VIC-20

The VIC-20 was intended to be more economical than the PET computer. It was equipped with 5 KB of static RAM and used the same MOS 6502 CPU as the PET. The VIC-20's video chip, the MOS Technology VIC, was a general-purpose color video chip designed by Al Charpentier in 1977 and intended for use in inexpensive display terminals and game consoles, but Commodore could not find a market for the chip.

As the Apple II gained momentum with the advent of VisiCalc in 1979, Jack Tramiel wanted a product that would compete in the same segment, to be presented at the January 1980 CES. For this reason Chuck Peddle and Bill Seiler started to design a computer named TOI (The Other Intellect). The TOI computer failed to materialize, mostly because it required an 80-column character display which in turn required the MOS Technology 6564 chip. However, the chip could not be used in the TOI since it required very expensive static RAM to operate fast enough.

In the meantime, new engineer Robert Yannes at MOS Technology (then a part of Commodore) designed a computer in his home dubbed the MicroPET and finished a prototype with help from Al Charpentier and Charles Winterble. With the TOI unfinished, when Jack Tramiel was shown the MicroPET prototype, he immediately said he wanted it to be finished and ordered it to be mass-produced following a limited demonstration at the CES.

As the new decade began, the price of computer hardware was dropping and Tramiel saw an emerging market for low-price computers that could be sold at retail stores to relative novices rather than professionals or people with an electronics or programming background. Radio Shack had been achieving considerable success with the TRS-80 Model I, a relatively low-cost machine that was widely sold to novices and in 1980 released the Color Computer, which was aimed at the home and educational markets, used ROM cartridges for software, and connected to a TV set.

Software cartridge

The prototype produced by Yannes had very few of the features required for a real computer, so Robert Russell at Commodore headquarters had to coordinate and finish large parts of the design under the codename Vixen. The parts contributed by Russell included a port of the operating system (kernel and BASIC interpreter) taken from John Feagans design for the Commodore PET, a character set with the characteristic PETSCII, an Atari CX40 joystick-compatible interface, and a ROM cartridge port. The serial IEEE-488-derivative CBM-488 interface[10] was designed by Glen Stark. It served several purposes, including costing substantially less than the IEEE-488 interface on the PET, using smaller cables and connectors that allowed for a more compact case design, and also complying with newly imposed FCC regulations on RFI emissions by home electronics (the PET was certified as Class B office equipment which had less stringent RFI requirements). Some features, like the memory add-in board, were designed by Bill Seiler.

The startup screen of the VIC-20.

Altogether, the VIC 20 development team consisted of five people led by Michael Tomczyk the product manager, who recruited the group and dubbed them the VIC Commandos. Commodore founder Jack Tramiel initially gave Tomczyk the title VIC Czar and later appointed him product manager. Tomczyk insisted on several features including full-size typewriter keys, programmable function keys and a built-in RS-232 interface. Michael later contracted and co-designed a $100 modem, the VICModem, which became the first modem to sell 1 million units.[11] According to one of the development team, Neil Harris, "[W]e couldn't get any cooperation from the rest of the company who thought we were jokers because we were working late, about an hour after everyone else had left the building. We'd swipe whatever equipment we needed to get our jobs done. There was no other way to get the work done! [...] they'd discover it was missing and they would just order more stuff from the warehouse, so everybody had what they needed to do their work."[11]

At the time, Commodore had a glut of 1 Kbit×4[2] SRAM chips, so Tramiel decided these should be used in the new computer. The result was arguably closer to the PET or TOI computers than to Yannes' prototype, albeit with a 22-column VIC chip instead of the custom chips designed for the more ambitious computers. As the amount of memory on the VIC-20's system board was very small even for 1981 standards, the design team could get away with using more expensive SRAM due to its lower power consumption, heat output, and less supporting circuitry. The original Revision A system board found in all silver-label VIC-20s used 2114 SRAMs and due to their tiny size (only 512 bytes per chip), ten of them were required to reach 5 KB[2] of system RAM. The Revision B system board, found in rainbow logo VIC-20s (see below) switched to larger 2048-byte SRAMs which reduced the memory count to five chips: 2× 2048-byte chips + 3× 2114 (the 1024 × 4 bits) chips.

While newer PETs had the upgraded BASIC 4.0, which had disk commands and improved garbage collection, the VIC-20 reverted to the 8 KB BASIC 2.0 used on earlier PETs as part of another of the design team's goals, which was limiting the system ROMs to only 20 KB.[2] Since Commodore's BASIC had been designed for the PET which had only limited audiovisual capabilities, there were no dedicated sound or graphics features, thus VIC-20 programmers had to use large numbers of POKE and PEEK statements for this. This was in contrast to the computer's main competitors, the Atari 400 and TRS-80 Color Computer, both of which had full-featured BASICs with support for the machines' sound and graphics hardware. Supplying a more limited BASIC in the VIC-20 would keep the price low and the user could purchase a BASIC extender separately if they desired sound or graphics commands.

