Modern Literal Taiwanese

• Bilabial: b, p, ph, m
• Alveolar: t, th, n, l
• Velar: g, k, kh, h
• Palatal: c, ch, s, j
• Dental: z, zh, s, j

• Simple: a, i, u, e, o, ø, m, ng
• Compound: ai, au, ia, iu, iø, iau, ui, oa, oe, øe, oai
• Special High Tone (1st tone of i, u): y, w
• Special Shouting-Out Tone (2nd tone of ai, i, u, e, au): ae, ie, uo, ea, ao
• Front Nasal (indicator only, must be followed by a vowel): v
• Rear Nasal: m, n, ng

The nasals m, n, and ng can be appended to any of the vowels and some of the diphthongs. In addition, m and ng can function as independent syllables by themselves.

The stops h/q, k/g, p/b and t/d can appear as the last letter in a syllable, in which case they are pronounced with no audible release. (The finals h and q stand for a glottal stop of high and low tone, respectively.)

TMSS originally prescribed two special characters: the Greek letter ν and an o crossed by a backslash. These were replaced with the Latin letter v and number 0, respectively. Because mixing numbers into words is problematic for spell checkers, 0 was subsequently replaced by ø.

Not only consonants and vowel sounds, but also tones are represented by letters in the MLT system. Certain letters have no sound of their own and are merely used as tone indicators. Others letters represent vowels or vowel combinations which have certain tones. For example, "f", "r", and "x" are tone indicators only, and have no sound of their own in MLT. "Af" represents the "a" sound with a "high" tone, "ar" represents the same vowel sound but with a "shouting" tone, "ax" is the "a" sound with the low falling tone. A "y" or "w" indicates a high tone "i" and "u", respectively, while certain diphthongs, such as "ie" and "uo", are treated as "shouting" tones. The basic tone is represented by a normal, simple vowel (or voiced consonant—e.g. the nasals, "m" or "ng") without any special spelling modification.

A high tone is derived by raising the pitch of the voice to a level somewhat above the basic tone and is normally represented by adding the tone indicator "f" after a vowel, with the exception of the "i" and "u" sounds in a syllable. A high tone "i" and a high tone "u" are denoted by "y" and "w", respectively.

(The high tone would be near the top of one's normal speaking register. It may possibly be compared to the sort of high intonation used by English speakers when imitating a singer warming up with a high but level "mi, mi, mi, mi, mi".)

A shouting-out (or just "shouting") tone is derived from shouting out a basic tone, and is normally represented by adding a tone indicator "r" after a vowel. When compound vowels are present in the shouting tone, however, sounds which by the normal rule would otherwise be written "air", "ir", "ur", "er", and "aur" are instead spelled "ae", "ie", "uo", "ea", and "ao", respectively. Exceptions occur when this rule overlaps with other rules. For example, the shouting tone of "lin" is written "lirn", not "lien" (interpreted as a compound vowel in basic tone) even though "lie" is the "shouting" counterpart to "li".

(Note that the so-called "shouting" tone is not literally a shout, but refers to the sort of quick, falling tone used, e.g., in shouting out a single-syllable word. It may be understood by English speakers by comparing the neutral tone in the normal pronunciation of the vowel in the name "Bob" with the quick, falling tone used when shouting the name (or saying the name quietly but with urgency), "Bob!" Similarly, saying "No!" achieves the same quick, downward tone in English.)

The low-falling tone is always marked by appending an "x" to the rearmost vowel. (Think of the low, almost guttural tone used in muttering a flat "Huh." or "Hmph." in English.)

The rising tone is denoted according to the following rules:

• Simple vowel: simply repeat the vowel. (E.g., "guu".)
• Compound vowel: repeat the last vowel letter except when it contains an “a”, then just repeat the “a”. (E.g., "zoaa".) In the case of ø, use øo rather than øø.

(Just as an urgent, quick "No!" can provide an example of the "shouting" tone in English, a questioning "No?" may represent the rising tone.)

The low stopping tones are indicated by switching the final stops with the high stopping tones' as follows: h->q, t->d, p->b, k->g.

Examples for the seven tones:

• 1 (High): ty (豬, pig)
• 2 (Shouting-out): bea (馬, horse)
• 3 (Low-falling): pax (豹, leopard)
• 4 (Low stop): aq (鴨, duck)
• 5 (Rising): zoaa (蛇, snake)
• 7 (Basic): chviu (象, elephant)
• 8 (High stop): lok (鹿, deer)

The apostrophe (', typewriter apostrophe) is used to demarcate syllables when there is ambiguity. A hyphen (-) is used to join two or more isolated words to make a new compound word with its own meaning. When a word contains a grave accent (`), all the syllables after this mark are accented in the low tone (low-falling for the long tones, and low-short for short tones).

Tones

Tone name	Yin level 陰平(1)	Yin rising 陰上(2)	Yin departing 陰去(3)	Yin entering 陰入(4)	Yang level 陽平(5)	Yang rising 陽上(6)	Yang departing 陽去(7)	Yang entering 陽入(8)	High rising (9)	Neutral tone (0)
IPA	a˥	a˥˧	a˨˩	ap˩ at˩ ak˩ aʔ˩	a˧˥		a˧	ap˥ at˥ ak˥ aʔ˥	a˥˥	a˨
Pe̍h-ōe-jī	a	á	à	ap at ak ah	â		ā	a̍p a̍t a̍k a̍h		--a
TLPA (and Revised TLPA)	a1	a2	a3	ap4 at4 ak4 ah4	a5	a6	a7	ap8 at8 ak8 ah8	a9	a0
BP	ā	ǎ	à	āp āt āk āh	á		â	áp át ák áh
MLT	af	ar	ax	ab ad ag aq	aa	aar	a	ap at ak ah		~a
DT	a	à	â	āp āt āk āh	ǎ		ā	ap at ak ah	á	å
Taiwanese kana (normal vowels)	アア	アア	アア	アㇷ゚ アッ アㇰ アァ	アア		アア	アㇷ゚ アッ アㇰ アァ
Taiwanese kana (nasal vowels)	アア	アア	アア	アㇷ゚ アッ アㇰ アァ	アア		アア	アㇷ゚ アッ アㇰ アァ
Extended bopomofo	ㄚ	ㄚˋ	ㄚ˪	ㄚㆴ ㄚㆵ ㄚㆶ ㄚㆷ	ㄚˊ		ㄚ˫	ㄚㆴ˙ ㄚㆵ˙ ㄚㆶ˙ ㄚㆷ˙
Tâi-lô	a	á	à	ah	â	ǎ	ā	a̍h	a̋	--ah
Example (traditional Chinese)	公司	報紙	興趣	血壓 警察 中國 牛肉	人員		草地	配合 法律 文學 歇熱	昨昏	入去
Example (simplified Chinese)	公司	报纸	兴趣	血压 警察 中国 牛肉	人员		草地	配合 法律 文学 歇热	昨昏	入去

• Note: The bopomofo extended characters in the zhuyin row require a UTF-8 font capable of displaying Unicode values 31A0–31B7 (ex. Code2000 true type font).