Marcy South

Marcy South is a 2 circuit high voltage power line in the U.S. State of New York. Each circuit is 345,000 volts, the one circuit runs from Fraser Substation in Delaware County to Marcy Substation in Oneida County and the other circuit runs from Coopers Corners Substation to the Marcy Substation. It was constructed amid heavy controversy in the late 1980s by the New York Power Authority.[1]

Marcy South
Location
CountryUnited States
StateNew York
FromMarcy Substation
ToFraser Substation / Coopers Corners Substation
Ownership information
OwnerNew York Power Authority
Technical information
Type of currentAC
AC voltage345,000
No. of circuits2

History

The Power Authority of the State of New York announced plans to deliver hydroelectric power from Canada to the New York City region in 1982.

It became fully operational on June 1, 1988.

Controversy

The power line met with vigorous and sometimes highly contentious and violent opposition from local property owners from its proposition to its planning and surveying, and even its construction.[1]

Power grid improvement

The Marcy South Series Compensation Project began in 2016 and involved the installation of three series capacitor banks. The capacitor banks were installed to raise the voltage and keep it constant, which enhances transmission efficiency. Two capacitor banks were installed by New York Power Authority, the other installed by NYSEG at the Fraser Substation.[2]

Future plans

Since its construction, other projects including a high-voltage DC line have been proposed for the same route.

References

  1. "Archived copy". Archived from the original on December 25, 2014. Retrieved June 2, 2017.{{cite web}}: CS1 maint: archived copy as title (link)
  2. "NYPA COMPLETES ELECTRIC GRID PROJECT TO IMPROVE RELIABILITY AND BRING MORE RENEWABLE ENERGY DOWNSTATE". nypa.gov. nypa. 2016. Retrieved September 22, 2017. data


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.