Long reach excavator

A long reach excavator[1] is a type of excavator where the arm has been extended to reach farther than a normal excavator would. It is often used in demolition of buildings, but it can also be used in other applications.

History

The term long reach excavator was probably first coined by Richard Melhuish, the Chairman of Land & Water. During the 1970s Land & Water operated the UK's first hire fleet of these new and innovative long reach hydraulic excavators. In fact they still operate the largest fleet of long-reaches in the UK. Land & Water's first long reach excavator was the Hymac 580 BT All Hydraulic 360 “Waterway” machine, designed for work on waterways.[2] These early machines from Hymac came to be widely preferred to the more traditional drag lines designs.[2]

Around the same time Priestman (and later Ruston Bucyrus) VC (Variable Counterweight) excavators started to become more popular. However, the work VC machines could achieve was slightly constrained by design limitations compared to fully hydraulic "long reach" machines, especially with the arrival of more reliable machines from Japan built by manufacturers such as Hitachi and Komatsu. These Japanese designed machines hardly ever leaked hydraulic fluid.[2]

Applications

Long reach machines are not suitable for the high side twisting forces that can be exerted by demolition attachments and many demolition machines are unstable at large radius – so they are often assisted with electronic cut off devices that restrict the operating radius of the machine. Long reach machines are particularly useful in dredging operations.[2]

A long reach excavator being used to demolish an office building in Rosslyn, Virginia

The high reach excavator is a development of the excavator with an especially long boom arm, that is primarily used for demolition. Instead of excavating ditches, the high reach excavator is designed to reach the upper stories of buildings that are being demolished and pull down the structure in a controlled fashion. It has largely replaced the wrecking ball as the primary tool for demolition.

UHD demolishing a high-rise building

Ultra high reach demolition excavators (UHD) are demolition excavators with several tens of meters of reach.[3][4] Reaches of up to 48 metres (157 ft) are in operation as of 2016. As of 2017 there are UHD machines that can reach 67 metres (220 ft).

Trivia

The long reach excavator imported to New Zealand for demolitions of tall buildings following the 2010 and 2011 earthquakes has been nicknamed Twinkle Toes. It is the largest excavator in the Southern Hemisphere.[5][6]

References
  1. "9 Types of Excavators - a Complete Guide - Yandram.com". 2022-09-24. Retrieved 2023-02-21.
  2. "Long Reach Excavators - Land & Water Plant Hire". www.land-water.co.uk.
  3. "Long reach equipment simplifies demolition", worldhighways.com. First published in World Highways March 2010 as "Breaking down structures".
  4. "Caterpillar introduce the new 340F demolition excavator - Agg-Net". www.agg-net.com.
  5. Wright, Michael (16 November 2011). "Twinkle Toes tackles largest project to date". The Press. Retrieved 13 September 2012.
  6. Wright, Michael (17 November 2011). "Firms target high-rise buildings". The Press. Retrieved 13 September 2012.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.