Orvieto Funicular

The Orvieto Funicular (Italian: Funicolare di Orvieto) is a funicular railway in the Italian city of Orvieto. It connects Orvieto station with Piazza Cahen in the city centre, which is situated on a volcanic rock 157 metres (515 feet) above the station. The line passes through the rampart, which surrounds the city centre, in a tunnel.[2]

Orvieto Funicular
The lower station
Service
TypeFunicular
Technical
Line length580 metres (1,903 ft)
Track gauge1,445 mm (4 ft 8+78 in)[1]
Looking up the funicular
Looking down the tunnel under the ramparts

The line was originally built in 1888, and took the form of water-ballast counterbalanced funicular. This line was in use until 1970, when it was abandoned. Twenty years later, in 1990, a new electrically hauled funicular was built on the route of the old.[2]

The cars of the new line are unmanned, and the whole line is controlled by a single controller in the upper station. The line operates every 15 minutes, or more frequently if traffic demands it. It has the following parameters:[2][3][4]

Number of stops 2
Configuration single track with passing loop
Track length 580 metres (1,903 ft)
Rise 157 metres (515 ft)
Average gradient 28%
Number of cars 2
Maximum speed 6 metres per second (19.69 ft/s)
Average travel time 116 seconds
Capacity 75 passengers per car

At the upper station, the funicular connects with two routes operated by electric minibuses that serve the city centre.[4]

See also

References

  1. Trams of the World 2013 - Tramway.com Archived 2014-03-15 at the Wayback Machine
  2. "The new funicular of Orvieto - Presentation". Funimag. Retrieved 2013-07-02.
  3. "The new funicular of Orvieto - Map & Datas". Funimag. Retrieved 2013-07-02.
  4. "Mobilità Alternativa Città di Orvieto" [Alternative Mobility City of Orvieto] (in Italian). ATC Services SpA. Archived from the original on 2007-09-29. Retrieved 2013-07-02.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.