Oxidation of alcohols to carbonyl compounds
The oxidation of alcohols to carbonyls (ketone or aldehydes) is an important oxidation reaction in organic chemistry. This only occurs with primary and secondary alcohols. (R' can be a carbon or hydrogen)
![](../I/Alcohol_general_oxidation_to_carbonyls.png.webp)
When a alcohol is oxidized, it is converted to either a ketone or aldehyde. Secondary alcohols form ketones, while primary alcohols form aldehydes. The hydrogen from the hydroxyl group is lost along with the hydrogen bonded to the carbon attached to oxygen. The remaining oxygen then forms double bonds with the carbon. This leaves a carbonyl. Aldehydes are easy to oxidize further. While ketones are quite resistant to further oxidation as it would require breaking an adjacent C–C bond, but with strong oxidants this may occur and produces esters or carboxylic acids.[1]
The reaction can occur using a variety of oxidants. (R' can be a carbon or hydrogen)
![](../I/Alcohol_oxidation_to_carbonyls.svg.png.webp)
Ketone formation
Potassium dichromate
A secondary alcohol can be oxidised into a ketone using acidified potassium dichromate and heating under reflux. The orange-red dichromate ion, Cr2O72−, is reduced to the green Cr3+ ion. This reaction was once used in an alcohol breath test.
PCC (Pyridinium chlorochromate)
Pyridinium chlorochromate (PCC), when used in an organic solvent, can be used to oxidise a secondary alcohol into a ketone. It has the advantage of doing so selectively without the tendency to over-oxidise.
Dess–Martin oxidation
The Dess–Martin periodinane is a mild oxidant for the conversion of alcohols to aldehydes or ketones.[2]
The reaction is performed under standard conditions, at room temperature, most often in dichloromethane. The reaction takes between half an hour and two hours to complete. The product is then separated from the spent periodinane.[3]
Swern oxidation
Swern oxidation oxidises secondary alcohols into ketones using oxalyl chloride and dimethylsulfoxide. It also requires an organic base, such as triethylamine.
![](../I/Swern_Oxidation_Scheme.png.webp)
The by-products are dimethyl sulfide (Me2S), carbon monoxide (CO), carbon dioxide (CO2) and – when triethylamine is used as base – triethylammonium chloride (C6H15NHCl). Dimethyl sulfide and carbon monoxide are very toxic and malodorous compounds, so the reaction and the work-up needs to be performed in a fume hood or outdoors.
Oppenauer oxidation
![](../I/Oppenauer.png.webp)
Fétizon oxidation
Silver carbonate on celite oxidizes alcohols through single electron oxidation by the silver cations.
![](../I/Fetizon's_reagent_mechanism.jpg.webp)
Aldehyde formation
PCC (Pyridinium chlorochromate)
Pyridinium chlorochromate (PCC), when used in an organic solvent, can be used to oxidise a primary alcohol into an aldehyde. It has the advantage of doing so selectively without the tendency to over-oxidise. So it will not oxidize the aldehyde, which is highly prone to oxidization.
Dess–Martin oxidation
The Dess–Martin periodinane is a mild oxidant for the conversion of alcohols to aldehydes or ketones.[2]
The reaction is performed under standard conditions, at room temperature, most often in dichloromethane. The reaction takes between half an hour and two hours to complete. The product is then separated from the spent periodinane.[3]
References
- Burton, George et al. (2000). Salters Advanced Chemistry: Chemical (2nd ed.). Heinemann. ISBN 0-435-63120-9
- Dess, D. B.; Martin, J. C. J. Am. Chem. Soc. 1991, 113, 7277–87.
- J. S. Yadav, et al. "Recyclable 2nd generation ionic liquids as green solvents for the oxidation of alcohols with hypervalent iodine reagents", Tetrahedron, 2004, 60, 2131–35