Quad Electroacoustics
QUAD Electroacoustics is a British manufacturer of hi-fi equipment, based Huntingdon, Cambridgeshire. QUAD is part of the IAG Group, with corporate headquarters located in Shenzhen, China.
 | |
| Type | Private limited company |
|---|---|
| Industry | Home entertainment equipment manufacturing & distribution |
| Founded | 1936 |
| Headquarters | Huntingdon, Cambridgeshire |
| Products | Hi-fi equipment |
| Parent | International Audio Group |
| Website | www.quad-hifi.co.uk |
Corporate history
The company was founded by Peter J. Walker in 1936 in London, and was initially called S.P. Fidelity Sound Systems. In 1936 the name was changed to the Acoustical Manufacturing Co. Ltd. The company moved from London to Huntingdon in 1941 after being bombed out of London in World War II.
The company initially produced only public address equipment but after the war they began to produce equipment designed for use in the home as a result of the rising demand for high quality domestic sound reproduction. Within a few years the company had transitioned almost entirely to manufacturing models for the home audio market.
Peter Walker was quoted in December 1975 in ‘Wireless World’ magazine, "An audio power amplifier is required to produce an output signal that differs from the input signal in magnitude only. It must therefore have occurred to every circuit designer that it should be a simple matter to take a portion of the output, compare it with the input to derive an error signal. It is then only necessary to amplify the error signal and add it to the output in the correct amplitude and phase to cancel completely the distortion of the primary amplifier."
Peter put this principle into practice using two amplifiers per channel instead of one. The first stage ‘error’ amplifier is low powered but very high quality. The second amplifier is high powered, but of lesser audio high quality. (It's a lot more difficult to achieve very low distortion in high powered amplifier stages). Peter designed a way to compare the high powered output with the original audio input and derive the required error correction signal which is then injected into the audio path, in such a way that the high power audio output achieves a very low distortion figure, even at very high power levels. This innovative product earned Quad the Queen's Award for Technological Achievement in 1978.
Peter Walker was also attributed with the famous hifi quote "the perfect amplifier is a straight wire with gain" --- the implication being that nothing would be added, and nothing taken away from the signal, just a bigger version of the same thing at one end. It was an aim, a goal, a description of the perfect amplifier - nobody, including Mr. Walker, ever said they'd attained that goal, and even if they did, the chances were that they were severely handicapped by their test equipment at the time.
The name "QUAD" is an acronym for "Quality Unit Amplifier Domestic", used to describe the QUAD I amplifier. In 1983, when having become known for their QUAD range of products, the Acoustical Manufacturing Co. Ltd changed its name to QUAD Electroacoustics Ltd.
In 1995, QUAD Electroacoustics Ltd was bought by Verity Group plc, joining its existing brands of Wharfedale and Mission. A few changes were made, including shifting all production to Shenzhen, China.[1]
In September 1997 the company changed ownership again as Verity Group sold off businesses to finance its development of flat panel loudspeakers. With Wharfedale it became part of the Chinese International Audio Group under the management of Bernard and Michael Chang. Since Walker's death in 2003, the firm has had only its design ethos—"the closest approach to the original sound"—in common with the British hi-fi firm he founded in 1936.[2]
In 2003, a book was commissioned "QUAD The Closest Approach" which offered a history of the company from its creation to that point.
The company's founder, Peter J. Walker, died in 2003 at the age of 87. He had retired in the late 1980s, then turning management over to his son Ross Walker.
Audio products
The company's first products were released in 1948. The QA12 and QA12/P were low-powered mono valve designs. This unit's sound quality reproduction was high compared with other products on the market at the time, and was thus adopted for use by the BBC.
Amplification
Following the mass production of 'stereo' vinyl records in 1958, the QC 22 control unit was developed and released in 1959. This was a stereo control unit that was designed to be used with a pair of QUAD II mono power amplifiers. To complement the QUAD II, the company also produced AM and FM tuners for use with the QC II & 22 control units.
The company made the transition to transistor-powered models in 1966 with the "professional" QUAD 50 monoblock which had a tapped transformer output and in 1967 the consumer Quad 33 preamplifier and 303 stereo power amplifier combination.
- Control Unit – Pre Amplifiers
Quad 33 – 1967 to 1982 – 120,000 units
Quad 34 – 1982 to 1995 – 41,000 units
Quad 44 – 1979 to 1989 – 40,000 units
Quad 66 – 1986 to 1997 – 12,000 units
Quad 99 - 1999 to 2002
- Stereo Power Amplifier
Quad 303 – 1967 to 1985 – 94,000 units
- Monobloc Power Amplifier
Quad 50E - 1966 to 1983 - 12,000 units [3]
- Current Dumping Power Amplifiers
Quad 405 – 1975 to 1982 – 64,000 units
Quad 405–2 1982 to 1993 – 100,000 units
Quad 306 – 1986 to 1995 – 25,000 units
Quad 606 – 1986 to 1997 – 27,700 units
Quad 707 - 1997 to 1999
Quad 909 - 1999 to 2002
- Integrated Amplifier
Quad 77 - 1994 to 1999
Loudspeakers
In late 1949 (or early 1950), the company launched the CR corner ribbon loudspeaker. This used a Goodmans Axiom 150 cone loudspeaker for the lower frequencies and an electromagnetic ribbon loudspeaker, designed by Acoustical, for the higher frequencies. Fewer than one thousand units were sold.
In 1957, they released the Quad Electrostatic Loudspeaker (ESL), the first production full frequency range electrostatic loudspeaker renowned for sonic transparency and very low distortion. Its sonic neutrality and transparency were offset by its extreme directionality, moderate power handling, the need for a large room, and moderate bass extension; its novel electrical characteristics could render some amplifiers unstable, which could result in damage to either or both.
The ESL was quickly adopted by the BBC for monitoring the sound quality of their broadcasts. The BBC eventually replaced them with moving coil based monitor speakers developed by several manufacturers, such as the highly successful LS3/5A, that were more easily transported and stored, and were more representative of typical contemporary hi-fi speakers.
Quad launched ESL-63, successor to the original ESL, in 1981. The newer design featured larger panels and an innovative stator design, made up of eight concentric rings fed from the centre outwards through analogue delay lines, so that the audio signal radiated out as though emanating from a single point. Subsequent electrostatic models, the 988/989, the 2805/2905 and then the 2812/2912 were successive refinements of the ESL-63 design, featuring increased power handling and output levels, more sophisticated overload protection, and greater structural rigidity.
Following the Verity acquisition, Quad developed and market a range of conventional electrodynamic loudspeakers alongside its electrostatic line, available in both passive and active (i.e. featuring in-box amplification) configurations.
Many of Quad's products, including the Quad Electrostatic Loudspeaker (ESL-57), are still serviced by the company's Service Department in Huntingdon.
References
- CHINA: Behind the scenes at IAG | whathifi.com
- Wharfedale Achromatic WA-S1 Speaker System | Home Theater
- Stefaan (23 March 2007). "The Quad 50E revision, including 50D info". Quad Spot. Retrieved 28 December 2019.
The 50E has been produced from 1966 to 1983. The quantity that was sold counts up to 12.000. Although it shares the looks of a 303 it is a different amplifier.