Polymethylpentene

Polymethylpentene (PMP), also known as poly(4-methyl-1-pentene), is a thermoplastic polyolefin. It is used for gas-permeable packaging, autoclavable medical and laboratory equipment, microwave components, and cookware. It is commonly called TPX, which is a trademark of Mitsui Chemicals.[1]

Poly(4-methyl-1-pentene)
Names
IUPAC name
Poly[1-(2-methylpropyl)ethylene]
Other names
Poly(4-methyl-1-pentene); PMP
Identifiers
ChemSpider
  • none
Properties
(C6H12)n
Molar mass Variable
Density 0.833 g/mL
Melting point 240 °C (464 °F; 513 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references

Production

Polymethylpentene is a 4-methyl-1-pentene-derived linear isotactic polyolefin and is made by Ziegler–Natta type catalysis. The commercially available grades are usually copolymers. It can be extruded and moulded (by injection moulding or blow moulding).

Physical properties

Polymethylpentene melts at ≈ 235 °C. It has a relatively low density (0.84 g/cm3) among plastics and is transparent. It has low moisture absorption, and exceptional acoustical and electrical properties. Its properties are reasonably similar to those of other polyolefins, although it is more brittle and more gas permeable. The polymer also has a high thermal stability, excellent dielectric characteristics and a high chemical resistance.[2] The crystalline phase has a lower density than the amorphous phase.[2]

Optical properties

In comparison to other materials being used for operating in THz range, TPX shows excellent optical properties with a wavelength independent refractive index of 1.460±0.005 between visible light and 100~GHz. While having a very good transmission in the THz area, TPX also shows a very wide transmition range spreading from UV to THz.[3]

Applications
  • Applications include sonar covers, speaker cones, ultrasonic transducer heads, and lightweight structural parts. It is also FDA compliant for use in food processing machinery. Polymethylpentene is often used in films and coatings for gas-permeable packaging.[4]
  • Because of its high melting point and good temperature stability, polymethylpentene is used for autoclavable medical and laboratory equipment, microwave components, and cookware.
  • It is also often used in electrical components e.g. LED molds because it is an excellent electrical insulator.
  • TPX is a hard, solid material, which can be mechanically shaped into various optical components like lenses and windows. It is used in CO2 laser pumped molecular lasers as an output window because it is transparent in the whole terahertz range and totally suppresses the ~10 μm pump radiation.

References
  1. Whiteley, Kenneth S.; Heggs, T. Geoffrey; Koch, Hartmut; Mawer, Ralph L.; Immel, Wolfgang (2000). "Polyolefins". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a21_487.
  2. Lopez, L. C., Wilkes, G. L., Stricklen, P. M., White, S. A. (1992). "Synthesis, Structure and Properties of Poly(4-Methyl-1-pentene)". Journal of Macromolecular Science, Part C. 32 (3–4): 301–406. doi:10.1080/15321799208021429.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  3. https://sinoptix.eu/2023/09/18/tpx-optics-buying-guide/
  4. "Polymethylpentene (TPX)". Archived from the original on 2013-05-04. Retrieved 2013-04-09.
  • Krentsel B.A., Kissin Y.V., Kleiner V.I., Stotskaya S.S. Polymers and Copolymers of Higher a-Olefins, Hanser Publishers: New York, 1997.
  • H. C. Raine, J. Appl. Polym. Sci. 11, 39 (1969).
  • Mitsui Chemicals Co., Properties of Standard TPX Grades, 2004.
  • FDA CFR Title 21 Sec. 177.1520 Olefin polymers (C) 3.3b for TPX(4-methylpentene-1-based olefin copolymer)
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.