Panther Model 120

The Panther Model 120 was a British motorcycle made between 1959 and 1966 by Phelon & Moore. An enlarged Panther Model 100, the 120 had a reputation for being less reliable with a tendency for rapid clutch wear, problematical roller bearings and heavy oil consumption. As competitors produced modern designs, Panther ran into trouble obtaining supplies of Burman gearboxes and Lucas Magdynos, so production ceased in 1966 and the company was wound up.[1]

Panther Model 120
ManufacturerPhelon & Moore
Production1959–1965
Engine646 cc. ohv single
Power27 bhp (20 kW) at 4,500 rpm
TransmissionBurman Four speed. Multi-plate clutch in oil
Brakes8 inch front drum
7 inch rear drum
TiresFront tyre 3.25 x 19 inch
Rear tyre 3.50 x 19 inch
Wheelbase59 inches (1,500 mm)
DimensionsL: 83 inches (2,100 mm)
Seat height28 inches (710 mm)
Weight426 lb (193 kg) (dry)
Fuel consumption55 mpg‑imp (5.1 L/100 km; 46 mpg‑US)

Development

The Panther sloper engine designed by Granville Bradshaw remained unchanged for 25 years and the 650 cc 'heavyweight' had many of the Model 100 components. The increased capacity was achieved by boring out the Model 100 cylinder by 1 mm and increasing the stroke by 6 mm. As well as increased low speed torque this improved acceleration and top end cruising speed.[2]

This put additional strain on the main bearings and crankcases, leading to reliability problems. The 120 also suffered with lubrication problems from the large sump cast into the front of the engine. Oil was pumped to the top of the sloper engine but return was erratic and oil consumption very heavy.[1] The main shaft was redesigned with larger ball journal main bearings, A smaller exhaust valve combined with a larger Amal monobloc carburettor gave the Model 120 28 bhp at 4500 rpm, an increase of 4 bhp over the Model 100.[2]

Motorcycle sidecars were popular at the end of the 1950s, so the Model 120 was provided with a purpose built sidecar chassis, connected by a three-point mounting which provided minimal alignment problems. The front and rear wheels were designed to be interchangeable, and the sidecar chassis wheel was made the same size.[3] The sidecar had swinging arm suspension with an Armstrong shock absorber.[2] A trailer with a towbar was also provided as an option.[1]

The end

By 1962 Phelon & Moore were in financial trouble and went into receivership. The Model 120 stayed in production for as long as the supply of spare parts lasted, but they finally ran out in 1966 and the company folded. It wasn't quite the end for the big Panther, however, as they were cheap and economical and continued to sell for another year after production ended.[1] Panther Model 120's are still being maintained and used regularly to this day by enthusiasts.[4]

  • Model 120, right side
    Model 120, right side
  • Model 120, left side
    Model 120, left side

See also

References
  1. Kemp, Andrew; De Cet (2004). Classic British Bikes. Mirco. Bookmart Ltd. ISBN 978-1-86147-136-9.
  2. "The Big Cat - The Model 120". Retrieved 19 November 2008.
  3. Jones, Barry, M (2009). The Panther Story - The Story of Phelon & Moore Ltd. High Wycombe: Panther Publishing Ltd. p. 269. ISBN 978-0-9556595-6-0.{{cite book}}: CS1 maint: multiple names: authors list (link)
  4. "Panther". Retrieved 19 November 2008.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.