Sony Cyber-shot DSC-F717
The Sony Cybershot DSC-F717 is a bridge digital camera, introduced by Sony in September 2002.
Overview | |
---|---|
Type | Bridge digital camera |
Lens | |
Lens | Fixed, Carl Zeiss Vario-Sonnar, 38–190 mm equiv. (5× zoom) |
Sensor/medium | |
Sensor | 8.80 mm × 6.60 mm CCD |
Maximum resolution | 2,560 × 1,920 (5 million) |
Film speed | 100, 200, 400, 800 |
Storage media | Memory Stick (PRO) |
Focusing | |
Focus modes | Single |
Focus areas | AI Multi-Segment |
Shutter | |
Shutter speed range | 30–1/2000 s |
Continuous shooting | 3 frames @ 2.0 frame/s |
Viewfinder | |
Viewfinder | Electronic with dioptre adjustment, TFT-LCD |
General | |
LCD screen | 1.8" / 123,000 pixels |
Weight | 659 g (including battery) |
Overview
F717 features the same 5.0 megapixel CCD sensor and 38–190 mm equiv. Carl Zeiss Vario-Sonnar lens as its predecessor, the 2001 DSC-F707. Major changes / improvements over the F707 include:
- Analog focus ring can now double as a zoom ring
- Addition of a "P" mode, ISO 800 option, and (with constraints) 1/2000 shutter speed
- Better Noise Reduction Algorithm; NR automatically applies for slower than 1/30 shots
- More natural color rendition (in particular, less "red overshoot")
- Quick Review: The last photo can be reviewed by holding on the shutter button after the photo is taken.
- USB 2.0 for faster file transfer to a PC or a printer
- Supports Memory Stick Pro with capacity of 256MB and up (original Memory Stick has a maximum capacity of 128MB per side)
F717 retained all distinctive features from F707, such as:
- Swivel body design: the lens can be rotated from 36 degrees down to 77 degrees up.
- Hologram AF Assist: projects a laser grid to help acquire AF lock in low-light environments.
- NightShot and NightFraming: In these modes, infrared cut-off filter is temporarily lifted away from CCD, enabling IR detection, which practically allows the camera to "see in the dark". Two infrared LEDs provide short-range active IR illumination in both Night modes. In NightShot mode, Aperture and shutter parameters are forced to "auto", because of potential "see through clothing" concerns.
- LCD/EVF switchable via a hard switch on the back
The F717 was succeeded by DSC-F828 in August 2003.
Defective batches
Some very early production units may experience inaccurate focus with Laser Hologram on. Sony admitted the problem as a minor design flaw, and offered free examination and repair service. Serial numbers of potentially affected units were also announced. According to Sony, it is fixable by correcting a wrong parameter with Sony factory adjustment software. The fix was only performed at Sony service centers.[1]
Around 2004–05, many F717 users reported CCD-related defects. It was later confirmed that many Sony CCDs made from late 2002 to early 2004 suffer from a large-scale manufacturing defect. Interestingly, the aforementioned first-run units seem to be immune to this failure, as they used CCDs built from old production techniques.[2] As a remedy, Sony offered free CCD replacements for affected units till 2007, and in some countries, till 2010. This recall would cover units with expired warranty.
References
- "DSC-F717 Cyber-shot® Digital Still Camera Focus Issue | Sony USA". www.sony.com. Archived from the original on 2019-01-22.
- "Widespread CCD problems in consumer imaging products".