Wide-angle lens

A lens is considered wide-angle when it covers the angle of view between 64° and 84° which in return translates to a 35–24mm lens in 35mm film format.

Longer lenses magnify the subject more, apparently compressing distance and (when focused on the foreground) blurring the background because of their shallower depth of field. Wider lenses tend to magnify the distance between objects while allowing greater depth of field.

Another result of using a wide-angle lens is a greater apparent perspective distortion when the camera is not aligned perpendicularly to the subject: parallel lines converge at the same rate as with a normal lens but converge more due to the wider total field. For example, buildings appear to be falling backward much more severely when the camera is pointed upward from ground level than they would if photographed with a normal lens at the same distance from the subject because more of the subject building is visible in the wide-angle shot.

Because different lenses generally require a different camera–subject distance to preserve the size of a subject, changing the angle of view can indirectly distort perspective, changing the apparent relative size of the subject and foreground.

For a full-frame 35 mm camera with a 36 mm by 24 mm format, the diagonal measures 43.3 mm, and by custom, the normal lens adopted by most manufacturers is 50 mm. Also by custom, a lens of focal length 35 mm or less is considered wide-angle.

Ultra wide angle lenses have a focal length shorter than the short side of the film or sensor. In 35 mm, an ultra wide-angle lens has a focal length shorter than 24 mm.

Common wide-angle lenses for a full-frame 35 mm camera are 35, 28, 24, 21, 20, 18, and 14 mm, the latter four being ultra-wide. Many of the lenses in this range will produce a more or less rectilinear image at the film plane, though some degree of barrel distortion is not uncommon.

Ultra wide-angle lenses that do not produce a rectilinear image (i.e., exhibit barrel distortion) are called fisheye lenses. Common focal lengths for these in a 35 mm camera is 6 to 8 mm (which produce a circular image). Lenses with focal lengths of 8 to 16 mm may be either rectilinear or fisheye designs.

Wide-angle lenses come in both fixed-focal-length and zoom varieties. For 35 mm cameras, lenses producing rectilinear images can be found at focal lengths as short as 8 mm, including zoom lenses with ranges of 2:1 that begin at 12 mm.

Field of view in APS-sized digital cameras is the same as that of a longer lens, increased by crop factor, on a full-frame 35 mm format camera.

As of 2015, many interchangeable-lens digital cameras have image sensors that are smaller than the film format of full-frame 35 mm cameras.[lower-alpha 1] For the most part, the dimensions of these image sensors are similar to the APS-C image frame size, i.e., approximately 24 mm x 16 mm. Therefore, the angle of view for any given focal-length lens will be narrower than it would be in a full-frame camera because the smaller sensor "sees" less of the image projected by the lens. The camera manufacturers provide a crop factor (sometimes called a field-of-view factor or a focal-length multiplier) to show how much smaller the sensor is than a full 35 mm film frame. For example, one common factor is 1.5 (Nikon DX format and some others), although many cameras have crop factors of 1.6 (most Canon DSLRs), 1.7 (the early Sigma DSLRs) and 2 (the Four Thirds and Micro Four Thirds cameras). The 1.5 indicates that the angle of view of a lens on the camera is the same as that of a 1.5 times longer focal length on a 35 mm full-frame camera, which explains why the crop factor is also known as a focal-length multiplier. For example, a 28 mm lens on the DSLR (given a crop factor of 1.5) would produce the angle of view of a 42 mm lens on a full-frame camera. So, to determine the focal length of a lens for a digital camera that will give the equivalent angle of view as one on a full-frame camera, the full-frame lens focal length must be divided by the crop factor. For example, to get the equivalent angle of view of a 30 mm lens on a full-frame 35 mm camera, from a digital camera with a 1.5 crop factor, one would use a 20 mm lens.

Lens manufacturers have responded by making wide-angle lenses of much shorter focal lengths for these cameras. In doing this, they limit the diameter of the image projected to slightly more than the diagonal measurement of the photosensor. This gives the designers more flexibility in providing the optical corrections necessary to economically produce high-quality images at these short focal lengths, especially when the lenses are zoom lenses. Examples are 10 mm minimum focal length zoom lenses from several manufacturers. At 10 mm, these lenses provide the angle of view of a 15 mm lens on a full-frame camera when the crop factor is 1.5.

Cross-section of a typical short-focus wide-angle lens.

Cross-section of a typical retrofocus wide-angle lens.

There are two varieties of wide-angle lens: short-focus lenses and retrofocus lenses. Short-focus lenses are generally made up of multiple glass elements whose shapes are more or less symmetrical in front of and behind the diaphragm. As the focal length decreases, the distance of the rear element of the lens from the film plane or digital sensor also decreases.

This makes short-focus wide-angle lenses undesirable for single-lens reflex cameras unless they are used with the reflex mirrors locked up. On large format view cameras and rangefinder cameras, short-focus lenses are widely used because they give less distortion than the retrofocus design and there is no need for a long back focal distance.

Effective focal length is measured from the sensor to where the light cone going to the sensor is the same size as the lens front opening.

The retrofocus lens solves this proximity problem through an asymmetrical design that allows the rear element to be farther away from the film plane than its effective focal length would suggest. (See Angénieux retrofocus.)

For example, it is not uncommon for the rear element of a retrofocus lens of 18 mm to be more than 25 mm from the film plane. This makes it possible to design wide-angle lenses for single-lens reflex cameras.

The axial adjustment range for focusing Ultra wide angle lenses and some Wide-angle lenses in large format cameras is usually very small. Some manufacturers (e.g. Linhof) have offered special focusing lens mounts, so-called 'wide-angle focusing devices' for their cameras that allow the lens to be focused precisely without moving the entire front standard.

The first wide angle lens was developed in the 1850s by photographer Thomas Sutton. It involved a water filled lens creating panoramic visuals without the use of a rotating body.[3]

• Media related to Wide-angle lenses at Wikimedia Commons
• The physics of Rectilinear and Equidistant wide angle lenses