Technics SL-1200

The SL-1200 was introduced in 1972 as an evolution to the popular SL-1100. It was dubbed "The Middle Class Player System". It was delivered in two different versions: The SL-1200 came with a tonearm section. The SL-120 came without a tonearm section. An SME tonearm was the usual choice for the audiophile.

The SL-1200 Mark 2 was introduced in 1979 as an update to the SL-1200. It represented a culmination of Technics Turntable Innovations. It was dubbed as "The Middle Class Quartz Direct Drive". It soon found its way into discos as well as radio stations for airplay because of its vibration damping ability and resistance to feedback, and eventually it became popular with pioneering hip-hop DJs. Following their established formula, Technics offered different model numbers in Europe: the 1200 (silver) and the 1210 (matte black), which were equipped with switchable dual voltage (110V or 220V) power supplies. Initially, there were only silver models (all named 1200 MK2) in official distribution in Japan and the US (Single voltage of 100V/120V accordingly). However, later the 1200 was available in both silver and matte black finishes (in Japan, the introduction of the MK3 in 1989 marked the first official introduction of a black version). Since 1997, the MK2 had the pitch slide potentiometer changed from 6 pin to 8 pin mounting with part number SFDZ122N11 and later from 20k ohm to 22k ohm, part number SFDZ122N11-1 up until late 1996. After which part number SFDZ122N11-2 was the preferred option which had a +/- 0.5mm quartz travel lock, much shorter than previous versions. This meant that the null point on the centre voltage tap was slightly bigger thus removing the quartz lock conflict. The difference can be seen in the following video demonstration: https://www.youtube.com/watch?v=m_rr01ssq8o

SFDZ122N11-2 was brought back into production in 2018 to which the circuit design and part number reference is now solely owned by Richard Talmage, an engineer in the UK [11]

The earlier MK2 models 1978-1983 or so also have a different construction in the rubber base of the turntable. These turntables were made with a base that was completely rubber, whereas the newer version has 2 separate parts: rubber outside and a bakelite inlay that makes it considerably easier to take apart.

Released in summer of 1979. this model came in both silver and matte black. The matte black version was available for a limited time in the US market in a 2 pack SL-1200MK2PK.[12] Technics improved the motor and shock resistance and changed the rotary pitch control to a slider style. This became the base model and is the oldest whose production continued until 2010. The older version of this model that was sold from 1979 until around 1983 has a large 4-inch-diameter (100 mm) plate where the RCA and ground wires enter the unit, while the newer version has a smaller 2-inch-diameter (51 mm) hole in the rubber where the RCA and ground enter. International versions of the SL-1200MK2 included switches for line voltage and frequency beneath the platter.

Technics SL-1210MK2, black metallic

This model came in satin black metallic finish and is nearly the same in function as the SL-1200MK2, although some of the circuitry inside is updated to use fewer types of pots and resistors.[13] The Technics 1210 series also had a switch to change between voltages on the underside of the platter. It was unavailable from official Panasonic dealers in the United States.

Released in 1989, has a matte black finish like the MK2, gold RCA plugs, and a small gold-foil Technics label on the back. It was destined only for the Japanese market.

Japan only, factory gold RCA cables, black or silver finish. Pitch reset button. Released in 1997.[14]

Released in 1997, a silver finish like the MK2 (beside silver finish, there are copies with "champagneish" color), a detached dust cover (no hinges), a recessed power switch to prevent DJs from accidentally turning the deck off during use, and no self-locking detent ("click") at the zero point of the pitch adjustment slider, allowing more precise control of pitch near that point. It has a reset button that sets the pitch adjustment to 0, regardless of the actual position of the pitch adjustment slider. In addition the M3D series has unique details: the brand and model label is printed in a single line instead of two; and the stroboscopic light is red with a slightly orange tone. This model also introduced a slot near the counterweight allowing for storage of a second headshell. The M'K'3D was designed for Japanese markets While the M3D without the K was European/US.

This model is the same as the SL-1200M3D except with a matte black finish like the MK2.

The SL-1200 Mark 4 was introduced in 1996. It was an update to the SL-1200MK2. It was available only in Japan and priced at around $650. It has a matte black finish. This model is aimed at the hi-end audiophile market rather than DJs. It is the last model made with the detent ("click") in the neutral position (+/- 0%) of the pitch adjustment slider. In addition to the existing 33 RPM and 45 RPM buttons, the MK4 added a 78 RPM button. It is designed to be used with regular removable RCA cables (along with a removable ground/earth cable) rather than having hard wired RCA cables like all other 1200/1210 models. The tonearm was different from those in the previous models as it was made from titanium.

