Keeper-class cutter

The Keeper class of coastal buoy tenders consists of fourteen ships built for and operated by the United States Coast Guard. The ships were launched between 1995 and 1999 and all remain in active service. Their primary mission is to maintain thousands of aids to navigation, both buoys and land-based. Their secondary missions include marine environmental protection, search and rescue, law enforcement, and light ice-breaking.

USCGC Henry Blake, the 13th Keeper-class ship launched
Class overview
NameKeeper class
BuildersMarinette Marine Corporation
OperatorsUnited States Coast Guard
Preceded by
  • White class coastal buoy tender
  • Red class coastal buoy tender
Built1995-1999
Completed14
General characteristics
TypeCoastal buoy tender
Displacement850 long tons (864 t) full load
Length175 ft (53 m)
Beam36 ft (11 m)
Draft8 ft (2.4 m)
Installed power2,000 hp (1,500 kW) sustained
Propulsion2 × Caterpillar 3508 DITA Diesel engines; bow thruster, 500 hp (373 kW)
Speed12 knots (22 km/h; 14 mph)
Range2,000 nm at 10 knots

The Keeper-class ships play a specific role in the Coast Guard's buoy tender fleet. They are primarily deployed to coastal areas such as New York Harbor, Chesapeake Bay, and Puget Sound, while the seagoing tenders of the Juniper class handle more off-shore areas, and inland tenders are assigned to the nation's large river systems.

Origins and procurement

In 1991, the average age of the twelve Coast Guard coastal buoy tenders approached 40 years, and the oldest was 52 years old. Maintenance costs on these vessels was growing quickly, and reliability was decreasing. One White-class ship underwent emergency dry-docking to replace hull plates that had nearly rusted through.[1] The obselescence of the coastal buoy tender fleet came as no surprise, since some had been built during World War II, but it took several years for the Coast Guard, its parent agency at the time, the Department of Transportation, Congress, and private shipyards to deliver a solution.

The coastal buoy tender replacement project originated in the Operations Directorate of Coast Guard Headquarters. The sponsor requirements documents generated there formed the basis for the work done by the Acquisitions Directorate.[2] At this point, existing Federal Government regulations, notably Office of Management and Budget Circular A-109 dealing with major systems acquisition, specified much of the contracting process.[3]

The project was reviewed by the Transportation Systems Acquisition and Review Council and approved on 25 March 1992. Congress enacted $23 million for the first stage of acquisition in the FY 1993 budget.[4] On 1 July 1992 a request for proposals was issued to the ship-building industry. On 12 March 1993 the technical and cost evaluations of the proposals were completed. On 17 May 1993 final contract negotiations were completed. On 1 June 1993 the Commandant of the Coast Guard issued a document titled "WLM(R) Circular of Requirements", specifying major aspects of the ships' design.[5] On 22 June 1993, a contract was awarded to Marinette Marine Corporation to build the ships.[6][7]

The contract was a firm order for detailed design and the production of the lead vessel in the class, USCGC Ida Lewis, at a fixed cost of $22 million plus various performance incentives, with options for thirteen more ships, spare parts, and training. If all options in the contract were exercised by the Coast Guard, the total value of the deal was $291 million.[8][9] The Coast Guard exercised options for three additional ships on 7 February 1996,[10] six more ships in February 1997,[11] and the final four in September of 1997.[12]

At the time of the contract award, the Coast Guard announced its intentions to replace the eleven White-class and Red-class cutters still in service with the fourteen keeper-class ships. This saved maintenance expenses on the aging ships, and also significantly reduced personnel requirements through the introduction of advanced technology.[7][13] While the Keeper class launched with a crew of 18, the Red and White class buoy tenders they replaced had crews of 32 and 24, respectively.[14]

As the Coast Guard planned to replace its coastal buoy tender fleet, it also needed to replace its seagoing buoy tenders. This fleet also consisted of World War II ships that had served beyond their original design life. Thus, the history of the Keeper class is entwined with the seagoing Juniper class in a number of ways. Since the Coast Guard was replacing almost all of its saltwater buoy tender fleet, it considered the mix between seagoing and coastal tenders. This resulted in a buoy tender fleet with more of the smaller, cheaper Keeper-class ships, and fewer of the more expensive seagoing ships.[13] Since both classes were designed in the same time period, they adopted similar technical solutions, such as Z-drive propulsion. All ships of both classes were built by Marinette Marine, and the construction overlapped. The Coast Guard placed a 60-person Project Resident Office on site at Marinette's shipyard to monitor and facilitate these two concurrent construction programs.[15][16]

