ToneScript

• A ToneScript syntax may have at most 120 characters.
• A calling tone may use up to 6 frequency components ${\displaystyle n_{k}}$ where ${\displaystyle 1<=k<=6}$
• A cadence section ${\displaystyle Z_{i}}$ indicates its Duration ${\displaystyle D_{i}}$ followed by up to 6 subsections ${\displaystyle ZZ_{i,j}}$ in parentheses. A subsection consists of an ON duration (* for always on), an OFF duration and the list of frequency components ${\displaystyle f_{i,j}}$ used in that subsection.

${\displaystyle f_{i,j}:=n_{1}[+n_{2}[+n_{3}[+n_{4}[+n_{5}[+n_{6}]]]]]}$

${\displaystyle ZZ_{i,j}:=on_{i,j}/off_{i,j}/f_{i,j}}$

${\displaystyle Z_{i}:=D_{i}([ZZ_{i,1}[,ZZ_{i,2}[,ZZ_{i,3}[,ZZ_{i,4}[,ZZ_{i,5}[,ZZ_{i,6}]]]]])}$

• A FreqScript is a sequence of frequencies ${\displaystyle F_{i}}$ in hertz and their corresponding levels ${\displaystyle L_{i}}$ in dBm

  ${\displaystyle FreqScript:=F_{1}}$@${\displaystyle L_{1}[,F_{2}}$@${\displaystyle L_{2}]}$

• A Tone Script has a frequency specification and one or two cadence sections.

${\displaystyle ToneScript:=FreqScript;Z_{1}[;Z_{2}]}$

• 350@-19,440@-19;10(*/0/1+2)

  Contains 2 frequency components

  Frequency component 1 is 350 Hz at -19 dBm

  Frequency component 2 is 440 Hz at -19 dBm

  There is 1 Cadence Section

  In this section, The duration is 10 seconds and the tone has only 1 subsections

  In the only subsection the tone is always on, off for 0 seconds, and composed of both the Frequency components 1 and 2 (350 Hz and 440 Hz)

• 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)

  Contains 2 frequency components

  Frequency component 1 is 350 Hz at -19 dBm

  Frequency component 2 is 440 Hz at -19 dBm

  There are two Cadence Sections

  In the first Cadence Section, The duration is 2 seconds and the tone has only 1 subsections

  In the only subsection the tone is on for 0.2 seconds, off for 0.2 seconds, and composed of both the Frequency components 1 and 2 (350 Hz and 440 Hz)

  In the second Cadence Section, The duration is 10 seconds and again the tone has only 1 subsections

  In the only subsection the tone is always on, off for 0 seconds, and composed of both the Frequency components 1 and 2 (350 Hz and 440 Hz)

• 349@-21,392@-21,440@-21,466@-21,523@-24,540@-24;2.1(.6/0/3,.2/0/2,.7/0/1,.2/0/2,.2/0/3,.3/0/4);30(*/0/5+6)

  Christmas theme dialtone (seven notes of ′The First Noel′ then continuous dialtone for 30 seconds)

  Contains 6 frequency components

  Frequency components are 349, 392, 440, 466, 523 and 540 Hz (five musical notes) plus a beat frequency tone mix to give a warble dialtone beat thereafter.

  There are two Cadence Sections

  In the first Cadence Section, the total duration is 2.1 seconds and the tone has 6 subsections with timing set for music.

  The tones are turned on and off to give the ′notes′ of the familiar Christmas carol.

  In the second Cadence Section, the duration is 30 seconds. It combines tones 5 and 6 to give the last note and the familiar 17 Hz beat of dialtone.

• 392@-19,440@-19,494@-19,294@-19,457@-19;3.5(.7/0/4,.8/0/1,.6/0/1,.5/0/3,.7/0/2,.2/0/1);30(*/0/2+5)

  New Year theme dialtone (four notes of ′Auld Lang Syne′ then continuous dialtone for 30 seconds)

  Contains 5 frequency components

  Frequency components are 392, 440, 494, 292 and 457 Hz (four musical notes) plus a beat frequency tone mix to give a warble dialtone beat thereafter.

  There are two Cadence Sections

  In the first Cadence Section, the total duration is 3.5 seconds and the tone has 6 subsections with timing set for music.

  The tones are turned on and off to give the ′notes′ of the familiar New Year's Eve tune.

  In the second Cadence Section, the duration is 30 seconds. It combines tones 4 and 5 to give the last note in the familiar 17 Hz beat of dialtone.

(ETSI standard) is indicated where tones are in compliance with European Telecommunications Standards Institute recommendations.

• https://supportforums.cisco.com/thread/2021701