Tetraamminecopper(II) sulfate

Tetra amine copper(II) sulphate is the salt with the formula [Cu(NH3)4]SO4·H2O. This dark blue to purple solid is a salt of the metal complex [Cu(NH3)4(H2O)]2+. It is closely related to Schweizer's reagent, which is used for the production of cellulose fibers in the production of rayon.

Tetraamminecopper(II) sulfate
Ball-and-stick model of the Tetramine copper(II) cation
Names
IUPAC name
Tetraamminecopper(II) sulfate monohydrate
Other names
cuprammonium(II) sulfate; cupric sulfate, ammoniated
Identifiers
3D model (JSmol)
ECHA InfoCard 100.155.305
UNII
  • [OH2+][Cu-3]([NH3+])([NH3+])([NH3+])[NH3+].[O-][S+2]([O-])([O-])[O-]
Properties
[Cu(NH3)4]SO4·H2O
Molar mass 245.79 g/mol (monohydrate)
Appearance dark blue-purple solution or crystals
Odor Ammonia
Density 1.81 g/cm3
Boiling point 330 °C (626 °F; 603 K)
18.5 g/100 g (21.5 °C)[1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Infobox references
Tetraamminecopper(II) sulfate
Tetraaminecopper(II) sulphate milled
Tetraamminecopper(II) iodide
Analogous compound with different anion: tetraamminecopper(II) iodide

Synthesis

This compound can be prepared by adding concentrated solution of ammonia to a saturated aqueous solution of copper sulfate pentahydrate followed by precipitation of the product with ethanol or isopropanol.[1]

4 NH3 + CuSO4·5H2O →[Cu(NH3)4]SO4·H2O+ 4 H2O

Chemical reaction and solubility

The deep blue crystalline solid tends to hydrolyse and evolve (release) ammonia upon standing in air.[1] It is fairly soluble in water. The brilliant dark blue-violet color of tetraamminecopper(II) sulfate solution is due to presence of [Cu(NH3)4]2+. Often, the dark blue-violet color is used as a positive test to verify the presence of Cu2+ in a solution.

Structure and properties

The solid state structure of tetraamminecopper(II) sulfate monohydrate confirms that the compound is a salt. The complex cation is [Cu(NH3)4(H2O)]2+, which has a square pyramidal geometry. The Cu-N and Cu-O bond length are about 210 and 233 pm, respectively, as determined by X-ray crystallography.[2] The correct concentrations of ammonia and copper sulfate solution needed to synthesize the complex can be determined by colorimetry. The combination of the correct concentrations will produce the highest absorbance read out on the colorimeter and as a result the formula of the complex can be verified.

Corrosion

The characteristic deep blue colour of the tetraammine complex is found in brass and copper alloys where attack from ammonia has occurred, leading to cracking. The problem was first found in ammunition cartridge cases when they were stored near animal waste, which produced trace amounts of ammonia. This type of corrosion is known as season cracking.

Uses

The closely related Schweizer's reagent is used for the production of cuprammonium rayon.

References

  1. Editor G.Brauer "Tetraamminecopper (II) Sulfate" Handbook of Preparative Inorganic Chemistry, 2nd Ed., Academic Press, 1965, New York. Vol. 2. p. 1021.
  2. B. Morosin (1969). "The Crystal Structures of Copper Tetraammine Complexes. A. Cu(NH3)4SO4.H2O and Cu(NH3)4SeO4". Acta Crystallographica. B25: 19–30. doi:10.1107/S0567740869001725.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.