Miniemulsion

A miniemulsion (also known as nanoemulsion) is a particular type of emulsion. A miniemulsion is obtained by shearing a mixture comprising two immiscible liquid phases (for example, oil and water), one or more surfactants and, possibly, one or more co-surfactants (typical examples are hexadecane or cetyl alcohol). They usually have nanodroplets with uniform size distribution (20–500 nm) and are also known as sub-micron, mini-, and ultra-fine grain emulsions.[1]

Schematic illustration of nanoemulsion structure, including the biphasic systems (O/W or W/O), in which an appropriate volume of the internal oil phase is disseminated in the bulk aqueous solution or vice versa; and the multiple systems (W/O/W or O/W/O), within a single system, the inner water phase is dispersed in an oil phase, which is then dispersed in a bulk aqueous phase or vice versa[2].

How to prepare a miniemulsion

  1. Selection of ingredients: The first step in creating a nanoemulsion is to select the ingredients, which include the oil, water, and emulsifying agent. The type and proportions of these ingredients will affect the stability and properties of the final emulsion.[3]
  2. Preparation of oil and aqueous phases: The oil and water phases are separately prepared, with any desired ingredients, such as surfactants or flavoring agents, added at this step.
  3. Mixing oil and emulsifier with stirrer: Next, the oil and water phases are mixed in the presence of an emulsifying agent, typically using a high-shear mixing device such as a homogenizer or a high-pressure homogenizer.[4]
  4. Aging and stabilization: The emulsion is typically aged at room temperature to allow the droplets to stabilize, after which it can be cooled or heated as required.[4]
  5. Optimizing and characterization: The droplet size and stability are then optimized by adjusting the ingredients and process parameters, such as temperature, pH, and mixing conditions. The nanoemulsion is also sterilized by filtration with 0.22μm. Several methods, such as DLS, TEM, and SEM, can characterize the final nanoemulsion's properties.[5]
  6. Analyzing the quality of the particle sizer
IUPAC definition

Mini-emulsion: emulsion in which the particles of the dispersed phase have diameters in the range from approximately 50 nm to 1 μm.

Note 1: Mini-emulsions are usually stabilized against diffusion degradation (Ostwald ripening (ref.[6] )) by a compound insoluble in the continuous phase.

Note 2: The dispersed phase contains mixed stabilizers, e.g., an ionic surfactant, such as sodium dodecyl sulfate (n-dodecyl sulfate sodium) and a short aliphatic chain alcohol ("co-surfactant") for colloidal stability, or a water-insoluble compound, such as a hydrocarbon ("co-stabilizer" frequently and improperly called a "co-surfactant") limiting diffusion degradation. Mini-emulsions are usually stable for at least several days.[7]

Mini-emulsion polymerization: Polymerization of a mini-emulsion of monomer in which all of the polymerization occurs within preexisting monomer particles without the formation of new particles.[8]

Methods of preparing nanoemulsions/miniemulsions

There are two general types of methods for preparing miniemulsions:

  • High-energy methods - For the high-energy methods, the shearing proceeds usually via exposure to high power ultrasound[9][10][11] of the mixture or with a high-pressure homogenizer, which are high-shearing processes.
  • Low-energy methods - For the low-energy methods, the water-in-oil emulsion is usually prepared and then transformed into an oil-in-water miniemulsion by changing either composition or temperature. The water-in-oil emulsion is diluted dropwise with water to an inversion point or gradually cooled to a phase inversion temperature. The emulsion inversion point and phase inversion temperature cause a significant decrease in the interfacial tension between two liquids, thereby generating very tiny oil droplets dispersed in the water.[12]

Miniemulsions are kinetically stable but thermodynamically unstable.[13] Oil and water are incompatible in nature, and the interface between them is not favored. Therefore, given a sufficient amount of time, the oil and water in miniemulsions separate again. Various mechanisms such as gravitational separation, flocculation, coalescence, and Ostwald ripening result in instability.[14] In an ideal miniemulsion system, coalescence and Ostwald ripening are suppressed thanks to the presence of the surfactant and co-surfactant.[9] With the addition of surfactants, stable droplets are then obtained, which have typically a size between 50 and 500 nm.[15][16]

Instruments needed in Nanoemulsions

Sterile filter

A sterile filter is a device used to remove microorganisms and other contaminants from a liquid or gas, making it sterile.[17][18] Sterile filters are commonly used in the medical, pharmaceutical, and biotech industries to ensure that the products produced are free of bacteria and other harmful organisms.

