Volvo Kalmar Assembly

The Volvo Kalmar plant was a production facility of Volvo Cars, just outside Kalmar, Sweden. Construction began in 1971 and it opened in 1974.[1] The plant was one of the most revolutionary automotive production plants in the world at the time. Using Volvo Halifax Assembly and Volvo Torslanda Assembly as examples, the Kalmar plant also introduced the group assembly system.[2][3]

Description

At Kalmar production was carried out on 18 ft. battery-driven carriers, which held one single car body at a time. The carriers were designed to swivel and rotate the individual bodies so that workers could access every aspect of the car in a practical fashion. The best advantage with those carriers, was that they held car in best possible ergonomic position, and by that reduce the personnel's work related injuries. The carriers was not locked in as in a traditional assembly line, they were following wires embedded in the floor, and could by that move around more freely. By then the carriers could i.e. be parked in buffer zones, if there was disturbance due to missing parts.

The plant was closed in 1994.[4]

Team Assembly System

The teams organized themselves any way they wished and at the speed they choose. While a worker on a conventional assembly line might spend his entire shift mounting one license-plate lamp after another, every member of a Kalmar work team may work at one time or another on all parts of the electrical system—from taillights to turn signals, head lamps, horn, fuse box and part of the electronically controlled fuel injection system. The only requirement is that every team meet its production goal for a shift.

As long as cars roll out on schedule, workers are free to take coffee breaks when they please or to refresh themselves in comfortable lounges equipped with kitchens and saunas. The group assembly system operated in two ways, docked or in-line.

Docked assembly was carried out by teams of 2-3 that covered one aspect of the car on multiple vehicles or docked where teams of 3 built entire individual vehicles from the ground up. There were 25 production teams in total at Kalmar and every team had access to their own individual break room, workshop and sauna.

Models produced

References
  1. "Volvo Kalmarverken" (in Swedish). 28 February 2013. Retrieved 2019-02-27.
  2. "Volvo Service Workshop Repair Manuals for Cars and Trucks". Retrieved 2023-09-28.
  3. Åke Sandberg (1995). "Enriching Production: Perspectives on Volvo's Uddevalla plant as an alternative to lean production" (PDF). Retrieved 2019-02-27.
  4. Sophie Nachemson (18 May 1994). "Volvo stänger i förtid. Sista bilen från Kalmarfabriken rullar ut inom en månad" [Volvo shuts down early. The last car from the Kalmar assembly plant will roll out within a month.] (in Swedish). Dagens Nyheter. Archived from the original on 2017-02-15. Retrieved 2019-02-27.
  5. "1980". www.media.volvocars.com (in Swedish). Volvo Car Corporation. 8 January 2003. Retrieved 2019-02-27.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.