Parasitic drag

Parasitic drag, also known as profile drag,[1]:254[2]:256 is a type of aerodynamic drag that acts on any object when the object is moving through a fluid. Parasitic drag is a combination of form drag and skin friction drag.[3][1]:641–642[4]:19 It affects all objects regardless of whether they are capable of generating lift.

Drag curve for a lifting body in steady flight

Total drag on an aircraft is made up of parasitic drag and lift-induced drag. Parasitic drag is named as such because it is not useful, whereas lift-induced drag is the result of an airfoil generating lift. Parasitic drag comprises all types of drag except lift-induced drag.[5]

Form drag

Form drag arises because of the shape of the object. The general size and shape of the body are the most important factors in form drag; bodies with a larger presented cross-section will have a higher drag than thinner bodies; sleek ("streamlined") objects have lower form drag. Form drag follows the drag equation, meaning that it increases with the square of the velocity, and thus becomes more important for high-speed aircraft.

Form drag depends on the longitudinal section of the body. A prudent choice of body profile is essential for a low drag coefficient. Streamlines should be continuous, and separation of the boundary layer with its attendant vortices should be avoided.

Form drag includes interference drag, caused by the mixing of airflow streams. For example, where the wing and fuselage meet at the wing root, two airstreams merge into one. This mixing can cause eddy currents, turbulence, or restrict smooth airflow. Interference drag is greater when two surfaces meet at perpendicular angles, and can be minimised by the use of fairings.[6][7][5]

Wave drag, also known as supersonic wave drag or compressibility drag, is a component of form drag caused by shock waves generated when an aircraft is moving at transonic and supersonic speeds.[1]:25,492,573

Form drag is a type of pressure drag,[1]:254 a term which also includes lift-induced drag.[1]:65,319 Form drag is pressure drag due to separation.[1]:641–642[2]:256

Skin friction drag

Skin friction drag arises from the friction of the fluid against the "skin" of the object that is moving through it. Skin friction arises from the interaction between the fluid and the skin of the body, and is directly related to the wetted surface, the area of the surface of the body that is in contact with the fluid. Air in contact with a body will stick to the body's surface and that layer will tend to stick to the next layer of air and that in turn to further layers, hence the body is dragging some amount of air with it. The force required to drag an "attached" layer of air with the body is called skin friction drag. Skin friction drag imparts some momentum to a mass of air as it passes through it and that air applies a retarding force on the body. As with other components of parasitic drag, skin friction follows the drag equation and rises with the square of the velocity.

Skin friction is caused by viscous drag in the boundary layer around the object. The boundary layer at the front of the object is usually laminar and relatively thin, but becomes turbulent and thicker towards the rear. The position of the transition point from laminar to turbulent flow depends on the shape of the object. There are two ways to decrease friction drag: the first is to shape the moving body so that laminar flow is possible. The second method is to increase the length and decrease the cross-section of the moving object as much as practicable. To do so, a designer can consider the fineness ratio, which is the length of the aircraft divided by its diameter at the widest point (L/D). It is mostly kept 6:1 for subsonic flows. Increase in length increases Reynolds number (). With in the denominator for skin friction coefficient's relation, as its value is increased (in laminar range), total friction drag is reduced. While decrease in cross-sectional area decreases drag force on the body as the disturbance in air flow is less. For wings of an aircraft, a decrease in length (chord) of the wings will reduce "induced" drag though, if not the friction drag.

The skin friction coefficient, , is defined by

where is the local wall shear stress, and q is the free-stream dynamic pressure.[8] For boundary layers without a pressure gradient in the x direction, it is related to the momentum thickness as

For comparison, the turbulent empirical relation known as the One-seventh Power Law (derived by Theodore von Kármán) is:

where is the Reynolds number.[2]:Formula 4.101

For a laminar flow over a plate, the skin friction coefficient can be determined using the formula:[9]

See also

References

  1. Anderson, John D., Jr. (1991). Fundamentals of aerodynamics (2nd ed.). New York: McGraw-Hill. ISBN 0-07-001679-8.{{cite book}}: CS1 maint: multiple names: authors list (link)
  2. Anderson, John D., Jr. (2016). Introduction to flight (Eighth ed.). New York, NY: McGraw Hill Education. p. 242. ISBN 978-0-07-802767-3.{{cite book}}: CS1 maint: multiple names: authors list (link)
  3. Clancy, L.J. (1975). Aerodynamics, Sub-section 5.9. Pitman Publishing. ISBN 0 273 01120 0
  4. Gowree, Erwin Ricky (20 May 2014). Influence of Attachment Line Flow on Form Drag (doctoral). Retrieved 22 March 2022.
  5. Pilot's Handbook of Aeronautical Knowledge (PDF). FAA. p. Chapter 5, Aerodynamics of flight. The first is called parasite because it in no way functions to aid flight, while the second, induced drag, is a result of an airfoil developing lift.
  6. "Interference Drag - SKYbrary Aviation Safety". 25 May 2021.
  7. "How Interference Drag Affects Your Plane's Performance".
  8. "Skin friction coefficient -- CFD-Wiki, the free CFD reference". www.cfd-online.com. Retrieved 22 April 2018.
  9. tec-science (2020-05-31). "Drag coefficient (friction and pressure drag)". tec-science. Retrieved 2020-06-25.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.