Textile Engineering College, Chittagong
Textile Engineering College, Chittagong (Bengali: চট্টগ্রাম টেক্সটাইল ইঞ্জিনিয়ারিং কলেজ) is a college in Bangladesh, offering bachelor's degree in textile engineering. It is situated by the side of old Dhaka Trunk road which passes through Zorargonj, Mirsharai, Chittagong. It is one of the seven constituent textile engineering colleges of Bangladesh University of Textiles, which are collectively funded by the Department of Textiles.
চট্টগ্রাম টেক্সটাইল ইঞ্জিনিয়ারিং কলেজ | |
Other name | CTEC |
---|---|
Type | Public, Research |
Established | 1980 |
Accreditation | |
Academic affiliation | Bangladesh University of Textiles |
Endowment | Ministry of Textiles and Jute |
Chairman | Prof. Dr. Shah Alimuzzaman (In Charge) |
Principal | Ali Azam Rokon |
Academic staff | 28 |
Administrative staff | 12 |
Students | 420 |
Undergraduates | 420 |
Address | Zorargonj , , Bangladesh |
Campus | Suburban, 18 acres (7.3 ha) |
Language | English |
Website | ctec |
History
The college was established in 1911 and moved to its current location in 1960. A three-year textile engineering course was set up in 1994 which was superseded by a four-year Bachelor of Science course in textile engineering in the 2006–2007 session. It was declared as a college on 13 January 2006.
The college provides textile education. The Textile Engineering College operates under the administrative control of the Department of Textiles of the Ministry of Textiles and Jute.
It was established in 1911 as a weaving school, which was the result of "Shwodeshi Andolon" during the British regime. It was transferred to the entry point of Mohuri Project Road in 1960. In 1980, the weaving school's courses were upgraded to two-year certificate courses in textile technology; the weaving school was named District Textile Institute.
In 1994 a three-year diploma course was introduced in the institution under the Bangladesh Technical Education Board. The duration of the course was extended to four years in 2001.
The Government of Bangladesh introduced a four-year Bachelor of Science program in textile engineering, affiliated to the University of Chittagong, abolishing the Diploma in Textiles from the 2006–2007 study session. Since the 2012–2013 session, the college is affiliated with Bangladesh University of Textiles.[1]
Academics
CTEC offers a four-year bachelor's degree program in textile engineering. It is one of the seven textile engineering colleges run by Bangladesh University of Textiles.
- Faculty of Fashion Design and Apparel Engineering:
- Department of Apparel Engineering
- Faculty of Textile Chemical Engineering:
- Department of Wet Process Engineering
- Faculty of Textile Engineering:
- Department of Fabric Engineering
- Department of Yarn Engineering
Number of seats
The number of seats for the four-year bachelor's degree in textile engineering programmes is given below:
Serial | Department | Seats |
---|---|---|
1. | Apparel Engineering | 30 |
2. | Fabric Engineering | 30 |
3. | Wet Process Engineering | 30 |
4. | Yarn Engineering | 30 |
Total | 120 |
Admission
Admission into the college is competitive and needs a high academic attainment at the primary and secondary school levels. Selection of the student for admission is made through an admission test.
Almost sixty percent of the total students get stipend on the basis of merit during their academic years.
Facilities
There are two hostels for male students and there is a hostel for female students.
The medical services include a medical center with one full-time doctor and a medical assistant. The students are examined free of cost.
The college library has a collection of technical and non-technical books. Library access is open to teachers, students and staff.
There is a co-ordination teacher for each year who looks after the students' affairs.
Buildings
Practical sheds, workshops and laboratories of the college are:
- Yarn Manufacturing Laboratory: provides practical knowledge regarding the blow room section, carding machine, combing machine, ring frame, roving frame, automatic yarn texturing m/c (Reyter).
- Fabric Manufacturing Laboratory
- Weaving Laboratory: has the facility to weave cotton, synthetic and jute fabrics including tappet, dobby and jacquard loom, hand-operated loom, ordinary power loom, automatic power loom and modern loom with CAD system. Modern looms include air-jet and rapier loom.
- Knitting Laboratory: equipped with weft and warp knitting machinery. Weft knitting machines include circular (single jersey, double jersey, rib, jacquard) flat knitting machine and V-bed machine.
- Wet Processing Laboratory: equipped with sample dyeing, sample printing and washing machine, gas singeing machine, thermosol machine, jigger dyeing machine, hydro extractor machine, screen printing machine, screen preparation unit, squeezer machine, data color machine.
- Garments Manufacturing Laboratory: equipped with cutting, sewing and finishing machinery.
- Fashion and Design Laboratory
- Testing and Quality Control Laboratory: has equipment needed to test the fiber, fabric, color fastness, and garments
- Computer Laboratory
- Physics Laboratory
- Chemistry Laboratory
- Engineering Workshop
- Jute Lab: equipped with OD batch mixer, breaker card, finisher card, drawing (1–4), spinning frame, winding machine for jute and machines needed for jute processing from fiber to sacks.
References
- "Textile Engineering College, Chittagong". ctec.gov.
External links
- Official website
- Textile Engineering College, Chittagong on Facebook
- "টেক্সটাইল ইঞ্জিনিয়ারিং কলেজ, জোরারগঞ্জ, চট্টগ্রাম". ctec.chittagong.gov.bd. Retrieved 2021-09-10.