Tower Optical

Tower Optical Company, Inc. is a small, Norwalk, Connecticut-based company which has manufactured a binocular tower viewer used at major tourist sites in the United States and Canada since 1932.[1] The company's large, silver-colored devices are used at Niagara Falls, the Empire State Building and other locations.[2]

Tower Optical Company, Inc.
IndustryTelescopes, optical viewers
Founded1933 in the Norwalk, Connecticut, United States
FounderTowers S. Hamilton
Headquarters
Norwalk
,
Connecticut
Area served
United States, Canada

Only about 35 of the viewers are manufactured each year, but several thousand are maintained by the company. Tower Optical has various arrangements with owners of the sites where the devices are located. Where the viewers are free, they are leased; at other locations, revenue is shared between the company and the site owner. Each machine can hold up to 2,000 quarters.[2] The binocular machine has essentially kept its distinctive, tubby shape since it was first manufactured, a deliberate strategy "to preserve its identity", according to Bonnie Rising, the third-generation owner of the family business.[2] When coin-operated, the machines can be timed for roughly 1.5 to 2.5 minutes.[3]

Operations

One of Tower Optical's coin-operated binoculars in Utah
A Tower Optical viewer on the observation deck of Manhattan's GE Building

A foundry in Pennsylvania manufactures the parts used for Tower's viewers, about 35 of which are assembled each year in its two-story building in East Norwalk. The company maintains several thousand of the devices, sometimes removing some in the fall, rebuilding them and returning them in the spring.[2]

A typical viewer is housed in a chrome-plated, bronze-cast shell mounted on a cast iron yoke and pedestal. The inside of the machine is bronze and stainless steel. The binoculars can be raised 45 degrees up, 22 degrees down and swung entirely left or right by 360 degrees. The device and its pedestal typically stand 63 inches high and weigh 300 pounds.[3]

The company limits its distribution of the machines to the United States and Canada for easier management.[2]

As of 2004, the devices were in use in San Francisco at Vista Point at the Golden Gate Bridge and at Coit Tower. That year, the City of Sausalito, California was considering installing five of the machines on its bay waterfront as a fund-raising move. Former Mayor J. R. Roberts, a member of a citizens committee which suggested the installation, said the machines typically cost a user 50 cents, with the city collecting half of the revenue if it took on the responsibility of collecting the coins, or 30 percent if Tower arranged for collection. Each machine was expected to earn somewhere between $1,200 and $10,000 per year. The price and length of viewing time could be customized, he said. Paul Albritton, then mayor of Sausalito, said, "In some areas, telescopes earn a few hundred dollars a month and in other places a few thousand dollars a month."[4]

History

The company was founded by Towers S. Hamilton in 1933 in his Norwalk machine shop. He bought the shop from its owner-founders, Arthur Casey, Earl Bunnell, and John Hanrahan, soon after Hamilton started machining the parts for the viewers. His son, Towers W. Hamilton, later became the owner. His wife, Gladys (Kip) Hamilton, worked with him in the business for many years and on his death in 1989, she took over the company.[5] She died in 2006, and at some point she passed the business on to her daughter, Bonnie Rising, who still owned the company as of 2010, when she had six employees, including her son, Gregory, and her husband, Douglas, who help run the business. Bonnie Rising said in 2010 that she expected her son to take over the business someday.[2]

Local institutions and organizations have given the company recognition for its "iconic" devices. By 2002, the company had donated one of its viewers to the nearby Norwalk Museum in South Norwalk.[6] In 2008, the business was the subject of a lecture, "An American Icon: Norwalk's Tower Optical Company," given to the Norwalk Historical Society.[7]

In 2004 and 2005, the company worked with an artist as part of a project in which 10 companies teamed up with "in residence" artists "to see how technology, be it vintage or cutting-edge, can inform art in the 21st century", as a New York Times article described it. Artist Michael Oatman accompanied workers making 5 a.m. repair runs to tourist locations and "videotaped people as they fantasized about what they would most like to see with the binoculars", according to the newspaper. An exhibition, titled, Factory Direct: New Haven, about the project took place at Artspace in New Haven.[8] Tower Optical also made a lightweight viewer for Oatman to install temporarily at tourist sites.[9]

By 2010, business had declined because of an ongoing recession, but, in July, Rising said a turnaround seemed to be taking place.[2]

See also

References

  1. Home page, Tower Optical Company website, retrieved August 2, 2010
  2. Juliano, Michael C., "Tower Optical sees turnaround", August 1, 2010, The Advocate of Stamford, Connecticut, retrieved August 2, 2010
  3. Web page titled "Binocular Viewer Specifications" at Tower Optical Company website, retrieved August 2, 2010
  4. Bova, Carla, "Sausalito plan sees revenue in coin-operated telescopes", July 8, 2004, Marin Independent Journal of San Rafael, California, article retrieved August 2, 2010 from NewsBank Inc. website (subscription required)
  5. Obituary, Gladys Hamilton, November 9, 2006, Norwalk Citizen-News, Norwalk, Connecticut, article retrieved August 2, 2010 from NewsBank Inc. website (subscription required)
  6. King, Carol, "Museum Visits Can Help Alleviate the Winter Blahs", January 28, 2010, Westport News of Westport, Connecticut, article retrieved August 2, 2010 from NewsBank Inc. website (subscription required)
  7. Lomuscio, James, "Lecture recalls commotion made by the revolution in Sound", September 15, 2008, The Advocate of Stamford, Connecticut, article retrieved August 2, 2010 from NewsBank Inc. website (subscription required)
  8. Cowan, Alison Leigh, "When A Factory Is a Foundry For Art ", February 9, 2005, New York Times, retrieved August 2, 2010
  9. Genocchio, Benjamin, "REVIEW; A Marriage Of Art and Industry", February 27, 2005, New York Times, retrieved August 2, 2010
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.