meta-Chloroperoxybenzoic acid

*meta*-Chloroperoxybenzoic acid
Names
	Preferred IUPAC name 3-Chlorobenzene-1-carboperoxoic acid
	Other names 3-Chloroperoxybenzoic acid; 3-Chloroperbenzoic acid; 3-Chlorobenzoperoxoic acid; meta-Chloroperoxybenzoic acid; m-Chloroperoxybenzoic acid; meta-Chloroperbenzoic acid; mCPBA; m-CPBA
Identifiers
CAS Number	937-14-4 ;
3D model (JSmol)	Interactive image;
ChemSpider	63480 ;
ECHA InfoCard	100.012.111
EC Number	213-322-3;
PubChem CID	70297;
RTECS number	SD9470000;
UNII	G203D4H1RB;
UN number	3106
CompTox Dashboard (EPA)	DTXSID0061325 ;
	InChI InChI=1S/C7H5ClO3/c8-6-3-1-2-5(4-6)7(9)11-10/h1-4,10H Key: NHQDETIJWKXCTC-UHFFFAOYSA-N ; InChI=1S/C7H5ClO3/c8-6-3-1-2-5(4-6)7(9)11-10/h1-4,10H Key: FQAWBGAIOYWONH-UHFFFAOYAN;
	SMILES ClC1=CC(C(OO)=O)=CC=C1;
Properties
Chemical formula	C7H5ClO3
Molar mass	172.56 g·mol−1
Appearance	White powder
Melting point	92 to 94 °C (198 to 201 °F; 365 to 367 K) decomposes
Acidity (pKa)	7.57
Hazards
	Occupational safety and health (OHS/OSH):
Main hazards	Oxidizing, corrosive, explosive
	GHS labelling:
Pictograms
Signal word	Danger
Hazard statements	H226, H314, H335
Precautionary statements	P210, P220, P233, P234, P240, P241, P242, P243, P260, P261, P264, P271, P272, P280, P301+P330+P331, P302+P352, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P332+P313, P333+P313, P337+P313, P362, P363, P370+P378, P403+P233, P403+P235, P405, P411, P420, P501
Related compounds
Related compounds	peroxyacetic acid; peroxybenzoic acid
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). verify (what is ?) Infobox references

meta-Chloroperoxybenzoic acid (mCPBA or mCPBA) is a peroxycarboxylic acid. It is a white solid often used widely as an oxidant in organic synthesis. mCPBA is often preferred to other peroxy acids because of its relative ease of handling.[1] mCPBA is a strong oxidizing agent that may cause fire upon contact with flammable material.[2]

Preparation and purification

mCPBA can be prepared by reacting m-chlorobenzoyl chloride with a basic solution of hydrogen peroxide, followed by acidification.[3]

It is sold commercially as a shelf-stable mixture that is less than 72% mCPBA, with the balance made up of m-chlorobenzoic acid (10%) and water.[1] The peroxyacid can be purified by washing the commercial material with a sodium hydroxide and potassium phosphate solution buffered at pH = 7.5.[2][4] Peroxyacids are generally slightly less acidic than their carboxylic acid counterparts, so one can extract the acid impurity by careful control of pH. The purified material is reasonably stable against decomposition if stored at low temperatures in a plastic container.

In reactions where the exact amount of mCPBA must be controlled, a sample can be titrated to determine the exact amount of active oxidant.

Reactions

The main areas of use are the conversion of ketones to esters (Baeyer-Villiger oxidation), epoxidation of alkenes (Prilezhaev reaction), conversion of silyl enol ethers to silyl α-hydroxy ketones (Rubottom oxidation), oxidation of sulfides to sulfoxides and sulfones, and oxidation of amines to produce amine oxides. The following scheme shows the epoxidation of cyclohexene with mCPBA.

The epoxidation mechanism is concerted: the cis or trans geometry of the alkene starting material is retained in the epoxide ring of the product. The transition state of the Prilezhaev reaction is given below:[5]

The geometry of the transition state, with the peracid bisecting the C-C double bond, allows the two primary frontier orbital interactions to occur: π_C=C (HOMO) to σ*_O-O (LUMO) and n_O (HOMO, regarded as a filled p orbital on a sp² hybridized oxygen) to π*_C=C (LUMO), corresponding, in arrow-pushing terms, to formation of one C-O bond and cleavage of the O-O bond and formation of the other C-O bond and cleavage of the C=C π bond.

References

"3-Chloroperoxybenzoic acid". Organic Chemistry Portal.
Rao, A. Somasekar; Mohan, H. Rama; Charette, André (2005). "m‐Chloroperbenzoic Acid". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rc140.pub2. ISBN 0471936235.
McDonald, Richard N.; Steppel, Richard N. & Dorsey, James E. (1970). "m-Chloroperbenzoic Acid". Organic Syntheses. 50: 15. doi:10.15227/orgsyn.050.0015.
Armarego, W. L. F.; Perrin, D. D. (1996). Purification of Laboratory Chemicals (4th ed.). Oxford: Butterworth-Heinemann. p. 145. ISBN 0-7506-3761-7.
Li, Jie Jack (2003). Name Reactions: A Collection of Detailed Reaction Mechanisms (2nd ed.). Berlin, Heidelberg, New York: Springer. p. 323. ISBN 978-3-662-05338-6.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[portal-1] "3-Chloroperoxybenzoic acid". Organic Chemistry Portal.

[eros-2] Rao, A. Somasekar; Mohan, H. Rama; Charette, André (2005). "m‐Chloroperbenzoic Acid". Encyclopedia of Reagents for Organic Synthesis. doi:10.1002/047084289X.rc140.pub2. ISBN 0471936235.

[3] McDonald, Richard N.; Steppel, Richard N. & Dorsey, James E. (1970). "m-Chloroperbenzoic Acid". Organic Syntheses. 50: 15. doi:10.15227/orgsyn.050.0015.

[4] Armarego, W. L. F.; Perrin, D. D. (1996). Purification of Laboratory Chemicals (4th ed.). Oxford: Butterworth-Heinemann. p. 145. ISBN 0-7506-3761-7.

[Li-2003-5] Li, Jie Jack (2003). Name Reactions: A Collection of Detailed Reaction Mechanisms (2nd ed.). Berlin, Heidelberg, New York: Springer. p. 323. ISBN 978-3-662-05338-6.