RKS Liblice 2

The RKS Liblice 2 are two 355 m (1,165 ft) tall guyed masts located east of Prague near Liblice, in close proximity of the RKS Liblice 1. These lattice steel towers are built 120 m (390 ft) apart from each other, what formed a slightly directional radiation pattern directed towards Spanish Madrid transmitter on the same frequency. The masts carry a special anti-fading cage aerials. Designed by Jan Šťovíček, these supertall towers currently stand as the tallest towers in the world used for broadcasting in the medium-wave range. RKS Liblice-2 was built in 1976, and was used for broadcasting on 639 kHz until December 31st, 2021. During construction, two new transmitter devices of the type Tesla SRV 750 with an output power of 750 kW were installed. At first, these transmitters were switched in parallel for a transmission power of 1500 kW, after 1990 only 750 kW was used for broadcasting.

Masts of RKS Liblice 2 as viewed from a distance.
Close-up view of the masts of the towers.

History

The Blaw-Knox RKS Liblice was 280.4 m (919.9 ft) tall tower before it was demolished on August 11, 2004, in lieu of the construction of the current towers. The original tower were built in 1936, by Karlova Huť; these towers survived World War II without damages.

Events
  • On November 23, 1978, the transmission frequency of the new towers, which was 638 kHz since 1950, was changed to 639 kHz in order to fulfill the regulations of "waveplan" of Geneva.
  • On August 27, 2005, a skydiver jumped off one of the masts after gaining illegal access to it. His parachute became accidentally hooked to a backstage insulator. Fortunately, the incident did not get him too close to the cage antenna of the tower, which would likely have led to his death due to the presence of high frequency currents.
  • The broadcasts of Czech Radio Prog. 2 ceased with end of the year 2021.

See also


50°04′02″N 14°53′13″E

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.