1997–98 South Pacific cyclone season

Category 2 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	October 8 – October 12
Peak intensity	100 km/h (65 mph) (10-min); 980 hPa (mbar)

On October 4, a cyclonic circulation became evident within an area of convection, that was located about 500 km (310 mi) to the southeast of Yaren in Nauru.[15][16] Over the next few days the system moved southwards, towards the upper subtropical ridge while outflow gradually developed further.[15][16] During October 8, the system was classified as a tropical depression as the system rapidly developed further, before the JTWC initiated advisories on the depression and designated it as Tropical Cyclone 02P.[10][17][18] The FMS subsequently named the depression Lusi during the next day, as the system had intensified into the earliest tropical cyclone since 1970, while located about 1020 km (635 mi) to the northwest of Port Vila, Vanuatu.[10][16][19] Over the next few days, Lusi moved towards the south-southeast, taking a so-called "gentleman's track" between Vanuatu and Fiji.[9]

During October 10, the JTWC reported that Lusi had peaked with 1-minute sustained wind speeds of 110 km/h (70 mph), while the system was located about 570 km (355 mi) to the northwest of Port Vila, Vanuatu.[16] The FMS subsequently followed suit during the next day and estimated peak 10-minute sustained wind speeds of 100 km/h (65 mph) which made it a category 2 tropical cyclone.[16] After it had peaked in intensity Lusi started to weaken in an area of cooler sea surface temperatures, while vertical wind shear increased because of a mid-level trough and strong north-westerlies.[9][15] During October 12, Lusi degenerated into an extratropical cyclone, before the remnants were last noted to the northeast of New Zealand.[16][10] There was no impact caused by Lusi on any island, however, widespread heavy rainfall and gale-force winds were reported on several Fijian Islands.[18]

Category 3 severe tropical cyclone (Australian scale)
Category 3 tropical cyclone (SSHWS)
Duration	October 27 – November 5
Peak intensity	155 km/h (100 mph) (10-min); 945 hPa (mbar)

On October 27, the FMS started to monitor a weak tropical disturbance that had developed to the north of the Northern Cook Islands.[9] Over the next few days atmospheric convection surrounding the system remained disorganised, as the system moved to the southwest and was affected by strong upper-level north-easterly winds and moderate to strong vertical wind shear.[1][10] Late on October 30, the NPMOC designated the disturbance as Tropical Cyclone 04P, after it had developed into a tropical depression.[10][20][21] During the next day the system started to show a marked improvement in organisation and began rapidly developing, before the FMS named it Martin at 1500 UTC after it had developed into a category 1 tropical cyclone.[9] When it was named, Martin was located about 500 km (310 mi) to the west of Manihiki Atoll in the Northern Cook Islands and had started to re-curve and move towards the south-east during that day.[9][22][23] Early on November 1, the FMS reported that the system had become a category 2 tropical cyclone on the Australian scale, before the NPMOC reported that Martin had become equivalent to a category 1 hurricane on the SSHWS.[22]

During November 2, the system continued to intensify as it moved towards the southeast and became equivalent to a category 2 hurricane on the SSHWS, as it moved towards the French Polynesian Society Islands of Bellingshausen, Mopelia and Scilly.[1][22] During the next day, Martin passed near the Society Islands as it developed an 17 km (10 mi) eye, before the FMS reported at 06:00 UTC that the system had peaked as a category 3 severe tropical cyclone with 10-minute sustained wind speeds of 155 km/h (100 mph).[1][22][24] The NPMOC also reported at around that time that Martin had peaked with 1-minute sustained windspeeds of 185 km/h (115 mph), which made it equivalent to a category 3 hurricane on the SSHWS.[22][24] After peaking in intensity Martin started to weaken, as it interacted with a frontal system and started to accelerate towards the south-southeast.[9][25] During November 4, Martin passed within 250 km (155 mi) of Tahiti as it became a category 2 tropical cyclone and started to transition into an extratropical cyclone.[9][22][26] Later that day, the NPMOC issued their final advisory on Martin as it had become vertically sheared, with its surface center dislocated about 110 km (70 mi) from its upper level center.[27] During November 5, the system weakened below tropical cyclone intensity as it moved into Met Services's area of responsibility, before it was last noted on November 8.[9][22]

