Superior multimineral process

The Superior multimineral process (also known as the McDowell–Wellman process or circular grate process) is an above ground shale oil extraction technology designed for production of shale oil, a type of synthetic crude oil. The process heats oil shale in a sealed horizontal segmented vessel (retort) causing its decomposition into shale oil, oil shale gas and spent residue. The particularities of this process is a recovery of saline minerals from the oil shale, and a doughnut-shape of the retort. The process is suitable for processing of mineral-rich oil shales, such as in the Piceance Basin. It has a relatively high reliability and high oil yield. The technology was developed by the American oil company Superior Oil.

Superior multimineral process
McDowell–Wellman process
Process typeChemical
Industrial sector(s)Chemical industry
oil industry
Feedstockoil shale
Product(s)shale oil
Leading companiesSuperior Oil Company
Developer(s)Superior Oil Company

History

The multimineral process was developed by Superior Oil Company, now part of ExxonMobil, for processing of the Piceance Basin's oil shale.[1] The technology tests were carried out in pilot plants in Cleveland, Ohio.[2][3] In the 1970s, Superior Oil planned a commercial-size demonstration plant in the northern Piceance Basin area with a capacity of 11,500 to 13,000 barrels (1,830 to 2,070 m3) of shale oil per day; however, because of low crude oil price these plans were never implemented.[4][5]

Process

The process was developed to combine the shale oil production with production of sodium bicarbonate, sodium carbonate, and aluminum from nahcolite and dawsonite, occurring in oil shales of the Piceance Basin.[1][3][4] In this process, the nahcolite is recovered from the raw oil shale by crushing it to lumps smaller than 8 inches (200 mm). As a result, most of the nahcolite in the oil shale becomes a fine powder what could screened out. Screened oil shale lumps are further crushed to particles smaller than 3 inches (76 mm).[4] Oil shale particles are further processed in a horizontal segmented doughnut-shaped traveling-grate retort in the direct or indirect heating mode.[4][5][6] The retort was originally designed by Davy McKee Corporation for iron ore pelletizing and it also known as the Dravo retort. In the direct retort, oil shale moves past ducts through which are provided hot inert gas for heating the raw oil shale, air for combustion of carbon residue (char or semi-coke) in the spent oil shale, and cold inert gas for cooling the spent oil shale.[5] The oil pyrolysis takes place in the heating section. To minimize solubility of aluminium compounds in the oil shale, the heat control is a crucial factor. Necessary heat for pyrolysis is generated in the carbon recovery section by combustion of carbon residue (char or semi-coke) remained in the spent oil shale. While blowing inert gases through the spent oil shale, the spent oil shale is cooled and gases are heated to cause pyrolysis. The indirect mode is similar; the difference is that combustion of carbonaceous residue takes place in separate vessel. The last section is for discharging of oil shale ash. Aluminium oxide and sodium carbonate are recovered from calcined dawsonite and calcined nahcolite in the oil shale ash.[4]

Advantages

The traveling-grate retort allows close temperature control, and therefore better control of dawsonite's solubility during the burning stage.[4] During retorting, there is no relative movement of oil shale, which avoids dust creation, and therefore increase the quality of generated products.[5] The oil recovery yields greater than 98% Fischer Assay. The technology has also a relatively high reliability. The sealed system of this process has environmental advantage as it prevents gas and mist leakage.[6]

See also

References
  1. Lee, Sunggyu (1996). Alternative fuels. CRC Press. pp. 340–341. ISBN 978-1-56032-361-7.
  2. MacKetta, John J. (1996). Supercritical fluid technology, theory and application to Technology forecasting. CRC Press. p. 116. ISBN 978-0-8247-2607-2. Retrieved 2009-07-17.
  3. Lee, Sunggyu (1990). Oil Shale Technology. CRC Press. pp. 118–119. ISBN 0-8493-4615-0. Retrieved 2008-05-11.
  4. United States Office of Technology Assessment (June 1980). An Assessment of Oil Shale Technologies (PDF). DIANE Publishing. pp. 148–149. ISBN 978-1-4289-2463-5. NTIS order #PB80-210115. Retrieved 2009-07-17.
  5. The Engineering Societies Commission on Energy, Inc. (March 1981). "Synthetic Fuels Summary. Report No. FE-2468-82" (PDF). United States Department of Energy. pp. 83–84. Archived from the original (PDF) on 2011-07-16. Retrieved 2009-07-17.
  6. "Appendix A: Oil Shale Development Background and Technology Overview". Proposed Oil Shale and Tar Sands Resource Management Plan Amendments to Address Land Use Allocations in Colorado, Utah, and Wyoming and Final Programmatic Environmental Impact Statement (PDF). Bureau of Land Management. September 2008. p. 36. Retrieved 2010-10-29.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.