North Carolina Highway 66

North Carolina Highway 661
North Carolina Highway 661
Location	Rural Hall–Johnstown
Existed	1921–1935

North Carolina Highway 64
North Carolina Highway 64
Location	Lexington–Winston-Salem
Existed	1921–1925

North Carolina Highway 66
North Carolina Highway 66
	NC 66 highlighted in red
Route information
	Maintained by NCDOT
Length	47.0 mi[1] (75.6 km)
Existed	1934–present
Major junctions
South end	I-74 near Horneytown
	I-40 near Kernersville; US 421 / NC 150 in Kernersville; US 158 near Walkertown; US 311 in Walkertown;
North end	NC 89 in Johnstown
Location
Country	United States
State	North Carolina
Counties	Forsyth, Stokes
Highway system
	North Carolina Highway System; Interstate; US; State; Scenic;

North Carolina Highway 66 (NC 66) is a 47.0-mile (75.6 km) North Carolina state highway that travels from Horneytown to Johnstown, connecting the towns and communities of eastern Forsyth and Stokes counties.

Route description

NC 66 begins at exit 63 of I-74 in Horneytown. From there, the highway continues north and meets I-40 at exit 203. After NC 66 crosses over US 421 and it passes an intersection with NC 150 in Kernersville. NC 66 continues northwest towards Rural Hall. Once NC 66 reaches Rural Hall, it runs parallel to US 52 until King. South of King NC 66 heads north towards Gap. The highway then runs through the mountains of curvy roads until reaching its northern terminus at a Y-intersection with NC 89.[1]

History

The first NC 66 was an original state highway. It began at NC 60 and NC 65 the current intersection of 4th Street and Cherry Street in Winston-Salem. NC 66 then headed north along today's University Parkway to Stanleyville. From there, NC 66 continues up to Pilot Mountain. In late 1921, NC 66 was extended to NC 89, in Westfield. In 1922, NC 66 was rerouted to Mount Airy. Then NC 66 went north to the Virginia state line. In 1923, NC 66 was rerouted to go from Mount Airy to Virginia State Route 15 at the state line. In 1925, NC 66 was rerouted to follow Patterson Avenue into Winston-Salem. From there, NC 66 replaced NC 64 to Lexington. In 1926, US 121 was assigned the entire routing of NC 66. In 1934, US 52 replaced both US 121 and NC 66 in entirety. The current NC 66 was designated in late 1934 as a renumbering of NC 661. It went from US 52 (old NC 66) in Rural Hall to NC 89 to the north. In 1936, NC 66 was routed along US 52 to Stanleyville. Then NC 66 was extended to US 421 (current Old Greensboro Road) along new routing. Between 1947 and 1949, NC 66 was routed south of Walkertown. In 1955, NC 66 was extended along US 421 to Kernersville and then on new primary routing to US 311.

North Carolina Highway 64

North Carolina Highway 64 (NC 64) was an original state highway that traversed from NC 10, in Lexington, north to NC 60/NC 77 (Waughtown Street), in Winston-Salem. In 1925, NC 64 was renumbered as an extension of NC 66.

In 1932, NC 64 reappeared as a mostly new primary routing; except around Coleridge, where it replaced part of NC 902. It traversed from US 421/NC 60 (Liberty Road), in Greensboro, going southeast through Climax, Franklinville, Ramseur, Coleridge and Bennett, to NC 74 (today NC 24/NC 27), west of Carthage. In late 1934, NC 64 was renumbered as NC 22.

North Carolina Highway 661

North Carolina Highway 661 (NC 661) was an original state highway that traversed from NC 66, in King, to NC 89, in Moores Springs. In 1923, NC 661 was extended northwest along NC 89 to Francisco, then replaced NC 893 to the Virginia state line. In 1924, NC 661 was rerouted at Gap to NC 89 west of Francisco then east along NC 89 to Francisco before continuing to the state line, leaving behind Moore Springs Road (SR 1001). In 1926, NC 661 was rerouted on both ends: south-end to NC 66, in Rural Hall, and north-end being truncated at NC 89, in the Johnstown community; its old segment northeast of NC 89 became a secondary road, later becoming part of NC 704. In 1935, NC 661 was renumbered as part of NC 66.

Major intersections

County	Location	mi[1]	km	Destinations	Notes
Forsyth		0.0– 0.2	0.0– 0.32	I-74 – Winston-Salem, High Point	Exit 63 (I-74)
	Kernersville	4.8– 4.9	7.7– 7.9	I-40 – Winston-Salem, Greensboro	Exit 203 (I-40)
	Kernersville	6.8– 6.9	10.9– 11.1	US 421 / NC 150 – Winston-Salem, Greensboro	Exit 222 (US 421)
	Walkertown	13.2	21.2	US 158 – Winston-Salem, Stokesdale
	Walkertown	14.5	23.3	US 311 – Winston-Salem
	Winston-Salem	20.5	33.0	NC 8 – Winston-Salem, Germanton
		21.5– 21.7	34.6– 34.9	NC 74 (Winston-Salem Northern Beltway)	Partial cloverleaf interchange; exit 42 (NC 74), Opened to traffic on November 7, 2022[2]
	Rural Hall	24.8	39.9	NC 65 – Germanton
Stokes		40.6	65.3	NC 268 west – Pilot Mountain	West end of NC 268 overlap
		40.7	65.5	NC 268 east	East end of NC 268 overlap
	Johnstown	47.0	75.6	NC 89 – Westfield, Francisco
1.000 mi = 1.609 km; 1.000 km = 0.621 mi Concurrency terminus

References

Google (November 12, 2022). "North Carolina Highway 66" (Map). Google Maps. Google. Retrieved November 12, 2022.
Young, Wesley (November 7, 2022). "A new section of the Winston-Salem Northern Beltway has opened". Winston-Salem Journal. Retrieved November 12, 2022.

External links

Template:Attached KML/North Carolina Highway 66

KML is from Wikidata

Media related to North Carolina Highway 66 at Wikimedia Commons
NCRoads.com: N.C. 64
NCRoads.com: N.C. 66
NCRoads.com: N.C. 661

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[google-1] Google (November 12, 2022). "North Carolina Highway 66" (Map). Google Maps. Google. Retrieved November 12, 2022.

[2] Young, Wesley (November 7, 2022). "A new section of the Winston-Salem Northern Beltway has opened". Winston-Salem Journal. Retrieved November 12, 2022.