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	November 18 – November 19
Peak intensity	110 km/h (70 mph) (10-min); 975 hPa (mbar)

On November 18, the FMS reported that a tropical depression had developed within the South Pacific Convergence Zone, about 100 km (60 mi) to the south-southwest of the Santa Cruz Islands in the Solomon Islands.[9][28] During that day, the depression was steered south-westwards by the subtropical ridge of high pressure and encountered an area of increasing upper-level divergence and favourable sea surface temperatures.[28][29] Later that day at around 09:00 UTC, the JTWC initiated advisories on the system and designated it as Tropical Cyclone 05P, after satellite imagery showed that the depression had a well defined low-level circulation and atmospheric convection had become better organized.[30] This was followed 3 hours later by the FMS who reported that the system had developed into a Category 1 tropical cyclone and named it Nute, while it was located about 835 km (520 mi) to the north-west of Port Vila in Vanuatu.[11] Over the next day, the newly named system continued to intensify and developed an eye feature, before the FMS reported that Nute had peaked as a Category 2 tropical cyclone with 10-minute sustained wind speeds of 110 km/h (70 mph) at around 0600 UTC on November 19.[31][32] Later that day, the JTWC estimated that the system had peaked with 1-minute sustained winds of 130 km/h (80 mph), which made it equivalent to a Category 1 hurricane on the Saffir-Simpson hurricane wind scale.[32][33] At around the same time, the FMS passed the primary warning responsibility for Nute to the BoM, after it had moved into the Australian region, where it dissipated to the west of New Caledonia on November 21, after encountering dry air and increased vertical wind shear.[11]

Category 3 severe tropical cyclone (Australian scale)
Category 2 tropical cyclone (SSHWS)
Duration	November 22 – November 28
Peak intensity	150 km/h (90 mph) (10-min); 950 hPa (mbar)

On November 22, the FMS started to monitor a tropical depression that had developed about 465 km (290 mi) to the northeast of Manihiki Island.[11][34] Over the next two days, the depression gradually developed further.[11][35] At 1200 UTC on November 23, the NPMOC reported that the depression had become equivalent to a tropical storm and assigned it the designation 06P, before 12 hours later the FMS named the system Osea, as it had developed into a category 1 tropical cyclone.[9][35] After developing into a tropical cyclone, Osea started moving towards the southeast.[11][36] During November 26, both agency's reported that the system had reached its peak intensity, with the FMS reporting 10-minute sustained windspeeds of 150 km/h (90 mph), while the NPMOC reported peak 1-minute sustained windspeeds of 165 km/h (105 mph).[34] After it had peaked, Osea started to gradually weaken, before during November 27 the NPMOC issued their final warning on the system as it had become sheared.[37] The FMS monitored Osea for another 24 hours, before the system degenerated into a depression during November 28.[9][34]

While it was active, Osea caused no deaths but was quite destructive to some of the northwestern Society Islands, with over 700 homes destroyed or severely damaged on Maupiti, Bora-Bora, and Raiatea.[1] On Maupiti, an island with a population of 1100, about 95% of the infrastructure was destroyed. The town hall, two schools, and an airfield were destroyed.[38] The town hall was evacuated due to the strong winds. In addition, 77 homes on the island were destroyed.[39] Due to flooding, many highways were blocked.[40] On Bora-Bora, an island which had a population of 4,500 at the time, roughly 30% of the infrastructure was destroyed, including 309 houses.[11] On the north side of Bora Bora, nearly everything was destroyed, including the village of Vaitape.[41] In Vaitape, roads were blocked and telecommunication lines were hampered. Seven people on the island were injured.[42][43] Overall, 700 homes were at least somewhat destroyed by Osea.[44] Throughout French Polynesia, banana trees were knocked down due to the strong winds.[45]

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	December 6 – December 10
Peak intensity	110 km/h (70 mph) (10-min); 975 hPa (mbar)

