Class (locomotive)

As locomotives became more numerous the need arose to deal with them in groups of similar engines rather than as named or numbered individuals. These groups were named "classes" and at first tended to reflect capability rather than design. For example, the Baltimore and Ohio Railroad grouped its roster into four classes before the Civil War, though they had by that point dozens of different designs.

Later classes were based on design. A group of locomotives built off the same blueprints constituted a class, and if some of the locomotives in the class were sufficiently modified, a new class might be established for the modified examples. When electric locomotives were introduced, the same scheme was applied to them.

Since steam and early electric locomotives were usually custom built, classes were assigned by the railroad, and each railroad had its own system. Mergers of lines and sales of locomotives brought about changes of class. Early diesels were often fitted into the locomotive class system, but since they were generally not custom built the use of manufacturer model designations overtook the class system and made it irrelevant, except for historical discussion.

Usually, the class system for a railroad was built on a simple hierarchy, to which each class was assigned a code.

The first level was usually for the wheel arrangement and was usually coded by a letter of the alphabet. Different railroads used different codes, so while, for instance, the designation of "J" on the New York Central Railroad meant a 4-6-4 (Hudson), on the Norfolk and Western Railway it signified a 4-8-4 (Northern), and on the Baltimore and Ohio Railroad it denoted a 4-4-0 with a Wootten firebox.

Classification of Articulated locomotives was handled through varying methods. On many railroads each wheel arrangement was assigned its own unique letter, due to the limited number of arrangements that had to be represented. On other railroads this was insufficient, and articulated locomotives would be represented with a two letter code, one letter for the arrangement of each half. The Pennsylvania Railroad GG1 (UIC 2Co+Co2) is an example of this classification method; on the Pennsylvania, “G” denoted a 4-6-0 or “ten-wheeler”, and the GG1 design was, in effect, two ten-wheelers coupled end-to-end (by virtue of its wheel arrangement).

A sequence number was often added to distinguish different designs of the same wheel arrangement. As a general rule the first design for a given arrangement often had no sequence number, so that numbering stated at 1 with the second design for the wheel arrangement. For example, there were two main classes of 2-10-2 locomotives on the B&O, labelled "S" and "S-1".

Letter suffixes were often used to indicate variants in a basic design. Sometimes these also referred to specific characteristics; for example, for many years the Pennsylvania Railroad used a "s" suffix to indicate superheating, while on the B&O a "t" suffix indicated an engine with an oversize tender.

Most locomotives were given simple codes, but some classes were named or nicknamed, formally and informally.

• The Union Pacific’s 4-8-8-4s are said to have been earned the nickname “Big Boy” when the moniker was scrawled on the smokebox of one of the locomotives when it was built.
• The Baltimore and Ohio Railroad’s P-7 class of 4-6-2s was referred to as the "President" class, as each locomotive initially had the name of a U.S. President on the cab.
• The Baltimore and Ohio’s S and S-1 classes of 2-10-2 were often referred to as "Big Sixes" since all members of the class was numbered in the 6000s.

The class number was usually taken from the first member of each class, e.g. "5700 Class" or "57XX Class" for locomotives in the number series beginning 5700.

Each class was given a letter or number but these were not very meaningful. For example, "700" Class locomotives were 0-6-0s, but so were "Q" Class engines. See: SR Q class, SR Q1 class

Each locomotive was given a power classification, e.g. "3F". However, many different classes would have the same power classification so this was not helpful for identifying classes. This system was adopted from the Midland Railway.

The LNER's classification system was the most helpful to railway enthusiasts. Each wheel arrangement was given a letter (e.g. A for 4-6-2, B for 4-6-0, etc.) and this was followed by a number denoting the class (e.g. A1, B1, etc.). This system was adopted from the Great Northern Railway, which used a similar classification scheme.