsenal.[46] According to Polish officials, not a single T-72M1 had been assembled at the facility, even though in 1988 a T-72M was displayed on an Iraqi arms show, which was claimed to be locally produced.[47]

Specifications

Image showing the plate of laminated armor welded on the glacis of a T-72. Note the edges around the rectangular section of the towing eyes and driver's hatch.

In most aspects, the Lion of Babylon as proposed was physically identical to the T-72M1 it is based on.[48] Lion of Babylon T-72s were to be upgraded with the addition of laminated armor on the front slope and rear panels as protection against HEAT projectiles.[45]

American military intelligence believed some were equipped with Belgian-made thermal sights.[49] These same sources claim the tank was also supposed to be provided with a better track protection against sand and mud than the Soviet T-72, by reducing the original number of shock absorbers.[50][1] Some tanks also were fitted with a type of electro-optical interference pod of Chinese origin.[51][52] As secondary armament, the tank was to feature either the NSV or the DShK 12.7 mm machine gun and the coaxial 7.62 mm PKT common to all T-72 models. The Lion's primary armor was intended to be identical to that of T-72M1, without any improvements. The Lion's side armor was supposed to have 60 mm protection, the turret side armor 300 mm, and the flat rear 45 mm thick.[53]

Wikimedia Commons has media related to Asad Babil tanks.

• The Death Lobby: How the West armed Iraq by Ken Timmerman
• Yazīd Ṣāyigh, Markaz Dirāsāt al-Waḥdah al-ʻArabīyah: Arab military industry: capability, performance, and impact. Brassey's, 1992. ISBN 0-08-041777-9