SAIC Kavachi engine

The Kavachi engine, commonly known as the TCI-Tech, was developed by SAIC Motor, based on a re-engineering of the Rover K-series engine.[1] It is used in Roewe and MG Motor vehicles.

The 1796cc Kavachi engine is produced in two versions, a naturally aspirated producing 98 kW (131 bhp; 133 PS) at 6,000 rpm and 168 N⋅m (124 lb⋅ft) @ 4,500 rpm, and a turbocharged version producing 118 kW (158 bhp) at 5,500 rpm and 215 N⋅m (159 lb⋅ft) of torque from 2,500 to 4,500 rpm. It is Drive-by-wire.

UK engineering firm Ricardo plc were tasked with remedying the well known faults of the K series by SAIC Motor for its introduction into the Chinese marketplace. With a redesigned head, improved waterways, stiffened block as well as changing the manufacturing process and quality of material, the Kavachi is seen as the pinnacle of K-series development. As of 2015, with more than half a decade in the market, there have been no reported issues of head gasket failure on cars using the Kavachi engine.

A point to note, the Kavachi engine is sometimes referred to and often confused with the N Series engine. The N Series is also a development of the original K Series but was in fact produced by Nanjing Automobile (NAC) a rival company at the time to SAIC. (later merged)

N Series was fitted into the relaunched MG TF in the UK and in the MG3 SW and MG7 in China.

Fixed the well known Head gasket issues associated with the MG Rover K series engine.