Construction and characteristics

All fourteen ships of the Keeper class were built at Marinette Marine's shipyard in Marinette, Wisconsin. Their hulls were built of welded steel plates. The ships are 175 feet (53 m) long, with a beam of 36 feet (11 m), and a full-load draft of 8 feet (2.4 m).[17] They displace 850 long tons fully loaded.[18] Their gross register tonnage is 904, and their net register tonnage is 271.[19] The top of the mast is 58.75 feet (17.91 m) above the waterline.[20]

Rather than building the ships from the keel up as a single unit, Marinette Marine used a modular fabrication approach. Eight large modules, or "hull blocks" were built separately and then welded together.[17]

Z-drives on a Keeper-class ship

The ships have two Caterpillar 3508 DITA (direct-injection, turbocharged, aftercooled) 8-cylinder Diesel engines which produce 1000 horsepower each. These drive two Ulstein Z-drives. Keeper-class ships were the first Coast Guard cutters equipped with Z-drives, which markedly improved their maneuverability.[10] The Z-drives have four-bladed propellers which are 57.1 inches (145 cm) in diameter[20] and are equipped with Kort nozzles. They can be operated in "tiller mode" where the Z-drives turn in the same direction to steer the ship, or in "Z-conn mode" where the two Z-drives can turn in different directions to achieve specific maneuvering objectives. An implication of the Z-drives is that there is no reverse gear or rudder aboard Keeper-class ships. In order to back a ship, the Z-drives are turned 180 degrees which drives a ship stern-first even though the propellers are spinning in the same direction as they do when the ship is moving forward.[21] Their maximum speed is 12 knots.[10] Their tanks can hold 16,385 gallons of diesel fuel[20] which gives them an unrefueled range of 2,000 nautical miles at 10 knots.[22]

The ships have a 500 horsepower bow thruster. The Z-drives and bow thruster can be linked in a Dynamic Positioning System. This gives Keeper-class vessels the ability to hold position in the water even in heavy currents, winds, and swells. This advanced capability is useful in bringing buoys aboard that can weigh more than 16,000 lbs.[18]

Electrical power aboard is provided by three Caterpillar 3406 DITA generators which produce 285 Kw each.[18] Each ship also has a 210 Kw emergency generator, which is a Caterpillar 3406 DIT.[20]

The buoy deck has 1,335 square feet (124.0 m2) of working area. A crane with a boom 42 feet (13 m) long lifts buoys and their mooring anchors onto the deck. The crane can lift up to 20,000 pounds (9,100 kg).[18]

The ships' fresh water tanks can hold 7,339 gallons.[20] They also have three ballast tanks that can be filled to maintain their trim, and tanks for oily waste water, sewage, gray water, new lubrication oil, and waste oil.[20]

Accommodations were designed for mixed gender crews from the start. Crew size and composition has varied over the years. When Ida Lewis, the lead ship of the class was commissioned in 1997, she had a crew of 18, commanded by a Chief Warrant Officer.[2] By 2000 the crew had been increased to 20 personnel.[23] Currently, the crew is 2 officers and 22 enlisted personnel.[24]

USCGC Marcus Hanna breaking ice near Boston

Keeper-class hulls have a strengthened "ice belt" along the waterline so that they can work on aids to navigation in ice-infested waters. Not only is the hull plating in the ice belt thicker than the rest of the hull, but framing members are closer together in areas that experience greater loads when working in ice. Higher grades of steel were used for hull plating in the ice belt to prevent cracking in cold temperatures. Keeper-class bows are sloped so that rather than smashing into ice, they ride up over it and break it with the weight of the ship. The ships are capable of breaking flat, 9-inch thick ice at 3 knots.[21]

Each ship carries a cutter boat on davits. They were originally equipped with CB-M boats which were replaced in the mid-2010s with CB-ATON-M boats. These were built by Metal Shark Aluminum Boats and were estimated to cost $210,000 each.[25] The boats are 18 feet (5.5 m) long and are equipped with a Mercury Marine inboard/outboard diesel engine.[26]

All 14 Keeper-class cutters are named after distinguished American lighthouse keepers.