At the end of November, an equatorial westerly wind burst, occurred about 2000 km (1245 mi) to the south-west of Hawaii. This wind burst led to the development of two tropical cyclones, to the east of the International Dateline on either side of the equator.[1] During December 5, both the FMS and the NPMOC started to monitor the system as a tropical depression, while it was located between the Samoan and Northern Cook Islands.[1][46][47] During that day the system slowly developed and organized further and moved south-eastwards, before early on December 6, the FMS reported that the system had developed into a category 1 tropical cyclone and named it Pam.[9][46] After it was named the system continued to slowly drift towards the south-southeast, before it started to move quicker later that day as it passed near the Cook Island of Suwarrow.[46] As the system passed near Suwarrow, the NPMOC reported that Pam had reached its peak intensity with 1-minute sustained wind speeds of 120 km/h (75 mph), which made it equivalent to a category 1 hurricane on the SSHWS.[48]

Over the next couple of days the system moved southwards before the FMS reported during December 8, that Pam had peaked as a category 3 severe tropical cyclone with 10-minute sustained wind-speeds of 120 km/h (75 mph).[46][49] However, during the systems post analysis, the FMS reduced these winds slightly to 110 km/h (70 mph) which made Pam a category 2 tropical cyclone, rather than a category 3 severe tropical cyclone on the Australian scale.[48][49] During December 8, the system passed about 140 km (85 mi) to the east of Palmerston Island, before it passed about 75 km (45 mi) to the southwest of Rarotonga early the next day.[46] During December 9, Pam started to rapidly weaken as it transitioned into an extra-tropical cyclone, while the FMS reported during the next day that the system had degenerated into depression.[46][50] Over the next few days the system continued to move southeastwards, before it was last noted during December 14, while located to the west of Chile.[48]

Category 5 severe tropical cyclone (Australian scale)
Category 5 tropical cyclone (SSHWS)
Duration	December 20 – January 9
Peak intensity	230 km/h (145 mph) (10-min); 900 hPa (mbar)

During December 20, the FMS started to monitor a weak tropical disturbance, that was located about 915 km (570 mi) to the northwest of Pago-Pago in American Samoa.[51][52] Over the next two weeks the system gradually moved towards the west-southwest, without developing into a tropical cyclone.[51] During January 3, the JTWC initiated warnings on the system and designated it as Tropical Cyclone 11P.[53] Later that day the FMS named the system Susan as the system had become a category 1 tropical cyclone, while it was located near the Fiji dependency of Rotuma.[54] During that day the system continued to rapidly develop with the FMS reporting early on January 4, that Susan had become a category 3 severe tropical cyclone, with 10-minute sustained windspeeds of 120 km/h (75 mph).[52] Later that day the JTWC reported that Susan had become equivalent to a category 1 hurricane on the Saffir-Simpson Hurricane Scale, as atmospheric convection surrounding the system organized further and developed an eye feature.[52][55]

Susan subsequently moved towards the southwest as the subtropical ridge of high pressure weakened. Early on January 5, the FMS reported that Susan had peaked as a category 5 severe tropical cyclone with 10-minute sustained wind speeds of 145 mph (230 km/h), while the JTWC reported that Susan had peaked with 1-minute wind speeds of 160 mph (260 km/h) equivalent to a low-end category five hurricane on the SSHS.[52] As the system reached its peak intensity, Susan was moving towards the southwest and as a result, it "posed a severe threat to Vanuatu," however during that afternoon, Susan recurved towards the southeast "just in time to spare Vanuatu, a direct hit."[9] After turning away from Vanuatu, Susan accelerated towards the southeast while remaining near or at its peak intensities, before starting to weaken significantly during January 7.[52] The FMS then reported early the next day, that Susan had weakened into a category 4 severe tropical cyclone while it was located about 435 km (270 mi), to the southeast of Nadi, Fiji, which was close enough for the system to produce gale-force winds in several southern and western Fijian Islands.[1][52] Later that day, Susan started to interact with Ron before by 0000 UTC on January 9, Susan had completely absorbed Ron.[9] The final advisories on the combined system, were then released later that day as the system lost its tropical characteristics and started to undergo an extratropical transition.[9][56] The remnants of the combined systems were then monitored for another day until they were last noted at 1200 UTC on January 10, bringing an unseasonable cold snap to New Zealand.[52][57]

