Reverb effect

A reverb effect, or reverb, is an audio effect applied to a sound signal to simulate reverberation.[1] It may be created through physical means, such as echo chambers, or electronically through audio signal processing.

This article is about the audio effect. For the acoustic phenomenon, see Reverberation.

The American producer Bill Putnam is credited for the first artistic use of artificial reverb in music, on the 1947 song "Peg o' My Heart" by the Harmonicats. Spring reverb, created with a series of mounted springs, is popular in surf music and dub reggae. Shimmer reverb, which alters the pitch of the reverberated sound, is often used in ambient music. Gated reverb became a staple of 1980s pop music, used by drummers including Phil Collins.

Varieties

Echo chambers
Main article: Echo chamber

The first reverb effects, introduced in the 1930s, were created by playing recordings through loudspeakers in reverberating spaces and recording the sound.[2] The American producer Bill Putnam is credited for the first artistic use of artificial reverb in music, on the 1947 song "Peg o' My Heart" by the Harmonicats. Putnam placed a microphone and loudspeaker in the studio bathroom to create an echo chamber, adding an "eerie dimension".[1]

Plate reverb
The EMT 140 plate reverb system

A plate reverb system uses an electromechanical transducer, similar to the driver in a loudspeaker, to create vibrations in a large plate of sheet metal. The plate's motion is picked up by one or more contact microphones whose output is an audio signal which may be added to the original "dry" signal.[3] Plate reverb was introduced in the late 1950s by Elektromesstechnik with the EMT 140.[3][2]

Spring reverb
"Spring reverb" redirects here. For the album by the Big Wu, see Spring Reverb (album).
A spring reverb tank

Spring reverbs, introduced by Bell Labs, use a set of springs mounted inside a box.[1] They work similarly to plate reverb, with a transducer and pickup placed at either end of the spring.[2] They were popular in the 1960s, and were first used by the Hammond company to add reverb to Hammond organs.[1] They became popular with guitarists, including surf musicians such as Dick Dale,[1] as they could easily be built into guitar amplifiers.[1] They were also used by dub reggae musicians such as King Tubby.[1] The American engineer Laurens Hammond of the Hammond company was granted a patent on a spring reverb system in 1939.[4]

Digital reverb
A Strymon BigSky digital reverb

Digital reverb units simulate reverb by using multiple delay lines with fading trails, giving the impression of sound bouncing off surfaces. Some digital effects allow users to independently adjust early and late reflections.[2] Digital reverb was introduced in 1976 by EMT with the EMT 250,[2] and became popular in the 1980s.[1]

Gated reverb
Main article: Gated reverb

Gated reverb combines reverb with a noise gate, creating a "large" sound with a short tail.[5] It was pioneered by the English recording engineer Hugh Padgham and the drummer Phil Collins, and became a staple of 1980s pop music.[5]

Convolution reverb

Convolution uses impulse responses to record the reverberation of physical spaces and recreate them digitally.[1][6] The first real-time convolution reverb processor, the DRE S777, was announced by Sony in 1999.[2] Convolution reverb is often used in film production, with sound engineers recording impulse responses of sets and locations so sounds can be added in post-production with realistic reverberation.[7]

Shimmer reverb

Shimmer reverb alters the pitch of the reverberated sound, an effect often used in ambient music.[8]

References
  1. Weir, William (2012-06-21). "How humans conquered echo". The Atlantic. Retrieved 2021-08-08.
  2. "A brief history of reverb". MusicRadar. 2014-06-24. Retrieved 2021-08-08.
  3. Eargle, John M. (2005). Handbook of Recording Engineering (4 ed.). Birkhäuser. p. 233. ISBN 0-387-28470-2.
  4. Laurens Hammond, Electrical Musical Instrument, U.S. Patent 2,230,836, granted Feb. 4, 1941.
  5. December 2020, Stuart Williams 31. "How Genesis's Peter Gabriel and Phil Collins stumbled upon the '80s gated-reverb drum sound". MusicRadar. Retrieved 2021-06-19.
  6. White, Paul (March 2006). "Choosing the right reverb". Sound on Sound. Retrieved 2021-12-28.
  7. "What is convolution reverb and how is it created?". Mixdown Magazine. 2018-12-18. Retrieved 2021-10-23.
  8. White, Paul (July 2020). "Creating Shimmer Reverb Effects". Sound on Sound. Retrieved 2023-01-13.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.