In-service vessel sustainment

Keeper-class ships were designed to serve for thirty years. In order to reach that goal, the Coast Guard has awarded class-wide contracts for a number of major maintenance items:

  • In 2023, Adrick Marine Group won a $5 million contract to upgrade HVAC systems[27]
  • In 2023, Exail won a $2.2 million contract to replace the gyrocompass on each ship[28]
  • In 2022, Appleton Marine won an $18.8 million contract to service the main crane and hydraulic systems[27]

Ships in the Keeper class

All of the ships were launched into the Menominee River in Marinette, Wisconsin. There they were completed and underwent builder's trials. When the Coast Guard accepted the ships, and ownership passed from Marinette Marine, they were placed "in commission, special" status. The crews were trained by Marinette personnel in Lake Michigan. They then sailed through the Great Lakes and out into the Atlantic to reach their new home ports. They made frequent stops. For example, Henry Blake, which had one of the longer trips from Marinette, made port calls in four countries and eleven states.[29] When the ships reached their new homes, a public commissioning ceremony was held, and the ships were placed "in commission, full" status.

NamePenant NumberLaunchedIn Commission, FullHome port ReplacedPhoto
Ida Lewis WLM-551 14 October 1995[30] 11 April 1997[31] Newport, Rhode Island[32] USCGC White Sage[33]
Katherine Walker WLM-552 14 September 1996[34] 1 November 1997[34] Bayonne, New Jersey[35] USCGC Red Beech[34]
Abbie Burgess WLM-553 5 April 1997[36] 31 July 1998[37] Rockland, Maine[38] USCGC White Lupine[39]
Marcus Hanna WLM-554 23 August 1997[40] 9 May 1998[41] South Portland, Maine[42] USCGC Spar[43]
James Rankin WLM-555 25 April 1998[44][41] 1 May 1999[45] Baltimore, Maryland[46] USCGC Red Birch[45]
Joshua Appleby WLM-556 8 August 1998[41] 7 May 1999[47] St. Petersburg, Florida[48] USCGC White Sumac[47]
Frank Drew WLM-557 5 December 1998[49][41] 5 April 2000[50] Portsmouth, Virgina[46] USCGC Red Cedar[50]
Anthony Petit WLM-558 30 January 1999[51] Ketchikan, Alaska[52] USCGC Planetree[53]
Barbara Mabrity WLM-559 27 March 1999[54] 20 November 1999[55] Mobile, Alabama[56]
William Tate WLM-560 8 May 1999[57] 3 June 2000[58] Philadelphia, Pennsylvania[46]
Harry Claiborne WLM-561 12 June 1999[54] 31 March 2000[59] Galveston, Texas[56] USCGC Papaw[60]
Maria Bray WLM-562 18 September 1999[54] 26 July 2000[61] Jacksonville, Florida[62] USCGC Laurel[63]
Henry Blake WLM-563 20 November 1999[64] 27 October 2000[65] Everett, Washington[66] USCGC Mariposa[67]
George Cobb[68] WLM-564 18 December 1999 27 October 2000 San Pedro, California USCGC Conifer[69]