Total damage from Susan was minor.[51] High seas in accordance with Susan inundated the village of Talaulia on Kadavu, Fiji. There was also some destroyed waterfront buildings, roads, jetties and bridges on Kadavu. In Beqa Island, only high seas and swells were experienced. In the town of Lautoka, on Viti Levu, roofs were blown off shops. This damage was possibly caused by a tornado that formed from one of the outer rain bands. One death was reported in accordance with Susan. This death was on Ambrym Island in Vanuatu, where a woman was killed by a falling coconut palm tree.[51]

Category 3 severe tropical cyclone (Australian scale)
Category 2 tropical cyclone (SSHWS)
Duration	January 7 – January 11
Peak intensity	150 km/h (90 mph) (10-min); 955 hPa (mbar)

During January 7, Cyclone Katrina moved into the basin as a Category 2 tropical cyclone, while it was located about 90 km (55 mi) to the south of the island of Rennel, in the Solomon Islands.[58][51] The system subsequently moved south-eastwards and intensified further, before it became a Category 3 Severe Tropical Cyclone and posed a threat to Vanuatu during the next day. It caused one death in Vanuatu, when a man drowned after being swept away by large swells and rough seas while fishing.[59] The system then meandered within the Coral Sea between the Queensland coast and Vanuatu for the next three weeks, before degenerating into a remnant low near Far North Queensland on 25 January. After its decay, the remnants of Katrina moved westward over Cape York Peninsula and the Gulf of Carpentaria, before regenerating into Cyclone Victor on February 8, after which the system moved through the Northern Territory and into the Indian Ocean, over the course of the next week. Upon reaching the Indian Ocean on 16 February, the system was named "Cindy" by Mauritius, before eventually dissipating on 19 February.

Cyclone Katrina impacted parts of Queensland, Vanuatu, and the Solomon Islands, killing two people and causing $8.66 million (1998 USD) in damages.[9]

Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	January 25 – January 27
Peak intensity	75 km/h (45 mph) (10-min); 990 hPa (mbar)

On January 25, both the FMS and the NPMOC reported that Tropical Depression 16P, had developed about 360 km (225 mi) to the northwest of Apia, Samoa.[9][21][60] During that day, as the depression moved towards the southeast it gradually intensified further before at 2100 UTC, the FMS reported that the depression had intensified into a category one tropical cyclone, and named it as Tui, while it was located about 80 km (50 mi) to the northwest of Apia.[9] After it was named, Tui passed over the Samoan Islands of Upolu and Savai'i, before at 0600 UTC, both the FMS and the NPMOC reported that Tui had peaked with 10 and 1 minute sustained windspeeds of 75 km/h (45 mph).[60] After it had crossed Samoa, the system remained near stationary, just to the south of Samoa, before early on January 27 both the NPMOC and the FMS, reported that Tui had weakened into a depression and issued their final advisories.[9][51][60] After Tui was downgraded to a depression, a weak circulation remained in the vicinity of the Samoan islands for several days, before it possibly redeveloped into Tropical Cyclone Wes.[1][9] Ahead of Tui affecting the Samoan islands, Polynesian Airlines and Samoa Air cancelled all of their flights to the islands.[61] Large crop losses and some infrastructure damage were reported in American Samoa and Western Samoa after gale-force wind gusts, heavy rain and rough seas brought down power lines, trees and other debris.[62][63] On the Western Samoan island of Savai'i, a young boy was killed when he stepped into an electrified puddle of water.[9]

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	January 29 – February 2
Peak intensity	110 km/h (70 mph) (10-min); 975 hPa (mbar)