There are different types of filters which include:

  • Membrane filters: These filters use a porous membrane to block microorganisms and other particles physically.[19][20] They are available in different pore sizes and materials, such as cellulose acetate, polypropylene, and nylon, to suit different applications.[21]
  • Depth filters: These filters use a matrix of fibers, beads, or powders to trap particles and microorganisms.[22] Examples of depth filters include cellulose, glass fiber, and diatomaceous earth.[23]
  • Adsorptive filters: These filters use adsorbent materials, such as activated carbon, or specialized resins or beads, to remove certain types of contaminants by chemical adsorption.[24][25][26]

Nanogenizer

A nanogenizer, also known as a high-pressure homogenizer or a microfluidizer, is a device used to create small droplets or particles by applying high pressure to a liquid mixture.[27][28] These devices can be used to produce nanoemulsions, as well as other types of emulsions and suspensions.[29] They work by passing the mixture through a small orifice under high pressure, which causes the liquid to be sheared and broken into small droplets or particles. The size of the droplets or particles can be controlled by adjusting the pressure and the design of the orifice.[30]

Nanoparticle sizer

non particle analyzer
The dual-light particle analyzer

A nanoparticle sizer, also known as a nanoparticle analyzer, is a device used to measure the size, size distribution, and concentration of nanoparticles in a sample.[31][32] The size of nanoparticles is typically in the range of 1 to 100 nanometers (nm), and they are much smaller than the particles that can be measured with conventional particle size analyzers.[33][34]

Applications

Miniemulsions have wide application in the synthesis of nanomaterials and in the pharmaceutical and food industries.[35][36] For example, miniemulsion-based processes are, therefore, particularly adapted for the generation of nanomaterials. There is a fundamental difference between traditional emulsion polymerisation and a miniemulsion polymerisation. Particle formation in the former is a mixture of micellar and homogeneous nucleation, particles formed via miniemulsion however are mainly formed by droplet nucleation. In the pharmaceutical industry, oil droplets act as tiny containers that carry water-insoluble drugs, and the water provides a mild environment that is compatible with the human body.[37][38] Moreover, nanoemulsions that carry drugs allow the drugs to crystallize in a controlled size with a good dissolution rate.[39][40] Finally, in the food industry, miniemulsions can not only be loaded with water-insoluble nutrients, such as beta-carotene and curcumin, but also improve the nutrients' digestibility.[12]

