Milepost equation

A milepost equation, milepoint equation, or postmile equation is a place where mileposts on a linear feature, such as a highway or rail line, fail to increase normally, usually due to realignment or changes in planned alignment.[1][2] In order to make mileposts consistent with the real mileage, every milepost beyond the equation would need to be moved.[3]

For example, an equation of 7.6 back = 9.2 ahead means that the feature does not have any section between mile 7.6 and mile 9.2, and the distance between mileposts 7 and 10 is only 1.4 miles. This would usually be caused by a relocation that shortened the distance by 1.6 miles. It is also possible for an equation to add mileage to what it would otherwise be; the duplicated mileposts receive a special prefix, such as Z.[1]

See also

References
  1. "ODOT Approved Terms & Definitions". Oregon Department of Transportation. Archived from the original on June 24, 2007. Retrieved August 7, 2020.
  2. "STB Docket No. AB-33 (Sub-No. 220X)". Federal Register. 69 (190). October 1, 2004. Archived from the original on August 7, 2020. Retrieved August 7, 2020.
  3. "UDOT Milepost Project: Project Plan". Utah Department of Transportation. Archived from the original on August 7, 2007. Retrieved August 7, 2020.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.