Just after Tropical Cyclone Tui had weakened into a depression near the Samoan Islands, a new tropical depression developed to the northeast of Tahiti in French Polynesia during January 29.[1] Over the next day the system subsequently moved south-eastwards and gradually developed further, before it was declared to be a Category 1 tropical cyclone and named Ursula by the FMS.[51] Ursula subsequently gradually intensified and accelerated towards the south-east, as it got caught up in a westerly flow and passed through French Polynesia's Tuamotu Islands.[64] During February 1, the system peaked as a Category 2 tropical cyclone with 10-minute wind speeds of 110 km/h (70 mph), before the NPMOC initiated advisories and designated Ursula as Tropical Cyclone 17P, with peak 1-minute wind speeds of 120 km/h (75 mph).[51][64] Over the next day the system transitioned into an extratropical cyclone, before the remnants were last noted on February 5, while they were located around 4350 km (2705 mi) to the southwest of Lima, Peru.[1][64] In association with Tropical Cyclone Veli, Ursula brought significant waves which caused minor damages to three Tuamotuan islands of Mataiva, Rangiroa, Makatea.[65] Mataiva was the worst hit island with 39 homes damaged, while roads and bridges were washed away.[65] On Makatea island five houses were damaged while operations at Rangiroa's airstrip were disrupted, after coral and sand washed up onshore.[65]

Category 2 tropical cyclone (Australian scale)
Category 1 tropical cyclone (SSHWS)
Duration	January 30 – February 3
Peak intensity	100 km/h (65 mph) (10-min); 980 hPa (mbar)

During January 30, a tropical depression developed about 650 km (405 mi) to the northeast of Apia in American Samoa.[66] Over the next couple of days the system moved eastwards while gradually developing further, with the NPMOC issuing a tropical cyclone formation alert on the system early on February 1.[66][67] Later that day the FMS named the system Veli as it had intensified into a category 1 tropical cyclone, while it came under the influence of a mid level trough of low pressure and started to move towards the southeast.[67] Later that day the NPMOC started to issue warnings on the system and designated it as Tropical Cyclone 18P, after it had continued to organize and convection surrounding the system had increased.[67] During that day Veli continued to move towards the southeast while gradually intensifying, before early the next day the NPMOC reported that the system had peaked with 1-minute sustained wind speeds of 140 km/h (85 mph).[66] Veli peaked as a category 2 tropical cyclone early on February 2, with 10-minute sustained wind speeds of 100 km/h (65 mph).[66] Over the next day, the cyclone moved through the Tuamotu group of islands, as it began to experience significant vertical windshear and weakened into a depression.[68] The system was subsequently monitored until it was last noted during February 4, about 1,500 km (930 mi) to the northwest of Adamstown on the Pitcairn Islands.[66] In association with Tropical Cyclone Ursula, Veli brought significant waves to French Polynesia's Tuamotu province and caused minor damages on the islands of Mataiva, Rangiroa, Makatea.[65] Mataiva was the worst hit island with roads and bridges washed away, and 39 homes damaged.[65] On Makatea island five houses were damaged while operations at Rangiroa's airstrip were disrupted after coral and sand washed up onshore.[65]

Category 2 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	January 31 – February 5
Peak intensity	95 km/h (60 mph) (10-min); 985 hPa (mbar)

On January 31, the FMS reported that a tropical depression had developed within the South Pacific Convergence Zone, about 230 km (145 mi) to the northwest of the American Samoan island of Apia.[13][69] During that day the depression moved slowly eastwards and intensified further, before it was named Wes by the FMS, after it had developed into a Category 1 tropical cyclone during February 1.[13] The NPMOC subsequently designated it as Tropical Cyclone 19P and initiated advisories later that day, with peak 1-minute sustained wind speeds of 95 km/h (60 mph).[13][70] The system subsequently continued to move eastwards and passed about 95 km (60 mi) to the south of the Cook Island: Nassau.[1][13] During February 3, the FMS reported that the system had peaked, with 10-minute sustained wind speeds of 85 km/h (50 mph) which made it a category 2 tropical cyclone on the Australian scale.[71] Later that day the system subsequently started to rapidly weaken as it moved into an area of higher vertical wind shear and interacted with the westerlies.[72][73] The system was subsequently last noted during February 5, while located about 400 km (250 mi) to the east of Papeete, on the island of Tahiti, French Polynesia.[13][71] The system did not directly affect any inhabited islands, while there was no damage reported on Suwarrow from the system.[1] However, 10 people were killed on the French Polynesian island of Tahaa, after two days of heavy rain associated with Wes caused a landslide during February 6.[74][75]

