Semovente da 75/46

The Semovente da 75/46 was an Italian tank destroyer used during World War II.

Semovente da 75/46
Sturmgeschütz M 43 mit 75/46 (852) (i)
The 75/46 prototype[1]
TypeTank destroyer
Place of originItalian Social Republic
Service history
Used byNazi Germany
WarsWorld War II
Production history
ManufacturerAnsaldo
Produced1944-45
No. built11–13
Specifications
Mass15.7 t[2]
Length7.28 m (23 ft 11 in) overall[1]
Width2.88 m (9 ft 5 in)[1]
Height1.74 m (5 ft 9 in)[2]
Crew3 (commander/gunner, driver, loader/radio operator)

Armourmax 75 mm (3.0 in)[1]
Main
armament
75 mm (3.0 in) L46 gun with 43 rounds[1]
Secondary
armament
8 mm Breda 38 machine gun with 500 rounds[1]
EngineSPA 15TB M-15 diesel V8 water cooled[1]
130 kW (170 bhp)[2]
Suspensionvertical volute spring

Development

After the armistice of Cassibile signed in September 1943, Northern and Central Italy fell under German control. In 1944 the progress of the war led them to order a new Italian armoured vehicle for a tank-fighting role, based on the Semovente da 105/25 self-propelled gun. The result was the Semovente da 75/46, which was named Sturmgeschütz M 43 mit 75/46 (852) (i) by the Germans, following their naming convention.[1]

The 75/46 shared the same "M 43" hull of the Semovente da 105/25.[3] However, the 105 mm L25 howitzer was replaced by a long Cannone da 75/46 C.A. modello 34 – originally conceived as an anti-aircraft gun but also used as an anti-tank gun – which gave a higher muzzle velocity (750 m/s instead of 510) and a far greater effective range, being able to fire a 6.5 kg (14 lb 5 oz) shell up to 13,000 m (43,000 ft) away. This gun could be loaded with HE or armour-piercing rounds; when loaded with the latter, it could penetrate up to 90 mm (3.5 in) of armour from 500 m.[3][4]
The other main difference with its precursor was in the overall increased armour: sloped plates were applied to the casemate and others were added on the sides, above the tracks.[1] Due to these features and despite its origins, the 75/46 is considered a tank destroyer in every respect.[5]

Production

Between 1944 and the end of World War II in Italy, Ansaldo managed to assemble only 11[3][5] or 13[1] vehicles, all deployed exclusively by the Wehrmacht. Their standard camouflage, applied just after assembly, was Saharian Khaki background with reddish-brown and gray-green patches.[3]

References

  1. Pignato, Nicola (1974), in Bellona Military Vehicle Prints, series 36. Model & Allied Publications LTD., p. 13, 18-20
  2. Values for the original Semovente da 105/25, as cited in Pignato (1974). The author does not provide the 75/46 equivalents in the comparison of the two models, so it is possible that the values were the same, or otherwise simply unknown.
  3. Pignato, Nicola (2004). Italian Armored Vehicles of World War Two. Squadron/Signal publications. ISBN 0-89747-475-9., p. 51
  4. Cappellano, Filippo; Battistelli, Pier Paolo (2012). Italian Medium Tanks: 1939-45. New Vanguard 195. Oxford: Osprey Publishing. p. 36. ISBN 9781849087759.
  5. Guglielmi, Daniele (2013). Semoventi M 41 & M 42. Model Centrum PROGRES. ISBN 978-83-60672-03-7., p. 64
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.