Phon

The phon is a logarithmic unit of loudness level for tones and complex sounds. Loudness is measured in sones, a linear unit. Human sensitivity to sound is variable across different frequencies; therefore, although two different tones may present an identical sound pressure to a human ear, they may be psychoacoustically perceived as differing in loudness. The purpose of the phon is to provide a logarithmic measurement (like decibels) for perceived sound magnitude, while the primary loudness standard methods result in a linear representation. A sound with a loudness of 1 sone is judged equally loud as a 1 kHz tone with a sound pressure level of 40 decibels above 20 micropascal.[1] The phon is psychophysically matched to a reference frequency of 1 kHz.[2] In other words, the phon matches the sound pressure level (SPL) in decibels of a similarly perceived 1 kHz pure tone.[3] For instance, if a sound is perceived to be equal in intensity to a 1 kHz tone with an SPL of 50 dB, then it has a loudness of 50 phons, regardless of its physical properties.[4] The phon was proposed in DIN 45631 and ISO 532 B by Stanley Smith Stevens.[5]

For other uses, see Phon (disambiguation).
Equal-loudness contours

Definition

By definition, the loudness level in phons of a sound is the sound pressure level (in dB SPL) of a 1-kHz pure tone that is judged as having the same loudness.[6] The phon unit is not an SI unit in metrology. It is defined as a unit of loudness level by the American National Standards Institute in the Acoustical Terminology standard ANSI/ASA S1.1-2013. Because the phon is a unit associated with a subjective percept, it is obtained by presenting the considered sound to a group of normal-hearing human listeners and by taking the median of the loudness levels they report.

Such measurements have been performed for known sounds, such as pure tones at different frequencies and levels. The equal-loudness contours are a way of mapping the dB SPL of a pure tone to the perceived loudness level in phons (see loudness for details).

See also

References
  1. William M. Hartmann, Signals, Sound, and Sensation, American Institute of Physics, 2004. ISBN 1-56396-283-7.
  2. "dB: What is a decibel?". www.animations.physics.unsw.edu.au. Retrieved 2019-01-12.
  3. Pease, C.B. (1974-07-01). "Combining the sone and phon scales". Applied Acoustics. 7 (3): 167–181. doi:10.1016/0003-682X(74)90011-5. ISSN 0003-682X.
  4. "Loudness Units: Phons and Sones". hyperphysics.phy-astr.gsu.edu. Retrieved 2019-01-12.
  5. UNSW Music Acoustics
  6. "phon". Welcome to ASA Standards. Acoustical Society of America. Retrieved 14 December 2020.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.