Rover 14

Rover's first 14 was no more than a renamed 12. Introduced in 1912 designed by Clegg it became known as Rover's Clegg 12. The name was changed to 14 in 1923. It was last offered for sale in 1925. See Rover Clegg.

Announced in October 1924 with a much more powerful engine than its predecessor[2] it would remain available until 1928 though "supplemented" from May 1926 by the 2.4-litre 16/50 with a strengthened transmission on the same chassis.[3] Somewhat unconventional the new 14/45 displayed these distinctive attributes: unusual engine design (spherical combustion chambers), four-wheel brakes, four-speed gearbox[2][4]

Engine

The engine was given spherical combustion chambers for which greater efficiency was claimed because it provided more even burning of the fuel and air mixture. The engine's sparking plugs had been placed in the centre of each combustion chamber and on either side of the plug the overhead valves were mounted at 45 degrees to the head. One overhead camshaft acts directly on the inlet valves and through horizontal pushrods works the exhaust valves on the other side of the engine. The camshaft was driven by a vertical shaft at the rear of the engine. Water circulation was assisted by an impeller.[2] By the time of the following Motor Show the worm drive at the rear of the engine for the camshaft and other accessories had been modified to deal with a noise problem.[5]

Transmission

Engine clutch and gearbox were held as a unit at three points.[4] There was a single plate clutch, its housing cast in one piece with the gearbox, a four-speed gearbox and an enclosed drive shaft taking power to the spiral bevel final drive. The gear lever, adjustable for reach, was positioned by the driver's right hand.[2]

Brakes steering suspension

The worm and sector steering box[4] was fixed to the engine and received lubrication from it. All four wheels had internally expanding brakes. The hand lever operated only the back pair. Unconventional in action it was simplified for the following Motor Show. The front brakes used the Perrot system.[2] The car's springs were all half-elliptical, flat-set and gaitered.[4]

Body

As well as the windscreen there was a rear screen and luggage grid. The hood was supplied with a draught excluder and all-weather side curtains. The front seats could be adjusted.[2]

Road test

The reviewer for "The Times" liked the car though he did comment that the flexible and responsive engine seemed to have "no very marked bite". The engine remained cool throughout the test. The otherwise unusually good suspension allowed too much rocking movement fore and aft. Passenger accommodation back and front was "unusually comfortable" and "wholly quiet". The car "looks well".[4]

This car was a renamed Pilot 12 after the engine was enlarged from 12 to 14 horsepower in mid 1932. See Rover Pilot

Rover 14 P1
1935 Fourteen 6-light saloon P1
Overview
Manufacturer	Rover
Production	1933–1938
Body and chassis
Body style	chassis only four-door “six-light” saloon four-door "four-light" sports saloon Streamline saloon (fastback) Speed Fourteen Streamline coupé Speed Fourteen Hastings coupé sports four-seater * coupé and sports bodies also available with 54 bhp engine as Rover Speed Fourteen[6]
Powertrain
Engine	1577 cc straight 6
Transmission	gear control central and 'remote'; 4-speed with 'quiet' 2nd and 3rd; free-wheel controlled from dashboard (automatic starting); single-dry-plate clutch; open propellor shaft; spiral bevel rear axle
Dimensions
Wheelbase	2,921 mm (115 in)[1]
Length	4,191 mm (165 in) to 4,445 mm (175 in)
Width	1,575 mm (62 in) to 1,588 mm (63 in)
Kerb weight	P1 24 cwt, 2,688 lb (1,219 kg) P1 26 cwt, 2,912 lb (1,321 kg) P2
Chronology
Predecessor	Pilot 14
Successor	Rover P2

Fourteen 6-light saloon
registered April 1938

The Rover Fourteen P1 was announced in early September 1933[6] to replace the interim Pilot 14. It had been seen previously by the public in prototype in the RAC Rally at Hastings as the competition winning Rover Speed Fourteen 4-door coupé.

The B H Thomas six-cylinder ohv engine from the Pilot had a capacity of 1,577 cc. Maximum power output of 48 bhp (39.7 kW) at 4,600 rpm[7] and a top speed of 111 km/h (69 mph) were claimed.[1]

The car had no luggage compartment and the spare wheel and tyre were carried in a metal case positioned vertically above the back bumper with a fold-out luggage rack.

Rover 14 P2
Fourteen 6-light saloon registered September 1939 (postwar car was longer and wider)
Overview
Manufacturer	Rover
Production	1938–1940 1945–1948
Body and chassis
Body style	4-door 6-light saloon[13] 4-door 4-light sports saloon[13] drophead coupé[13]
Powertrain
Engine	1901 cc straight 6
Chronology
Predecessor	Rover Fourteen P1
Successor	Rover Fourteen P3

An "entirely new" car was announced on 14 October 1938 with a more powerful engine, 1901 cc, new coachwork, "easy-clean" wheels and additional refinements including synchromesh on 3rd and top gears (not essential on cars with freewheel), automatic chassis lubrication and anti-roll stabilisers front and back. The track is now 48 inches, tools are now in a rubber-lined tray[14][15]

This model was part of the Rover P2 range, along with Rover 10, Rover 12, Rover 16 and Rover 20 variants.[16]

In 1945 another 2½ inches was added to the wheelbase as well as 2½ inches to the track.[1]

• (republished) Culshaw, David & Horrobin, Peter: The Complete Catalogue of British Cars 1895 - 1975, Veloce Publishing Plc., Dorchester (1997), ISBN 1874105936

Wikimedia Commons has media related to Rover 14.

• images of a 14/45 4-door open tourer
• A 1936 Speed 14 streamline coupe (left), and a 1935 streamline saloon (right)