References

  1. Moghassemi, Saeid; Dadashzadeh, Arezoo; Azevedo, Ricardo Bentes; Amorim, Christiani A. (1 November 2022). "Nanoemulsion applications in photodynamic therapy". Journal of Controlled Release. 351: 164–173. doi:10.1016/j.jconrel.2022.09.035. ISSN 0168-3659.
  2. Moghassemi, Saeid; Dadashzadeh, Arezoo; Azevedo, Ricardo Bentes; Amorim, Christiani A. (1 November 2022). "Nanoemulsion applications in photodynamic therapy". Journal of Controlled Release. 351: 164–173. doi:10.1016/j.jconrel.2022.09.035. ISSN 0168-3659.
  3. Delmas, Thomas; Piraux, Hélène; Couffin, Anne-Claude; Texier, Isabelle; Vinet, Françoise; Poulin, Philippe; Cates, Michael E.; Bibette, Jérôme (2011-03-01). "How To Prepare and Stabilize Very Small Nanoemulsions". Langmuir. 27 (5): 1683–1692. doi:10.1021/la104221q. ISSN 0743-7463. PMID 21226496.
  4. Albert, Claire; Beladjine, Mohamed; Tsapis, Nicolas; Fattal, Elias; Agnely, Florence; Huang, Nicolas (2019-09-10). "Pickering emulsions: Preparation processes, key parameters governing their properties and potential for pharmaceutical applications". Journal of Controlled Release. 309: 302–332. doi:10.1016/j.jconrel.2019.07.003. ISSN 0168-3659. PMID 31295541. S2CID 195892409.
  5. Jesser, Emiliano; Yeguerman, Cristhian; Gili, Valeria; Santillan, Graciela; Murray, Ana Paula; Domini, Claudia; Werdin-González, Jorge Omar (2020-06-01). "Optimization and Characterization of Essential Oil Nanoemulsions Using Ultrasound for New Ecofriendly Insecticides". ACS Sustainable Chemistry & Engineering. 8 (21): 7981–7992. doi:10.1021/acssuschemeng.0c02224. hdl:11336/144299. ISSN 2168-0485. S2CID 219489077.
  6. Richard G. Jones; Edward S. Wilks; W. Val Metanomski; Jaroslav Kahovec; Michael Hess; Robert Stepto; Tatsuki Kitayama, eds. (2009). Compendium of Polymer Terminology and Nomenclature (IUPAC Recommendations 2008) ("The Purple Book"). RSC Publishing. ISBN 978-1-84755-942-5.
  7. Slomkowski, Stanislaw; Alemán, José V.; Gilbert, Robert G.; Hess, Michael; Horie, Kazuyuki; Jones, Richard G.; Kubisa, Przemyslaw; Meisel, Ingrid; Mormann, Werner; Penczek, Stanisław; Stepto, Robert F. T. (2011). "Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011)" (PDF). Pure and Applied Chemistry. 83 (12): 2229–2259. doi:10.1351/PAC-REC-10-06-03. S2CID 96812603.
  8. Slomkowski, Stanislaw; Alemán, José V.; Gilbert, Robert G.; Hess, Michael; Horie, Kazuyuki; Jones, Richard G.; Kubisa, Przemyslaw; Meisel, Ingrid; Mormann, Werner; Penczek, Stanisław; Stepto, Robert F. T. (2011). "Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011)" (PDF). Pure and Applied Chemistry. 83 (12): 2229–2259. doi:10.1351/PAC-REC-10-06-03. S2CID 96812603.
  9. Mason TG, Wilking JN, Meleson K, Chang CB, Graves SM, "Nanoemulsions: formation, structure, and physical properties", Journal of Physics: Condensed Matter, 2006, 18(41): R635-R666
  10. Peshkovsky A, Peshkovsky S, "Acoustic Cavitation Theory and Equipment Design Principles for Industrial Applications of High-Intensity Ultrasound", Physics Research and Technology, Nova Science Pub. Inc., October 31, 2010, ISBN 1-61761-093-3
  11. "Translucent Oil-in-Water Nanoemulsions", Industrial Sonomechanics, LLC, 2011
    "Nanoemulsions Used for Parenteral Nutrition", Industrial Sonomechanics, LLC, 2011
    "Drug-Carrier Liposomes and Nanoemulsions", Industrial Sonomechanics, LLC, 2011
  12. Gupta, Ankur; Eral, H. Burak; Hatton, T. Alan; Doyle, Patrick S. (2016). "Nanoemulsions: formation, properties and applications". Soft Matter. 12 (11): http://pubs.rsc.org/-/content/articlehtml/2016/sm/c5sm02958a. Bibcode:2016SMat...12.2826G. doi:10.1039/C5SM02958A. hdl:1721.1/107439. PMID 26924445. S2CID 40966606.
  13. Capek, Ignác (2004-03-19). "Degradation of kinetically-stable o/w emulsions". Advances in Colloid and Interface Science. 107 (2–3): 125–155. doi:10.1016/S0001-8686(03)00115-5. ISSN 0001-8686. PMID 15026289.
  14. Jafari, Seid Mahdi; McClements, D. Julian (2018). Nanoemulsions: Formulation, Applications, and Characterization 1st Edition. Academic Press. p. 10. ISBN 978-0128118382.
  15. Gauthier, Gaëlle; Capron, Isabelle (2021-12-01). "Pickering nanoemulsions: An overview of manufacturing processes, formulations, and applications". JCIS Open. 4: 100036. doi:10.1016/j.jciso.2021.100036. ISSN 2666-934X. S2CID 244683109.
  16. Sarheed, Omar; Dibi, Manar; Ramesh, Kanteti V. R. N. S. (2020-12-17). "Studies on the Effect of Oil and Surfactant on the Formation of Alginate-Based O/W Lidocaine Nanocarriers Using Nanoemulsion Template". Pharmaceutics. 12 (12): 1223. doi:10.3390/pharmaceutics12121223. ISSN 1999-4923. PMC 7766092. PMID 33348692.