Technics SL-1200 MK5 playing a record

Released on 1 November 2000, this has a silver finish like the MK2, increased range of anti-skate settings from 0–3 grams-force (0–30 mN) to 0–6 grams-force (0–60 mN). The 1200MK5 also has the voltage selector under the platter like the previously improved upon '1210' models. Main difference between '1200MK5' and '1210Mk5' is primarily the colour on these models. However, The 1200 was not only made in silver, It was also produced in Noir (Black) Height adjustment can be set between 0 and 6mm. It carries over many of the improved upon features of the MK3D like the lack of 0 crossing quartz lock for better pitch control & the added spare cartridge holder. Current MK5 models have a removable lid as opposed to the MK2 and MK3 removable hinged lid. Unlike some earlier 1200' models, The 1200MK5 also has a voltage select switch under the platter, Previously only found on '1210' models. The MK5 is the last 1200 model to retain an analog pitch control.

SL-1210MK5 has a black finish [noir] like the MK2, and is 'functionally' exactly the same as the SL-1200MK5. [Not to be confused with M5'G']

Released in 2002,[14] 1200MK5G [Not to be confused with MK5 models] The G model was the first Technics turntable to introduce a 'digitally controlled' pitch adjustment. With previous pitch ranges between + and - %8. The m5G added +-%8 Value With the 'addition' of a +-%16 button. Also added was the use of an LED globe on the target light (Previously incandescent) See 1210m5G for more detailed changes.

Released on 1 November 2002, this has a glossy black finish with silver speckles. It was a special 30th-anniversary edition. It was initially launched in Japan only (together with the MK5) but then became internationally available. It switches between ±8% and ±16% ranges for pitch adjustment, and the pitch control is digital which will be the standard for all 1200 models from this point on. It also features blue target lights and blue pitch-number illumination. The brake strength potentiometer, although still located beneath platter, can now be adjusted, unlike previous models, using a small plastic knob. Minor improvements over Mk2, Mk3, Mk4, & 1200LTD include improved tonearm mounting and oxygen-free copper wire, improved vibration damping in the body, improvements to pitch control accuracy and better LEDs. Available as 120 volt model for the North American market.

• SL-1200MK6-K & SL-1200MK6-S (released in February 2008 in Japan) with minor improvements including improved tonearm mounting and oxygen-free copper wire, improved vibration damping in the body, improvements to the pitch control accuracy and better LEDs. -S model has a silver finish like the MK2.
• SL-1200MK6K1 Released on 12 December 2007 (in Japan) as a special 35th-anniversary Limited edition of 1200 units.[15] It consisted of a standard black MK6 packaged up with a booklet and gold record.

These were limited edition versions, with 24 karat gold plated metal parts including tonearm and buttons. Many "non-official" special models of the SL-1200 and SL-1210 appeared over the years, mainly given away as prizes for turntablism, most notably the DMC World Championship, who awarded the winner a pair of 24K gold plated Technics turntables. Due to the customisation trend that has grown in the DJ community, many local events or competitions gave away custom coloured or finished units.

The SL-1200 Limited Edition was introduced in 1995 commemorating two million units in sales. Only 5,000 units were made. Due to popular demand, an extra 500 units were said to be made at the end of the production run.[14] Like the MK3D, it has a pitch reset button, but differs in that it also has a self-locking detent at the zero position of pitch adjustment. This model has a piano black gloss finish and gold-plated hardware. It was priced at about US$1200.

Released in 2004, another limited edition model, with only 3,000 units manufactured. 500 released in Japan with the rest split between the US and International markets. It is based on the MK5G model, with blue (instead of the regular white) target lights, a piano black gloss finish, and gold-plated hardware. It was "created to commemorate the 3 Million turntables sold by technics in the last 30 years".[16]

A Technics SL-1200G turntable with the platter removed reveals the top of the newly designed coreless direct drive motor assembly. In contrast to older models, the platter has no magnet ring on the backside, but is bolted directly onto the motor assembly instead, using three flathead bolts.

Development of a completely rebuilt SL-1200 from the ground up with the intent to create a new system for Hi-Fi use and to redefine the direct-drive turntable reference.

