Thermodynamic solar panel

A thermodynamic solar panel is a type of air source heat pump. Instead of a large fan to take energy from the air, it has a flat plate collector. This means the system gains energy from the sun as well as the ambient air.[1] Thermodynamic water heaters use a compressor to transfer the collected heat from the panel to the hot water system using refrigerant fluid that circulates in a closed cycle.

Renewable Heat Incentive

In the UK, thermodynamic solar panels cannot be used to claim the Renewable Heat Incentive. This is due to the lack of technical standards for the testing and installation. The UK Microgeneration Certification Scheme is working to develop a testing standard, either based on MIS 3001 or MIS 3005 or a brand new scheme document if appropriate. [2]

Performance

Lab testing has been carried out by Das Wärmepumpen-Testzentrum Buchs (WPZ) in Buchs Switzerland on an Energi Eco 200esm/i thermodynamic solar panel system. This showed a Coefficient of performance of 2.8 or 2.9 (depending on tank volume).[3]

In the UK, the first independent test is under-way at Narec Distributed Energy. So far data is available for January to April 2014.[4] As with the Carnot cycle, the achievable efficiency is strongly dependent on the temperatures on both side of the system.

References
  1. Debenham, Cathy (11 January 2013). "Thermodynamic panels: your questions answered". YouGen. Retrieved 11 February 2014.
  2. "Thermodynamic Products". Microgeneration Certification Scheme. 6 November 2012. Retrieved 11 February 2014.
  3. "Test results of domestic hot water heat pumps based on EN 16147:2011" (PDF). WPZ. Retrieved 27 February 2019.
  4. "Thermodynamic panel test". Narec Distributed Energy. 6 February 2014. Retrieved 28 May 2014.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.