References

  1. Department of Transportation and Related Agencies Appropriations for Fiscal Year 1992: Hearings Before the Subcommittee of the Committee on Appropriations, United States Senate. U.S. Government Printing Office. 1977. pp. 530–534. ISBN 978-0-16-037250-6.
  2. DiNicola, Commander Peter J. (July 1997). "The New Keeper Class WLM". Proceedings of the Marine Safety Council. 54 (3): 12–19.
  3. "Effect of OMB Circular A-109 on Major Systems Acquisition and Use of Competitive Procurement in the Department of Defense | U.S. GAO". www.gao.gov. Retrieved 2023-08-10.
  4. Faram, Mark D. (26 October 1992). "Coast Guard budget stays the course in '93". Navy Times. p. 27.
  5. Sprague, Chester M.; Holmstedt, Herbert A.; Romberg, Betty H.; Dolph, Brian L. (November 1996). Fire Safety Analysis of the 175' WLM(R) Coastal Buoy Tender (PDF). CompuCon. pp. B-61.
  6. Department of Transportation and Related Agencies Appropriations for Fiscal Year 1995: Hearings Before a Subcommittee of the Committee on Appropriations, United States Senate, One Hundred Third Congress, Second Session, on H.R. 4556, an Act Making Appropriations for the Department of Transportation and Related Agencies for the Fiscal Year Ending September 30, 1995, and for Other Purposes. U.S. Government Printing Office. 1995. p. 576. ISBN 978-0-16-046724-0.
  7. "Coast Guard Awards contract for construction of new buoy tender". US Department of Transportation News. 24 June 1993.
  8. "Marintte fime wins $22 million contract". Daily Tribune. 25 June 1993. p. 14.
  9. Monitoring of Seagoing and Coastal Buoy Tender Construction (PDF). Department of Transportation, Office of the Inspector General. 24 January 1997.
  10. O'Brien, Christina T.; Thornton, Lt. Chris (January 1996). "New Life". Commandant's Bulletin: 3–5.
  11. "Marinette Marine gets big contract". Leader-Telegram. 20 February 1997. p. 6.
  12. "Coast Guard Orders four more cutters from Marinette Marine". Green Bay Press-Gazette. 6 September 1997. p. 7.
  13. Department of Transportation and Related Agencies Appropriations for Fiscal Year 1993: Architectural and Transportation Barriers Compliance Board. U.S. Government Printing Office. 1992. pp. 398–399. ISBN 978-0-16-039599-4.
  14. Faram, Mark D. (22 November 1993). "New tender due in '96". Navy Times. p. 32.
  15. DiNicola, Commander Peter J. (June 1997). "The New Keeper Class WLM: The Future Has Arrived". The Bulletin. 59 (3): 32–34.
  16. Department of Transportation and Related Agencies Appropriations for Fiscal Year 1995: Department of Transportation, Washington Metropolitan Area Transit Authority. U.S. Government Printing Office. 1994. p. 569. ISBN 978-0-16-046724-0.
  17. O'Brien, Christina T.; Thornton, Lt. Chris (January 1996). "New Life". Commandant's Journal: 2–5.
  18. DiNicola, Commander Peter J. (1997). "The New Keeper Class WLM". Proceedings of the Marine Safety Council. 54 (3): 12–19.
  19. "USCG Maritime Information Exchange". cgmix.uscg.mil. Retrieved 2023-08-11.
  20. USCGC HARRY CLAIBORNE (WLM 561) SPECIFICATION FOR DRYDOCK REPAIRS (PDF). Surface Forces Logistics Center, United States Coast Guard. 2021.
  21. 175-ft WLM Keeper Class Guide for Ice Operations (PDF). Baltimore, Maryland: US Coast Guard. July 2011.
  22. Polmar, Norman (1997). Ships and Aircraft of the United States Fleet (16th ed.). Annapolis, Maryland: Naval Institute Press. p. 521. ISBN 1-55750-686-8.
  23. "USCGC Henry Blake (WLM 563)". www.pacificarea.uscg.mil. Retrieved 2023-08-11.
  24. "USCGC GEORGE COBB (WLM 564)". www.pacificarea.uscg.mil. Retrieved 2023-08-11.
  25. Boat Expenditure Plan (PDF). US Coast Guard. 12 June 2015.
  26. "Mercury Diesel Engines for 16 New USCG Boats". MarineLink. 2015-05-27. Retrieved 2023-08-11.
  27. "Coast Guard awards contract for work on coastal buoy tenders". United States Coast Guard. Retrieved 2023-08-09.
  28. ESD (2023-06-16). "Exail to Supply USCG Buoy Tenders with Advanced Navigation Systems". euro-sd.com. Retrieved 2023-08-09.