Category 3 severe tropical cyclone (Australian scale)
Category 2 tropical cyclone (SSHWS)
Duration	March 18 – March 25
Peak intensity	130 km/h (80 mph) (10-min); 965 hPa (mbar)

The system that was to become Yali was first noted as a tropical disturbance, to the northeast of Vanuatu during March 17.[76][77] During that day atmospheric convection over the disturbance's low level circulation center became better defined, before the JTWC initiated advisories and designated the system as Tropical Cyclone 29P, while the system was located about 650 km (405 mi) to the north-northwest of Port Vila.[9][78] Over the next day the system moved towards the west-southwest between Vanuatu and the Solomon Islands under the influence of the subtropical ridge of high pressure to the south of the system.[79] The FMS subsequently reported late on March 19, that the system had developed into a category 1 tropical cyclone and named it Yali.[9] After it was named Yali re-curved and started moving towards the south-southeast, as the monsoonal flow to the north of the system strengthened.[9][78]

Category 3 severe tropical cyclone (Australian scale)
Category 3 tropical cyclone (SSHWS)
Duration	March 29 – April 5
Peak intensity	150 km/h (90 mph) (10-min); 955 hPa (mbar)

During March 29, the JTWC issued a Tropical Cyclone Formation Alert, on a tropical disturbance that they had been monitoring for around a day to the northwest of Fiji.[80][81] At this stage, atmospheric convection had started to persist over the systems low level circulation center, while an upper-level anticyclone had developed over the disturbance.[81] During that day, the system was steered westwards towards Vanuatu, within an area of warm sea surface temperatures and weakening vertical windshear, by an upper-level ridge of high pressure located to the south of the system.[82] The Fiji Meteorological Service subsequently classified the disturbance as a tropical depression, while the JTWC designated it as Tropical Cyclone 31P during March 30.[82][83] The system subsequently continued to develop during the next day and was named Zuman by the FMS after it had developed into a Category 1 tropical cyclone on the Australian tropical cyclone intensity scale.[9]

Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	April 17 – April 26
Peak intensity	75 km/h (45 mph) (10-min); 992 hPa (mbar)

On April 17, the FMS started to monitor a tropical disturbance, that had developed to the east of the Northern Cook Islands.[9][84] Over the next few days the system moved erratically, before it developed into a Category 1 tropical cyclone and was named Alan by the FMS during April 21.[9] When it was named the system was located about 300 km (185 mi) to the east-southeast of Manihiki and had started to move westwards.[1] During April 22, the FMS estimated that Alan had reached its peak intensity with 10-minute sustained wind speeds of 75 km/h (45 mph), as the system started to pose several forecasting challenges as it was difficult to locate and estimate how intense the system was.[1][85] Later that day the NPMOC started to issue warnings on Alan and estimated peak 1-minute sustained wind speeds of 85 km/h (50 mph).[86][87] During April 23, the system appeared to become sheared with the low level circulation centre displaced about 20 km (10 mi) from the nearest atmospheric convection.[1][88] As a result, the FMS reported that Alan had weakened into a depression, while the NPMOC issued their final advisory on the system.[9][84][88] Over the next day as a mid level trough of low pressure that had been shearing the system moved faster than expected the depression became better organized.[36][84]

