Logo Motion

A match is 135 seconds long.

• Autonomous - first 15 seconds. Code on the robots is remotely activated, and robots may react to sensor inputs and commands programmed into the robot's onboard control system. The robot tries to score Ubertubes onto pegs on the scoring grid.
• Teleoperated - 105 seconds after the Autonomous Period. Humans using a console drive their robots around the field, trying to score points using any game piece except for Ubertubes.
• Minibot Race - final 15 seconds. At fifteen seconds to the end, the tower bases flash their alliance color. Minibots may be deployed onto the towers in the final 10 seconds to score extra points. They may only be deployed during this period. The robots can still score the game tubes.[5]

As per previous years' competitions, three teams are on each alliance, red and blue.[9] Each team may have one robot on the field. That robot may be remotely controlled by a driver after the autonomous period.

LogoMotion field

As per previous years' competitions, the playing field is 27-feet wide by 54-feet long.[10] The floor consists of gray carpet. On each end of the field, there are scoring grids immediately in front of the alliance stations, where robots are remotely controlled by drivers. Each alliance station is protected by a wall, known as the alliance wall. On each alliance wall, there are two scoring grids. Each scoring grid has 9 pegs arranged like a square. Each row is 37 inches above the next, except on the outside columns in each grid, where the bottom peg is only 30 inches above the ground.

There are openings in the alliance wall, called feeding slots, in every corner, where an alliance member may enter playing pieces into play. However, to get from the scoring grid to your alliance's feeding slot, you must transverse the field. Thus, many teams elect to throw tubes onto the field and have their alliance's robots pick them from the ground.

Four towers with cylindrical bases are in the middle of the field. The towers are used in the endgame for alliances to earn up to 30 or more points. To assist teams in driving and programming a robot through an almost completely open field, there is colored tape on the floor to allow for sensor calibration and to create visual reference points. Furthermore, the tape delineates areas where certain robots may or may not traverse.[5]

• Ubertube - a yellow, circular inner tube. It may only be used during the autonomous period.
• Minibot - an FTC robot or a normal small robot

The following make up the FIRST Logo.

• Triangle - a red, triangular inner tube
• Circle - a white, circular inner tube
• Square - a blue, square inner tube[5]

Teams 3357 and 857 scoring tubes at the Traverse City district.

The following is a scoring chart for the Ubertube as they are hung on the end field walls, during the autonomous period.

The following is a scoring chart for the game pieces as they are hung on the end field walls, during tele-operated mode (human remote controlled period). Any tube that is part of a non-Ubertube triangle-circle-square group (depicting the FIRST logo) is worth double of the listed points.

The following is a scoring chart for the mini-bot, a smaller FTC robot deployed during the end game period. The end game is a race between four mini bots to reach the top of tower pole on the field.

Based on the information above, the number of points an alliance may score is capped at 158, as game pieces may not be de-scored.[11]

Source:[5]

Robot rules are similar to other years with the exception of the minibot. A notable difference is that while a robot must start the match within 38"x28"x60", it may expand to an 84" diameter cylinder with no height constraints.[5] Minibot has to be 12"x12"x12" and it can't be used during the match before the Minbot race.