USS Washington (1776 lateen-rigged galley)

USS Washington was a lateen-rigged, two-masted galley in the service of the Continental Congress during the American Revolutionary War. Washington was capable of propulsion by sail or by the rowing of oarsmen. During a battle with British warships, Washington "struck her colors" and was captured by the British.

Model of Washington in the U.S. Navy Museum
History
United States
NameWashington
NamesakeGeorge Washington
BuilderContinental soldiers, Lake Champlain at Skenesborough, New York
CompletedFall 1776
In serviceOctober 1776
Out of serviceOctober 1776
Capturedby the British, 13 October 1776 retained by the British under the same name
Fateunknown
General characteristics
Typegalley
Displacement123 long tons (125 t)
Length72 ft 4 in (22.05 m)
Beam19 ft 7 in (5.97 m)
Depth6 ft 2 in (1.88 m)
Sail planlateen-rigged, two-masted
Complement80
Armament
Washington as built, drawn in 1776

Built on Lake Champlain

The third ship to be named Washington, a lateen-rigged, two-masted galley, was built on Lake Champlain at Skenesboro, New York, in the autumn of 1776. On 6 October 1776, the galley joined the small fleet established and commanded by Brigadier General Benedict Arnold.[1]

Design

Washington was 72 ft 4 in (22.05 m) long, 19 ft 7 in (5.97 m) wide with a draft of 6 ft 2 in (1.88 m)and a displacement of 123 long tons (125 t).[1]

She was armed with two 18-pounder long gun, two 12-pounder long gun, two 9-pounder guns, four 6-pounder guns, one 2-pounder gun, and eight swivel guns. Trumbull had a crew of 80 men.[2]

Service history

Battle of Valcour Island

Washington, commanded by Brigadier General David Waterbury, Arnold's second in command—was among Arnold's ships that anchored in the lee of Valcour Island to await the expected English move.[1]

When that lakeward push began, Capt. Thomas Pringle, of the Royal Navy, led a 25-ship fleet past Valcour Island on 11 October. Pringle sighted the American fleet after he had passed it and attacked from leeward. In the ensuing action, Washington suffered the heaviest damage of any ship in Arnold's fleet; Waterbury, her commander, subsequently reported that she was

... so torn to pieces that it was almost impossible to keep her above water.[1]

Arnold regrouped his shattered fleet and slipped past the British on 12 October with muffled oars, the Americans slipping noiselessly past Pringle's fleet in a desperate attempt at escape. However, after a long chase, the British caught the retreating Continental force the following day, on 13 October, at Split Rock near Crown Point.[1]

After the battle

Arnold managed to beach and destroy four of the galleys and his own flagship, Congress, while most of the remaining ships escaped upriver. Only Washington, at the rear of the van, was captured by the enemy; she struck her colors, as Arnold reported later, " ... after receiving a few broadsides."[1]

Final disposition

Washington was eventually taken into British service, apparently retaining her name, and was re-rigged as a brig. Her subsequent fate, however, is unrecorded.[1]

Citations

Bibliography

Online resources

  • DANFS (26 October 2015). "Washington III (Galley)". Dictionary of American Naval Fighting Ships. Naval History and Heritage Command. Retrieved 26 July 2016.Public Domain This article incorporates text from this source, which is in the public domain.
  • Priolo, Gary P. (15 July 2016). "Washington (III)". NavSource Naval History. Retrieved 29 July 2016.

Further reading

  • Nelson, James L (2006). Benedict Arnold's Navy. New York: McGraw Hill. ISBN 978-0-07-146806-0. OCLC 255396879.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.