  29. "USCGC Henry Blake (WLM 563)". www.pacificarea.uscg.mil. Retrieved 2023-08-10.
  30. "First of buoy tenders is launched". Daily Tribune. 17 October 1995. p. 12.
  31. "Some sail into the fleet, others into history". Navy Times. 30 June 1997. p. 33.
  32. "USCGC Ida Lewis". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  33. "White Sage, 1947". United States Coast Guard. Retrieved 2023-08-09.
  34. "Big welcome Saturday for new buoy tender". Jersey Journal. 30 October 1997. p. 6.
  35. "USCGC Katherine Walker". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  36. "Marinette Marine will launch cutter". Green Bay Press-Gazette. 18 March 1997. p. 5.
  37. "Commissioning, decommissioning as of June 22". Navy Times. 20 July 1998. p. 41.
  38. "USCGC Abbie Burgess". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  39. Griffin, Walter (1 November 1997). "Rockland welcomes new buoy tender". Bangor Daily News. p. 17.
  40. "Coast Guard launches Marcus Hanna". Sun-Journal. 24 August 1997. p. 9.
  41. "1998 Review: Ships that came, ships that went". Navy Times. 26 October 1998. p. 14.
  42. "USCGC Marcus Hanna". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  43. Richardson, John (7 January 1998). "Cutter arrives at home shore bearing latest in technology". Portland Press Herald. p. 14.
  44. "Buoy tender will be launched Saturday". Green Bay Press-Gazette. 24 April 1998. p. 8.
  45. "Coast Commissions Cutter". Daily Times. 2 May 1999. p. 12.
  46. "USCG Fifth District Cutters". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  47. Coryell, George (8 May 1999). "New Coast Guard cutter to aid seafarers". Tampa Tribune. p. 17.
  48. "Sector Units". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  49. "Coast Guard ready to launch cutter named for Green Bay light tender". Post-Crescent. 5 December 1998. p. 16.
  50. Rogers, Richard William (15 April 2000). "Coast Guard launches new cutter into service". Daily Press. p. 15.
  51. "It floats! Launch thrills crowd". Green Bay Press-Gazette. 31 January 1999. p. 17.
  52. "17th District Units". www.pacificarea.uscg.mil. Retrieved 2023-08-08.
  53. "USCG's Newest Cutter Arrives in Ketchikan". MarineLink. 2000-01-27. Retrieved 2023-08-08.
  54. "Changes to the Fleet". Navy Times. 31 May 1999. p. 40.
  55. "COMMISSIONING OF CGC BARBARA MABRITY". DVIDS. Retrieved 2023-10-24.
  56. "District Units". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  57. "Buoy tender Tate to be launched". Green Bay Press-Gazette. 4 May 1999. p. 5.
  58. "Coast Guard to launch new cutter". Courier-Post. 2 June 2000. p. 17.
  59. Graczyk, Michael (1 April 2000). "A beacon remembered". Fort Worth Star-Telegram. p. 34.
  60. Phillips, Jeb (24 July 1999). "Retired from duty". Galveston Daily News. p. 1.
  61. St. Germain, Paul (2013). Lighthouses and Lifesaving Stations of Cape Ann. Charleston, South Carolina: Arcadia Publishing. p. 84. ISBN 978-1-4671-2020-3.
  62. "Sector Jacksonville Cutters". www.atlanticarea.uscg.mil. Retrieved 2023-08-08.
  63. Gnann, Paige G. (8 December 1999). "Laurel is retired". The Beaches Leader. p. 1.
  64. "Buoy tender launch scheduled Saturday". Green Bay Press-Gazette. 18 November 1999. p. 11.
  65. "Waiting For Duties". Columbian. 28 October 2000. p. 18.
  66. "USCGC Henry Blake (WLM 563)". www.pacificarea.uscg.mil. Retrieved 2023-08-08.
  67. Department of Transportation and Related Agencies Appropriations for Fiscal Year 2002: Hearings Before a Subcommittee of the Committee on Appropriations, United States Senate, One Hundred Seventh Congress, First Session, on H.R. 2299/S. 1178, an Act Making Appropriations for the Department of Transportation and Related Agencies for the Fiscal Year Ending September 30, 2002, and for Other Purposes. U.S. Government Printing Office. 2002. ISBN 978-0-16-068440-1.
  68. "USCGC GEORGE COBB (WLM 564)". www.pacificarea.uscg.mil. Retrieved 2023-08-08.
  69. Weikel, Dan (25 August 2002). "Navigating Waterways". Los Angeles Times. p. 114.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.