Indian locomotive class WAP-4

The WAP-4 class was developed after its predecessor, the WAP-1, was found inadequate to haul the longer, heavier express trains (24-26 coaches) that were becoming the mainstay of the Indian Railways network. IR/RDSO had realized that the reason for the WAP-1’s performance problems were the low-powered 770 hp Alstom TAO 659 traction motors. These were previously used with for the WAM-4 and WAG-5 classes but were too underpowered for modern requirements. At that time, new 840 hp Hitachi 15250 traction motors which had been adopted for use on newer WAG-5s was showing promise. So, these traction motors were adopted on to WAP-1s Flexicoil Mark I fabricated bogies, and with a new indigenously designed 5400 kVA transformer and silicon rectifiers.[1]

It also was among the first locomotives to get a microprocessor-based control and fault diagnostics system. To accommodate the heavier Hitachi motors without increasing its 112t overall weight, the WAP-4 was made substantially lighter by the widespread use of aluminum materials in construction. The underframe of WAP-4 is narrower and lighter and also completely different from that of the WAP-1 to enable it to handle higher loads.[2][3]

(front) newer loco with (back) older series unit

The loco has a streamlined twin cab carbody design, with top-mounted headlamps. The first 150 or so units had the headlamp mounted at waist level, with the lights being mounted in a protruding nacelle. Later on the headlamps were placed in a recessed nacelle, and from road # 22573 onward, the headlamps were moved to the top. Newer locos also feature larger windshields, more spacious driver cabin with bucket type seats and ergonomic controls. The control panel also features a mix of digital and analog displays in newer units (all analog display in older versions).[4]

The first WAP-4 unit, #22201 rolled out from CLW on April 25, 1994. They looked exactly like the WAP-1, even sporting the same livery. From 2000, newer versions with many WAP-5 design cues like square type windscreens ,twin-beam headlights, speed recorders and some changes to the control electronics had been rolled out recently.

However, in the face of the advent of three-phase AC traction motors, IGBT-controlled AC drives, and full computer controls, the DC traction motors was getting increasingly outdated. So the last unit, #25051 was manufactured on November 1, 2015 making 776 of these locomotives produced over 20 years.[5]