  17. Themes, U. F. O. (2021-05-09). "Sterile Filtration of Liquids and Gases". Basicmedical Key. Retrieved 2023-01-12.
  18. Kumar, Manish; Bishnoi, Ram Singh; Shukla, Ajay Kumar; Jain, Chandra Prakash (2019-09-30). "Techniques for Formulation of Nanoemulsion Drug Delivery System: A Review". Preventive Nutrition and Food Science. 24 (3): 225–234. doi:10.3746/pnf.2019.24.3.225. ISSN 2287-1098. PMC 6779084. PMID 31608247.
  19. "The various types of membrane filters and their uses". Next Day Science. Retrieved 2023-01-12.
  20. "Filter Sterilisation - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2023-01-12.
  21. "Membrane Filter - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2023-01-12.
  22. Baker, Richard; Baker, Richard W. (2004-05-31). Membrane Technology and Applications. John Wiley & Sons. ISBN 978-0-470-85445-7.
  23. "Depth Filter - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2023-01-12.
  24. Edwards, Marc; Benjamin, Mark M. (1989). "Adsorptive Filtration Using Coated Sand: A New Approach for Treatment of Metal-Bearing Wastes". Research Journal of the Water Pollution Control Federation. 61 (9/10): 1523–1533. ISSN 1047-7624. JSTOR 25043770.
  25. "Adsorption Is The Key | Resources | Danamark Watercare". Danamark. 2018-06-20. Retrieved 2023-01-12.
  26. Onur, Aysu; Ng, Aaron; Batchelor, Warren; Garnier, Gil (2018). "Multi-Layer Filters: Adsorption and Filtration Mechanisms for Improved Separation". Frontiers in Chemistry. 6: 417. Bibcode:2018FrCh....6..417O. doi:10.3389/fchem.2018.00417. ISSN 2296-2646. PMC 6143674. PMID 30258839.
  27. "High-Pressure Homogenisation - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2023-01-12.
  28. "Everything You Should Know About Homogenization". AZoNano.com. 2022-06-28. Retrieved 2023-01-12.
  29. "NanoGenizer High Pressure Homogenizer for Nanomaterials". Technology Networks. Retrieved 2023-01-12.
  30. Broniarz-Press, L.; Włodarczak, S.; Matuszak, M.; Ochowiak, M.; Idziak, R.; Sobiech, Ł.; Szulc, T.; Skrzypczak, G. (2016-04-01). "The effect of orifice shape and the injection pressure on enhancement of the atomization process for pressure-swirl atomizers". Crop Protection. 82: 65–74. doi:10.1016/j.cropro.2016.01.005. ISSN 0261-2194.
  31. Aljeldah, Mohammed Mubarak; Yassin, Mohamed Taha; Mostafa, Ashraf Abdel-Fattah; Aboul-Soud, Mourad AM (2023-01-06). "Synergistic Antibacterial Potential of Greenly Synthesized Silver Nanoparticles with Fosfomycin Against Some Nosocomial Bacterial Pathogens". Infection and Drug Resistance. 16: 125–142. doi:10.2147/IDR.S394600. PMC 9831080. PMID 36636381. S2CID 255592211.
  32. "Dual-Light Nano Particle Sizer". www.genizer.com. Retrieved 2023-01-12.
  33. "Nanoparticle Size - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2023-01-12.
  34. Hoshyar, Nazanin; Gray, Samantha; Han, Hongbin; Bao, Gang (March 2016). "The effect of nanoparticle size on in vivo pharmacokinetics and cellular interaction". Nanomedicine. 11 (6): 673–692. doi:10.2217/nnm.16.5. ISSN 1743-5889. PMC 5561790. PMID 27003448.
  35. Azmi, Nor Azrini Nadiha; Elgharbawy, Amal A. M.; Motlagh, Shiva Rezaei; Samsudin, Nurhusna; Salleh, Hamzah Mohd (September 2019). "Nanoemulsions: Factory for Food, Pharmaceutical and Cosmetics". Processes. 7 (9): 617. doi:10.3390/pr7090617. ISSN 2227-9717.
  36. Ashaolu, Tolulope Joshua (2021-08-01). "Nanoemulsions for health, food, and cosmetics: a review". Environmental Chemistry Letters. 19 (4): 3381–3395. doi:10.1007/s10311-021-01216-9. ISSN 1610-3661. PMC 7956871. PMID 33746662.
  37. Guo, Yi; Teo, Victoria L.; Ting, S. R. Simon; Zetterlund, Per B. (May 2012). "Miniemulsion polymerization based on in situ surfactant formation without high-energy homogenization: effects of organic acid and counter ion". Polymer Journal. 44 (5): 375–381. doi:10.1038/pj.2012.7. ISSN 1349-0540.
  38. Aizpurua, Imanol; Barandiaran, Marı́a J. (1999-06-01). "Comparison between conventional emulsion and miniemulsion polymerization of vinyl acetate in a continuous stirred tank reactor". Polymer. 40 (14): 4105–4115. doi:10.1016/S0032-3861(98)00641-7. ISSN 0032-3861.
  39. Azeem, Adnan; Rizwan, Mohammad; Ahmad, Farhan J.; Iqbal, Zeenat; Khar, Roop K.; Aqil, M.; Talegaonkar, Sushama (March 2009). "Nanoemulsion Components Screening and Selection: a Technical Note". AAPS PharmSciTech. 10 (1): 69–76. doi:10.1208/s12249-008-9178-x. ISSN 1530-9932. PMC 2663668. PMID 19148761.
  40. Jacob, Shery; Nair, Anroop B.; Shah, Jigar (December 2020). "Emerging role of nanosuspensions in drug delivery systems". Biomaterials Research. 24 (1): 3. doi:10.1186/s40824-020-0184-8. ISSN 2055-7124. PMC 6964012. PMID 31969986.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.