Union Switch & Signal

Union Switch & Signal (commonly referred to as US&S) was an American company based in Pittsburgh, Pennsylvania, which focused on railway signaling equipment, systems and services. The company was acquired by Ansaldo STS (from 2015, Hitachi Rail STS) in 1988,[1] operating as a wholly-owned company until January 2009, when US&S was renamed "Ansaldo STS USA" to operate as a subsidiary of Ansaldo in the Americas and Asia.[2]

Union Switch & Signal Inc.
TypeSubsidiary (1917–)[1]
IndustryElectronics
Founded1881
FounderGeorge Westinghouse
DefunctJanuary 2009 (2009-01)[2]
FateFirst acquired by WABCo in 1917, then other owners. In January 2009, it became "Ansaldo STS USA".[2]
SuccessorAnsaldo STS USA[1]
Headquarters,
Area served
Worldwide
ProductsRailway signaling equipment, communication systems and services, level crossing signals
Number of employees
900 (2005)
ParentAnsaldo STS (1988)

History

Early years

George Westinghouse founded Union Switch & Signal Inc. in 1881, consolidating the assets of the Union Electric Signal Company (founded by track circuit inventor William Robinson)[3] and the Interlocking Switch & Signal Company (which had pioneered interlockings).[4] In 1925 US&S acquired the Hall Signal Company, primarily to obtain the latter company's patents for searchlight signals.[5]

Corporate management

US&S signal bridge, pictured in 1913

US&S operated as an independent company until 1917, when it became a subsidiary of the Westinghouse Air Brake Company (WABCO). In 1968, American Standard purchased WABCO and reorganized US&S as a separate division.[6]

In 1988, Ansaldo STS, a global supplier of signaling, control and automation systems, purchased US&S from American Standard.[4][7] In November 1993, US&S became a publicly traded company with shares listed on Nasdaq.[4] In December 1996, US&S merged with the other signaling investments of Ansaldo. As a result of that merger, US&S became a wholly owned subsidiary of Ansaldo STS. The company was renamed Ansaldo STS – USA in January 2009.[8] Ansaldo was acquired by Hitachi and Ansaldo STS became Hitachi Rail STS in 2019.

Throughout its history, US&S had manufacturing facilities in the borough of Swissvale, Pennsylvania, near Pittsburgh. The Swissvale plant was closed in 1985 and demolished in 1986.[9] US&S moved manufacturing operations to a facility in Batesburg-Leesville, South Carolina.[7] It maintained a research facility in Pittsburgh.[10]

Product development

Railway signaling

US&S built the first power interlocking system in the United States, a pneumatic design, in 1882 at East St. Louis, Illinois. Within several years the company developed an electro-pneumatic system, which was widely adopted by railroads across the country.[11]

In 1901 US&S developed the first electro-pneumatic automatic train stop system for the Boston Elevated Railway. This system was later adopted by the New York City Subway and other transit systems.[12] In 1908 the company introduced an electrically controlled highway crossing gate.[13]

In 1923 US&S developed the first inductive train control system. (See also pulse code cab signaling.) The company developed coded track circuits, supporting bi-directional cab signaling, in 1934.[4]

The first digital rail yard control system was built by US&S in 1970, for the Atchison, Topeka & Santa Fe railway at Kansas City, Kansas.[4]

The "Teardrop" mechanical bell

US&S first patented the Model 15A Highway crossing bell on February 20, 1917. The bell has been commonly referred to as the "Teardrop" bell by railroaders and signal fans alike because of its unique shape and thus the name has stuck. This bell has appeared on advertising literature for railroad signals as far back as the 1920s as far abroad as Chile and Italy on early wig wag crossings and flashers. There have been subtle variations in the Teardrop bell over the years ranging from different sized electric coils, inclusion of the patent date on the rain hood, as well as a very early version with a less characteristic rain hood that simply read "UNION, patent pending." This is the least commonly seen variation of the Teardrop. This bell is treasured by many signal collectors for its slow, low pitched ring at an irregular cadence. The production of this bell was discontinued sometime by the 1960s, but WABCO carried replacement castings and service manuals into the 1970s.

Wartime production

During the World War I the Le Rhône 9C 9 cylinder rotary engine was manufactured under license by Union Switch & Signal. It was one of the most common engines for fighter planes from different companies and around 10,000 were made at Swissvale.[14]

Union Switch & Signal was one of the five contractors (including Colt, Remington-Rand, Ithaca Gun Company, and Singer Sewing Machine) to make M1911A1 pistols during World War II. The production blocks assigned to them in 1943 were between SN's 1,041,405 to 1,096,404. Colt duplicated 4,171 pistols in the 1,088,726 to 1,092,896 SN range. Since only 55,000 1911A1's were produced by US&S, they are highly collectible. The reason for the low production numbers is US&S was the last company awarded a government contract and as requirements were reduced in early 1943, the last contract awarded became the first to be cancelled. As a general rule, US&S produced high quality pistols. With the government-owned machine tooling already in place at US&S, they were offered a subcontract arrangement to produce M1 Carbine components. Only Singer produced fewer 1911A1's at 500 total production.[15]

Modern products

Level crossing signal

Mechanism of a searchlight signal made by Union Switch & Signal in 1944 for the Rock Island Railroad
US&S Model 14 power interlocking machine (1922)

Wayside signaling equipment

Central Control signaling equipment

Note
  • 1 US&S was the only company to make 180 degree electronic bells.

See also

References

  1. Smith, Brady (March 13, 2014). "Let's Learn From the Past: Union Switch & Signal Co". Pittsburgh Post-Gazette. Archived from the original on April 9, 2015.
  2. Ansaldo STS USA on Ansaldo website (archived, March 8, 2009)
  3. American Railway Association (1922). The Invention of the Track Circuit. New York. p. 59.{{cite book}}: CS1 maint: location missing publisher (link)
  4. "History of Ansaldo - key milestones". Ansaldo STS. May 13, 2011. Archived from the original on November 10, 2011.
  5. Solomon, Brian (2003). Railroad Signaling. MBI Publishing. p. 55. ISBN 978-0-7603-1360-2.
  6. American Standard Brands, Piscataway, NJ. "1968: WABCO Joins Forces with American Standard." The History of American Standard. Accessed 2011-06-11.
  7. McKay, Jim (September 24, 1993). "Union Switch showing strength". Pittsburgh Post-Gazette. p. 10.
  8. "Ansaldo STS USA". Our Companies. Ansaldo STS. June 25, 2011. Archived from the original on March 21, 2012.
  9. "Photographs from the Union Switch & Signal Collection". Historic Pittsburgh. University of Pittsburgh. Retrieved June 13, 2016.
  10. Massey, Steve (March 4, 1993). "Union Switch move sends a signal". Pittsburgh Post-Gazette. p. 14.
  11. Union Switch & Signal (1914). Electro-Pneumatic Interlocking. Swissvale, Pennsylvania. pp. 9–11.{{cite book}}: CS1 maint: location missing publisher (link)
  12. US&S (1911). Automatic Block Signalling for Interurban Electric Railways. Swissvale, Pennsylvania. p. 33.{{cite book}}: CS1 maint: location missing publisher (link) Bulletin No. 57.
  13. US&S. Model 14 Electric Crossing Gate. Swissvale, Pennsylvania. Bulletin No. 79.
  14. "Le Rhone Model C, 9 Cylinder, Rotary Engine". Smithsonian National Air and Space Museum.
  15. Collector's Guide to Colt .45 Service Pistols Models of 1911 and 1911A1 by Charles w. Clawson
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.