Announced in January 2016 CES in Las Vegas, released in October 2016, SL-1200 Grand Class, an aluminum bound turntable with a high–damping matte magnesium tonearm, a four–layer turntable cabinet, three-layer platter, complete with a microprocessor and the use of a newly developed coreless twin-rotor direct-drive motor with no iron core with rotary positing sensors to eliminate cogging, as well as providing 78 rpm speed compatibility.

An SL-1200GAE (2016) with an Ortofon pickup instead of the original

Announced in January 2016 CES in Las Vegas, released in April 2016,[17] SL-1200 Grand Class 50th Anniversary Edition - A Limited edition of 1,200 units.[18] Same as above, but high polish tonearm tube finish and different viscous material in the turntable feet. Both the G and GAE had an approximate MSRP price of £3,100 / €3,499 / $4,000.[19]

On 28 May 2020, Technics hosted an online launch event to reveal the SL-1210GAE as an alternative for the cancelled High End Munchen 2020 event at which they initially planned to reveal it.[20] It is their 55th Anniversary Edition turntable - A limited edition of 1,210 units https:(//www.technics.com/us/news/0006.html.). Each unit has a plaque on it with its production number engraved in it. The SL-1210GAE is the black counterpart of the SL-1200GAE and is the same in every aspect except the color and the additional feature to turn off the strobe light. It had an approximate MSRP price of €4,499 [21][22][23]

SL-1200GR model from 2019 (on display, without magnetic cartridge)

Announced in January 2017 CES,[24] the GR model is a stripped-down budget version of the G, cutting the price tag more than half at an approximate MSRP of £1,299 / US$1,700. It differs in body construction that it uses a more traditional cast aluminium design similar to the older decks and a one-piece cast platter which brings an overall weight difference between the G/GAE. The G/GAE and GR both use what are essentially the same 9-pole motor. Whereas the G has twin rotors, the GR has a single rotor, giving it less torque. The GR differs from the G in its use of a feedback generator coil system (as used in the original SL1200) instead of an optical encoder.

This is the same as the SL-1200GR except with a matte black finish.

The MK7 models were launched as the first new Technics standard DJ turntable in approximately nine years.[25] The MK7, along with the Grand Class models, no longer have "QUARTZ" printed on the plinth nor dust cover.

Announced in January 2019 CES, the new model inherits the traditional design of the same series in all black and maintains the same operating ease, reliability and durability, while newly adding a coreless direct drive motor and other sound-enhancing technologies. It also features new DJ play functions and features, such as reverse playback, adjustable starting torque and brake speed, detachable terminals for power cable and phono cables (which was previously only available on the MK4 model), an option to select the strobe light indicator from red to blue (the 33/45 lights, 0-pitch reset light and the X2 pitch range light also change to match the color selected), and a new push-type structure for the white LED stylus illuminator.

This is the same as the black SL-1200MK7, but intended for the European market. A silver coloured SL-1200MK7 was introduced in 2021.[26]

Available from September 2020 globally, the SL-1210MK7R is a limited edition version of the SL-1210MK7 produced in collaboration with the Red Bull BC One international breakdancing competition. The SL-1210MK7R comes in Red Bull livery with red headshell, gold-coloured tone arm and decals.

In honor of its 50th anniversary, Panasonic released the SL-1200M7L, a new limited edition version of the MK7. The M7L is available in seven colors – black, red, blue, white, green, yellow and beige – with each featuring a handful of nice touches. All seven colorways come with an anodized tone arm and slipmat with a gold-colored Technics logo. Each one also comes with an engraved serial number. Panasonic plans to only sell 12,000 units of the SL-1200M7L.

Technics will release a new limited edition SL1200MK7SP turntable in very limited numbers for the fall-winter 2023, in collaboration with streetwear brand, Supreme. The core unit is identical to the 1200MK7 but features a white plinth and accessories such as headshell, buttons, power switch, anti-skate, tonearm weight, tonearm height adjuster and pitch slider knob. It sports a metallic Supreme badge on the unit’s body as well as a Supreme logo on the slipmat. Lastly, it features a Technics logo featured in Supreme's iconic red on the dust cover.

At the 2016 Consumer Electronics Show in Las Vegas, Panasonic announced it would be resuming production with a new line of turntables,[32] beginning with the Limited Edition SL-1200GAE [33]

At the 2019 Consumer Electronics Show, Panasonic confirmed future production of a new turntable respectively the SL-1200 Mk7 in matte black, adding new features, fixing known issues with previous models, and all new lighter construction of aluminum and fiber glass.[34]