R-17-class lifeboat

The R-17 class was a class of Polish-built lifeboats and salvage tugs, in Polish service between 1972 and 2011. Eight were built, two of which were used in East Germany.

Powiew in Ustka, 2010
Class overview
NameR-17 class
BuildersWisła Shipyard, Gdańsk
Operators
  • Polskie Ratownictwo Okrętowe
  • Morska Służba Poszukiwania i Ratownictwa
Succeeded bySAR-1500
Built1972–1975
In service1972–2011
Completed8
Retired8
Preserved?
General characteristics
Tonnage55 GRT
Length20.92 m
Beam5.58 m
Draught1.4 m
Propulsion2 × Wola-Henschel H6A diesel engines, 210 hp (157 kW) each, 2 screws
Speed11 knots (13 mph; 20 km/h)
Range600 nmi (1,100 km)
Capacity50
Complement5-8
Mistral in private hands, as recreational fishing boat Scirocco

History

In the 1960s design work commenced in Poland on new steel-hull lifeboats to replace a fleet of old, mostly wooden craft of several types used on the Polish Baltic Sea coast. The operator of lifeboats was the state-owned Polskie Ratownictwo Okrętowe (Polish Ship Salvaging), which was also responsible for marine salvage.[1] It was decided to build two series of craft, the larger R-27 and the smaller R-17 (the numbers coming from predicted hull lengths in meters, R standing for ratowniczy (rescue in Polish)).[2]

The smaller R-17 class was initially intended to be a pure lifeboat design, but eventually it was decided to add salvage capabilities as well. The resulting design was a small salvage tugs. First sketches were made by two Polish bureaus in 1966.[2] The hull was slightly longer than initially intended, but an interval 17 m was kept between outer frames.[2] The designs expected use of imported Western 300 hp Caterpillar engines, but in order to avoid import, the government ordered to use Polish built engines, which had a lower power output.[3] The low maximal speed (predicted 14 knots, eventually 11 knots) raised some discussion, but its increase would have demanded usage of heavier engines and increase of dimensions, while the priority was good sea-keeping qualities and possibility to operate on shallow waters near the coast.[3] The resulting vessel had very good seakeeping qualities in rough sea. Two engines were placed in separate compartments and powered two screws in order to increase reliability and manoeuvrability.[3]

The project was accepted in 1970/1971 and eight craft were ordered in the Wisła shipyard in Gdańsk.[3] They were classified in Poland as kuter ratowniczy (rescue cutter). Six vessels were built for Polskie Ratownictwo Okrętowe in total, while two were sold to German Democratic Republic.[3] The German vessels were not fitted with towing gear. In 1992, after German unification, both German vessels Stoltera and Arkona were donated to the Polish SAR service.[4] Until 1990s, the ships had stations listed below, some changed placed afterwards. In 2002 Polish SAR ships were handed over to government Morska Służba Poszukiwania i Ratownictwa (Maritime Search and Rescue Service). The last R-17 boats were withdrawn from service in 2011, most or all were sold to private hands.

Fleet

Name Translation In service Principal station Comments
Wiatr wind 1972–2000 Górki Zachodnie (Gdańsk)
Halny halny 1973–1997 Władysławowo
Mistral mistral 1973–2007 Dziwnów later recreational boat Scirocco
Monsun monsoon 1973–2000 Łeba
Stoltera (1974)
Powiew (1992)
Stoltera
wind gust
1974–2011 Warnemünde
Ustka
for GDR, in 1992 given to Poland
Arkona (1974)
Szkwał II (1992)
Arkona
squall II
1974–1998 Sassnitz
Kołobrzeg
for GDR, in 1992 given to Poland
Zefir zephyr 1975–2011 Darłowo
Pasat passat 1975–2002 Gdynia

Citations

  1. Rochowicz (2017), p. 72
  2. Rochowicz (2017), p. 73-74
  3. Rochowicz (2017), p. 74-76
  4. Rochowicz (2017), p. 81

References

  • Rochowicz, Robert (July 2017). "Statki ratownicze typów R-17 i R-27". Morze (in Polish). Vol. III, no. 22. Warsaw. ISSN 2543-5469. 7/2017.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.