PICMG 1.2

PICMG 1.2 is a specification by PICMG that standardizes both mechanical and electrical interfaces to support a standard form factor PCI computer system. PICMG 1.2 defines a single board computer in a passive backplane architecture with either two PCI/PCI-X busses or a single PCI/PCI-X bus.[1] It is similar to PICMG 1.0 but removes the ISA bus.[2]

Status

Adopted : 1/23/2002

Current Revision : 1.0

References

"PICMG 1.2, EMBEDDED PCI-X SPECIFICATION". PICMG. Archived from the original on 2009-01-20. Retrieved 2009-11-11.
"Embedded PCI-X (ePCI-X) for Standard Form Factor PCI". PICMG. Archived from the original on 2014-07-14.; "Embedded PCI-X (ePCI-X) for Standard Form Factor PCI". PICMG. Archived from the original on 2007-01-09.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] "PICMG 1.2, EMBEDDED PCI-X SPECIFICATION". PICMG. Archived from the original on 2009-01-20. Retrieved 2009-11-11.

[2] "Embedded PCI-X (ePCI-X) for Standard Form Factor PCI". PICMG. Archived from the original on 2014-07-14.; "Embedded PCI-X (ePCI-X) for Standard Form Factor PCI". PICMG. Archived from the original on 2007-01-09.