Magneto-optic effect

In particular, in a magneto-optic material the presence of a magnetic field (either externally applied or because the material itself is ferromagnetic) can cause a change in the permittivity tensor ε of the material. The ε becomes anisotropic, a 3×3 matrix, with complex off-diagonal components, depending on the frequency ω of incident light. If the absorption losses can be neglected, ε is a Hermitian matrix. The resulting principal axes become complex as well, corresponding to elliptically-polarized light where left- and right-rotating polarizations can travel at different speeds (analogous to birefringence).

More specifically, for the case where absorption losses can be neglected, the most general form of Hermitian ε is:

${\displaystyle \varepsilon ={\begin{pmatrix}\varepsilon _{xx}'&\varepsilon _{xy}'+ig_{z}&\varepsilon _{xz}'-ig_{y}\\\varepsilon _{xy}'-ig_{z}&\varepsilon _{yy}'&\varepsilon _{yz}'+ig_{x}\\\varepsilon _{xz}'+ig_{y}&\varepsilon _{yz}'-ig_{x}&\varepsilon _{zz}'\\\end{pmatrix}}}$

or equivalently the relationship between the displacement field D and the electric field E is:

${\displaystyle \mathbf {D} =\varepsilon \mathbf {E} =\varepsilon '\mathbf {E} +i\mathbf {E} \times \mathbf {g} }$

where ${\displaystyle \varepsilon '}$ is a real symmetric matrix and ${\displaystyle \mathbf {g} =(g_{x},g_{y},g_{z})}$ is a real pseudovector called the gyration vector, whose magnitude is generally small compared to the eigenvalues of ${\displaystyle \varepsilon '}$. The direction of g is called the axis of gyration of the material. To first order, g is proportional to the applied magnetic field:

${\displaystyle \mathbf {g} =\varepsilon _{0}\chi ^{(m)}\mathbf {H} }$

where ${\displaystyle \chi ^{(m)}\!}$ is the magneto-optical susceptibility (a scalar in isotropic media, but more generally a tensor). If this susceptibility itself depends upon the electric field, one can obtain a nonlinear optical effect of magneto-optical parametric generation (somewhat analogous to a Pockels effect whose strength is controlled by the applied magnetic field).

The simplest case to analyze is the one in which g is a principal axis (eigenvector) of ${\displaystyle \varepsilon '}$, and the other two eigenvalues of ${\displaystyle \varepsilon '}$ are identical. Then, if we let g lie in the z direction for simplicity, the ε tensor simplifies to the form:

${\displaystyle \varepsilon ={\begin{pmatrix}\varepsilon _{1}&+ig_{z}&0\\-ig_{z}&\varepsilon _{1}&0\\0&0&\varepsilon _{2}\\\end{pmatrix}}}$

Most commonly, one considers light propagating in the z direction (parallel to g). In this case the solutions are elliptically polarized electromagnetic waves with phase velocities ${\displaystyle 1/{\sqrt {\mu (\varepsilon _{1}\pm g_{z})}}}$ (where μ is the magnetic permeability). This difference in phase velocities leads to the Faraday effect.

For light propagating purely perpendicular to the axis of gyration, the properties are known as the Cotton-Mouton effect and used for a Circulator.

Kerr rotation and Kerr ellipticity

Kerr rotation and Kerr ellipticity are changes in the polarization of incident light which comes in contact with a gyromagnetic material. Kerr rotation is a rotation in the plane of polarization of transmitted light, and Kerr ellipticity is the ratio of the major to minor axis of the ellipse traced out by elliptically polarized light on the plane through which it propagates. Changes in the orientation of polarized incident light can be quantified using these two properties.

Circular Polarized Light

According to classical physics, the speed of light varies with the permittivity of a material:

${\displaystyle v_{p}={\frac {1}{\sqrt {\epsilon \mu }}}}$

where ${\displaystyle v_{p}}$ is the velocity of light through the material, ${\displaystyle \epsilon }$ is the material permittivity, and ${\displaystyle \mu }$ is the material permeability. Because the permittivity is anisotropic, polarized light of different orientations will travel at different speeds.

This can be better understood if we consider a wave of light that is circularly polarized (seen to the right). If this wave interacts with a material at which the horizontal component (green sinusoid) travels at a different speed than the vertical component (blue sinusoid), the two components will fall out of the 90 degree phase difference (required for circular polarization) changing the Kerr ellipticity.

A change in Kerr rotation is most easily recognized in linearly polarized light, which can be separated into two circularly polarized components: Left-handed circular polarized (LHCP) light and right-handed circular polarized (RHCP) light. The anisotropy of the magneto-optic material permittivity causes a difference in the speed of LHCP and RHCP light, which will cause a change in the angle of polarized light. Materials that exhibit this property are known as birefringent.

From this rotation, we can calculate the difference in orthogonal velocity components, find the anisotropic permittivity, find the gyration vector, and calculate the applied magnetic field[1] ${\displaystyle \mathbf {H} }$.

• Zeeman effect
• QMR effect
• Magneto-optic Kerr effect
• Faraday effect
• Voigt Effect
• Photoelectric effect

• Federal Standard 1037C and from MIL-STD-188
• Lev Davídovich Landau; Evgeniĭ Mikhaĭlovich Lifshit︠s︡ (1960). Electrodynamics of continuous media. Pergamon Press. p. 82. ISBN 9780080091051. Retrieved 3 June 2012.
• Jackson, John David (1998). Classical electrodynamics (3rd ed.). New York: Wiley. pp. 6–10. ISBN 978-0471309321.
• Jonsson, Fredrik; Flytzanis, Christos (1 November 1999). "Optical parametric generation and phase matching in magneto-optic media". Optics Letters. 24 (21): 1514. Bibcode:1999OptL...24.1514J. doi:10.1364/OL.24.001514. PMID 18079850.
• Pershan, P. S. (1 January 1967). "Magneto-Optical Effects". Journal of Applied Physics. 38 (3): 1482–1490. Bibcode:1967JAP....38.1482P. doi:10.1063/1.1709678.
• Freiser, M. (1 June 1968). "A survey of magnetooptic effects". IEEE Transactions on Magnetics. 4 (2): 152–161. Bibcode:1968ITM.....4..152F. doi:10.1109/TMAG.1968.1066210.
• Broad band magneto-optical spectroscopy

 This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22.