Runway end identifier lights

Runway end identifier lights (REIL[1]) (ICAO identifies these as Runway Threshold Identification Lights) are installed at many airports to provide rapid and positive identification of the approach end of a particular runway. The system consists of a pair of synchronized flashing lights located laterally on each side of the runway threshold. REILs may be either omnidirectional or unidirectional facing the approach area.[2] They are effective for:[2]

  • Identification of a runway surrounded by a preponderance of other lighting
  • Identification of a runway which lacks contrast with surrounding terrain
  • Identification of a runway during reduced visibility
Runway end identifier lights

The International Civil Aviation Organization (ICAO) recommends that:[3]

  • Runway threshold identification lights should be installed:
    • at the threshold of a non-precision approach runway when additional threshold conspicuity is necessary or where it is not practicable to provide other approach lighting aids; and
    • where a runway threshold is permanently displaced from the runway extremity or temporarily displaced from the normal position and additional threshold conspicuity is necessary.
  • Runway threshold identification lights shall be located symmetrically about the runway centre line, in line with the threshold and approximately 10 meters outside each line of runway edge lights.
  • Runway threshold identification lights should be flashing white lights with a flash frequency between 60 and 120 per minute.
  • The lights shall be visible only in the direction of approach to the runway.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.