Planetary nomenclature

When images are first obtained of the surface of a planet or satellite, a theme for naming features is chosen and a few important features are named, usually by members of the appropriate IAU task group (a commonly accepted planet-naming group). Later, as higher resolution images and maps become available, additional features are named at the request of investigators mapping or describing specific surfaces, features, or geologic formations. Anyone may suggest that a specific name be considered by a task group. If the members of the task group agree that the name is appropriate, it can be retained for use when there is a request from a member of the scientific community for a name of a specific feature. Names that pass review by a task group are submitted to the IAU Working Group for Planetary System Nomenclature (WGPSN). Once approved by the WGPSN, names are considered official and can be used on maps and in publications. They are also listed in the Gazetteer of Planetary Nomenclature.[2]

Names adopted by the IAU must follow various rules and conventions established and amended through the years by the Union. These include:[3]

1. Nomenclature is a tool and the first consideration should be to make it simple, clear, and unambiguous.
2. In general, official names will not be given to features whose longest dimensions are less than 100 meters, although exceptions may be made for smaller features having exceptional scientific interest.
3. The number of names chosen for each body should be kept to a minimum. Features should be named only when they have special scientific interest, and when the naming of such features is useful to the scientific and cartographic communities at large.
4. Duplication of the same surface feature name on two or more bodies, and of the same name for satellites and minor planets, is discouraged. Duplications may be allowed when names are especially appropriate and the chances for confusion are very small.
5. Individual names chosen for each body should be expressed in the language of origin. Transliteration for various alphabets should be given, but there will be no translation from one language to another.
6. Where possible, the themes established in early solar system nomenclature should be used and expanded on.
7. Solar system nomenclature should be international in its choice of names. Recommendations submitted to the IAU national committees will be considered, but final selection of the names is the responsibility of the International Astronomical Union. Where appropriate, the WGPSN strongly supports an equitable selection of names from ethnic groups, countries, and gender on each map; however, a higher percentage of names from the country planning a landing is allowed on landing site maps.
8. No names having political, military or (modern) religious significance may be used, except for names of political figures prior to the 19th century.
9. Commemoration of persons on planetary bodies should not normally be a goal in itself, but may be employed in special circumstances and is reserved for persons of high and enduring international standing. Persons being so honored must have been deceased for at least three years.
10. When more than one spelling of a name is extant, the spelling preferred by the person, or used in an authoritative reference, should be used. Diacritical marks are a necessary part of a name and will be used.
11. Ring and ring-gap nomenclature and names for newly discovered satellites are developed in joint deliberation between WGPSN and IAU Commission 20. Names will not be assigned to satellites until their orbital elements are reasonably well known or definite features have been identified on them.
12. Accessible and authoritative sources, including Internet sources, are required for adopted names. Wikipedia is not sufficient as a source, but may be useful for identifying appropriate sources.

In addition to these general rules, each task group develops additional conventions as it formulates an interesting and meaningful nomenclature for individual planetary bodies.

Names for all planetary features include a descriptor term, with the exception of two feature types. For craters, the descriptor term is implicit. Some features named on Io and Triton do not carry a descriptor term because they are ephemeral.

In general, the naming convention for a feature type remains the same regardless of its size. Exceptions to this rule are valleys and craters on Mars and Venus; naming conventions for these features differ according to size.

One feature classification, regio, was originally used on early maps of the Moon and Mercury (drawn from telescopic observations) to describe vague albedo features. It is now used to delineate a broad geographic region.

Named features on bodies so small that coordinates have not yet been determined are identified on drawings of the body that are included in the IAU Transactions volume of the year when the names were adopted. Satellite rings and gaps in the rings are named for scientists who have studied these features; drawings that show these names are also included in the pertinent Transactions volume. Names for atmospheric features are informal at present; a formal system will be chosen in the future.

The boundaries of many large features (such as terrae, regiones, planitiae and plana) are not topographically or geomorphically distinct; the coordinates of these features are identified from an arbitrarily chosen center point. Boundaries (and thus coordinates) may be determined more accurately from geochemical and geophysical data obtained by future missions.

During active missions, small surface features are often given informal names. These may include landing sites, spacecraft impact sites, and small topographic features, such as craters, hills, and rocks. Such names will not be given official status by the IAU, except as provided for by Rule 2 above. As for the larger objects, official names for any such small features would have to conform to established IAU rules and categories.

• Astronomical naming conventions
• Lists of geological features of the Solar System
• List of adjectivals and demonyms of astronomical bodies
• Naming of moons
• Selenography
• Toponymy, the scientific study of place-names (toponyms), their origins, meanings, use and typology.

• Ronald Greeley & Raymond M. Batson (1990). Planetary Mapping. Cambridge University Press. ISBN 0-521-03373-X.

• Gazetteer of Planetary Nomenclature IAU Working Group for Planetary System Nomenclature (WGPSN)
• 'Planetary Names: How do we come up with them?', Planetary Society weblog article by Rosaly Lopes, IAU WGPSN member
• Members of the WGPSN
• Planetary Maps: Visualization and Nomenclature Cartographica 41/2 2006
• Development of a Local Toponym System at the Mars Desert Research Station Cartographica 42/2 2007
• APTN National News interviews Planetary Cartographer John Koulouris,(Esq.) on I.A.U. officially adopted Planetary Surface Feature Nomenclature attributed to Aboriginal Peoples' Cultures, People and Places
• Planetary Atlas of Venus in the Hellenic (Greek) and English Languages with I.A.U. adopted surface feature nomenclature as of 1984 created by: John A. Koulouris,(Esq.)