As a result, the NPMOC initiated advisories on the system again during April 24, while the FMS reported that Alan had re-intensified into a category 1 tropical cyclone later that day.[85][36] The system was now located about 555 km (345 mi) to the west-northwest of the French Polynesian island of Tahiti, and was now moving towards the south-southeast under the influence of an upper level anticyclone located to the east of Alan.[36][84] Early on April 25, Alan passed near too or over the French Polynesian Society Islands of Maupiti, Bora-Bora, and Raiatea.[84] During April 25, strong wind shear pulled the system apart, with visible imagery showing that the system had a fully exposed low level circulation.[9] As a result, the FMS reported that the system had weakened into a depression later that day, while it was located about 185 km (115 mi) to the west-northwest of Tahiti.[9][84] The NPMOC subsequently reissued their final advisory early the next day, as the system drifted towards the south-southeast while located to the west of Tahiti.[84][89] The system affected French Polynesia with high winds and torrential rain, which caused several landslides within the Society Islands.[84][90] The landslides caused two bridges to collapse and along with fallen trees blocked roads.[91] Overall ten people died as a result of the system while thirty others were injured, with the majority of the casualties occurring due to landslides.[1][92] On the islands of Ra'iātea, Tahaa and Huahine several churches, schools and clinics were damaged while water and electricity supplies were cut off.[1][91] Within the islands around 750 houses were destroyed with 430 and 150 of these occurring on Huahine and Ra'iātea respectively.[91]

Category 1 tropical cyclone (Australian scale)
Tropical storm (SSHWS)
Duration	April 28 – May 3
Peak intensity	85 km/h (50 mph) (10-min); 987 hPa (mbar)

During April 27, a tropical disturbance developed within the South Pacific Convergence Zone, near the French Polynesian atolls of Takaroa, Hao and Puka-Puka.[93] The system subsequently moved eastwards over the next couple of days and gradually developed further with automatic weather stations reporting strong winds and significant pressure drops.[93][9] The depression was subsequently named Bart by the FMS during April 29, after it had developed into a category 1 tropical cyclone on the Australian scale near the island of Hao.[84][94] The FMS reported during the next day that Bart had reached its peak 10-minute sustained windspeeds of 85 km/h (50 mph), as the system slowed down due to a blocking ridge of high pressure strengthening.[9][95]

The NPMOC subsequently initiated advisories on Bart and designated it as Tropical Cyclone 37P, while it was at its peak 1-minute sustained windspeeds of 65 km/h (40 mph).[94][95] However, by this time Bart had started to weaken, before on May 1, satellite imagery showed that the systems, low level centre had become exposed as the main area of convection had become sheared.[9] Despite gale-force wind speeds occurring in Bart's southern semicircle, the system weakened into a tropical depression during May 1, before it dissipated to the north of Pitcairn Island on May 3.[84][96] Ten deaths were associated with Bart after waves from the system capsized a boat, while any damage within French Polynesia if any was minimal.[9][93][97]

On October 24, the United States Armed Forces started to monitor an area of disturbed weather, that was located about 800 km (495 mi) to the north of Nadi, Fiji.[98] Over the next couple of days the system moved towards the southwest before early on October 26, as convection surrounding the system organized further, the FMS reported that the system had developed into a tropical depression, while the JTWC issued a tropical cyclone formation alert on it.[10][99] Later that day the JTWC initiated advisories on the depression designating it as Tropical Cyclone 03P, while it was at its peak 1-minute sustained windspeeds of 65 km/h (40 mph).[98][99] Over the next couple of days, a trough of low pressure approached the system and caused the depression to move south-eastwards, before the system dissipated to the north west of Fiji during October 28.[10] On February 11, a tropical depression developed about 185 km (115 mi) to the northwest of the Northern Cook Island: Suwarrow Atoll.[13] Over the next couple of days the depression moved westwards slowly before the centre was relocated late on February 13 to a position about 185 km (115 mi) to the south-southeast of Nassau Island.[13] Over the next few days the depression remained in the same general area before the final advisory was issued on February 15.[13] On February 28, the FMS reported that two tropical depressions had developed within the basin.[13] The first depression developed about 555 km (345 mi) to the northwest the French Polynesian island of Tahiti, before the final warning was issued during the next day after no development had occurred.[13] The second depression developed about 500 km (310 mi) to the southeast of Honiara on the Solomon island of Guadalcanal, over the next couple of days the depression drifted towards the southeast, before the final warning was issued on March 2.[78]