Redundant elevators

Redundant elevators are additional elevators installed to guarantee greater accessibility of buildings and public transportation systems in the event that an elevator malfunctions. The United States Disability Rights Education and Defense Fund describes redundant elevators as a "best practice" and recommends all transit agencies "consider installing redundant elevators at all existing key stations with elevators in rapid, light, and commuter rail, and at all Amtrak stations with elevators."[1]

Redundant elevators in public transportation

Ottawa

Ottawa's OC Transpo has committed to installing redundant elevators at all transfer stations and stations where alternative accessible routes cannot be provided.[2]

Bay Area Rapid Transit

All Bay Area Rapid Transit stations have accessible elevators, however most stations lack redundant elevators. BART has committed to increasing elevator redundancy within its system.[3][4]

Connecticut Department of Transportation

Connecticut Department of Transportation policy states that at stations without redundant elevators, signage must be posted near all elevators displaying a 24-hour monitored telephone number that connects the passenger to a mobility taxi service.[5]

MBTA

As part of a 2006 agreement between the Massachusetts Bay Transportation Authority (MBTA) and the Boston Center for Independent Living, MBTA has agreed to install redundant elevators at stations in their system.[6]

Metropolitan Transportation Authority


Washington Metro

Since 2003, the Washington Metro has required that all newly constructed stations must have redundant elevators. As of 2021, all Washington Metro stations are wheelchair accessible but the majority of stations lack redundant elevators. 15 out of 91 stations have at least one redundant elevator, with redundant elevators planned for installation at four other stations.[7]

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.