Wyoming Highway 270

Wyoming Highway 270 (WYO 270) is a 73.37-mile-long (118.08 km) northsouth Wyoming State Road located in northeastern Platte County and southwestern Niobrara County.

Wyoming Highway 270 marker

Wyoming Highway 270

WYO 270 highlighted in red
Route information
Maintained by WYDOT
Length73.37 mi[1] (118.08 km)
Major junctions
South end US 26 in Guernsey
Major intersections US 18 / US 20 in Manville
North end US 18 / US 85
Location
CountryUnited States
StateWyoming
CountiesPlatte, Niobrara
Highway system
  • Wyoming State Highway System
WYO 259 WYO 271
WYO 317 WYO 319

Route description

Guernsey to Manville

Wyoming Highway 270 starts at its southern end in Platte County at US 26 on the eastern edge of Guernsey. From here Highway 270 heads north as Hartville Highway on its way to the town of the same name. WYO 270 reaches Hartville at approximately 4.5 miles, and intersects the western terminus of Wyoming Highway 318 (Main Street).[1] Wyoming Highway 270 continues north, leaving Hartville to head north to Manville and Lance Creek.[2] At almost 40 miles, WYO 270 intersects US 18/US 20 just before entering Manville. Upon entering Manville, the former Wyoming Highway 274 (9th Avenue) is intersected. Highway 274 was designated for the old alignment of US 18/US 20, but was decommissioned in the early 1990s.[2]

Manville to End

North of Manville, Highway 270 heads to Lance Creek and intersects the eastern terminus of Wyoming Highway 271 (Twentymile Road).[1] Wyoming Highway 270 then begins to turn east as the last length of its routing is primarily eastwest. Wyoming Highway 272 (N. Lance Creek Road) is intersected at just under 61 miles. At just over 73 miles, WYO 270 reaches its northern (or eastern) end at US 18/US 85 north of Lusk.[1][2]

History

The section of Wyoming Highway 270 from US 26 at Guernsey north to Hartville at present day Wyoming Highway 318 was formerly designated as Wyoming Highway 318 prior to the 1970s. Highway 318 used to begin as US 26 at Guernsey and end at Sunrise with a 90 degree turn at Hartville. The stretch between Guernsey and Hartville was recommissioned as Wyoming Highway 270 when that road was completed between Manville and Hartville.[3]

Major intersections

Ranch road leaving Highway 270
CountyLocation[4]mikmDestinationsNotes
Platte0.000.00 US 26Southern terminus
Hartville4.537.29
WYO 318 east
Western terminus of WYO 318
Niobrara39.5563.65 US 18 / US 20
Manville39.8264.089th AvenueFormer routing of WYO 274
Lance Creek57.9793.29
WYO 271 west
Eastern terminus of WYO 271
60.7397.74
WYO 272 north
Southern terminus of WYO 272
73.37118.08 US 18 / US 85Northern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

See also

References

  1. Google (21 December 2016). "Wyoming Highway 270" (Map). Google Maps. Google. Retrieved 21 December 2016.
  2. Wyoming Highway 270
  3. Wyoming Highway 318
  4. Geography Division (2016). "Wyoming Governmental Unit Reference Map". United States Census Bureau. Retrieved January 24, 2017.
  • Official 2003 State Highway Map of Wyoming
Template:Attached KML/Wyoming Highway 270
KML is from Wikidata
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.