While the TRS-80 Color Computer and Atari 400 had only RF video output, the VIC-20 instead had composite output, which provided a sharper, cleaner picture if a dedicated monitor was used. An external RF modulator was necessary to use the computer with a TV set, and had not been included internally so as to comply with FCC regulations (Commodore lobbied for and succeeded in getting them relaxed slightly by 1982, so the C64 had an RF modulator built in).

The VIC-1001 is the Japanese version of the VIC-20. It has Japanese-language characters in the ROM[12] and on the front of the keys.

In April 1980, at a meeting of general managers outside London, Jack Tramiel declared he wanted a low-cost color computer. When most of the GMs argued against it, preferring Peddle's more sophisticated design, he said: "The Japanese are coming, so we must become the Japanese!" (in reference to the threats of low-cost systems from Japan).[13][14] This was in keeping with Tramiel's philosophy which was to make "computers for the masses, not the classes". The concept was supported at the meeting by Tomczyk, newly hired marketing strategist and assistant to the president; Tony Tokai, General Manager of Commodore Japan, and Kit Spencer, the UK's top marketing executive. Peddle disagreed with the decision and left the company with other engineers, so an engineering team in Commodore Japan led by Yash Terakura helped finish the design. The VIC-20 was marketed in Japan as VIC-1001 before VIC-20 was introduced to the US.[14]

When they returned to California from that meeting, Tomczyk wrote a 30-page memo detailing recommendations for the new computer, and presented it to Tramiel. Recommendations included programmable function keys (inspired by competing Japanese computers),[15] full-size typewriter-style keys, and built-in RS-232. Tomczyk insisted on "user-friendliness" as the prime directive for the new computer, to engineer Terakura,[15] and proposed a retail price of US$299.95. He recruited a marketing team and a small group of computer enthusiasts, and worked closely with colleagues in the UK and Japan to create colorful packaging, user manuals, and the first wave of software programs (mostly games and home applications).

Scott Adams was contracted to provide a series of text adventure games. With help from a Commodore engineer who came to Longwood, Florida, to assist in the effort, five of Adams's Adventure International game series were ported to the VIC. They got around the limited memory of VIC-20 by having the 16 KB[2] games reside in a ROM cartridge instead of being loaded into main memory via cassette as they were on the TRS-80 and other machines. The first production run of the five cartridges generated over $1,500,000 in sales for Commodore.

While the PET was sold through authorized dealers the VIC-20 primarily sold at retail, especially discount and toy stores, where it could compete directly with game consoles. It was the first computer to be sold in K-Mart. Commodore took out advertisements featuring actor William Shatner (of Star Trek fame) as its spokesman, asking: "Why buy just a video game?" and describing it as "The Wonder Computer of the 1980s". Television personality Henry Morgan (best known as a panelist on the TV game show I've Got a Secret) became the commentator in a series of Commodore product ads.

The "20" in the computer's name was widely assumed to refer to the text width of the screen (although in fact the VIC-20 has 22-column text, not 20) or that it referred to the combined size of the system ROMs (8 KB BASIC+8 KB KERNAL+4 KB character ROM).[2] Bob Yannes claimed that "20" meant nothing in particular and "We simply picked '20' because it seemed like a friendly number and the computer's marketing slogan was 'The Friendly Computer'. I felt it balanced things out a bit since 'Vic' sounded like the name of a truck driver."

In 1981, Tomczyk contracted with an outside engineering group to develop a direct-connect modem-on-a-cartridge (the VICModem), which at US$99 became the first modem priced under US$100. The VICModem was also the first modem to sell over 1 million units. VICModem was packaged with US$197.50 worth of free telecomputing services from The Source, CompuServe and Dow Jones. Tomczyk also created a SIG called the Commodore Information Network to enable users to exchange information and take some of the pressure off of Customer Support inquiries, which were straining Commodore's lean organization. In 1982, this network accounted for the largest traffic on CompuServe.

The VIC-20 went through several variations in its three and a half years of production. First-year models (1980) had a PET-style keyboard with a blocky font while most VIC-20s made during 1981 had a slightly different keyboard also shared with early C64s. The rainbow logo VIC-20 was introduced in early 1983 and has the newer C64 keyboard with gray function keys and the Revision B motherboard. It has a similar power supply to the C64 PSU, although the amperage is slightly lower. A C64 "black brick" PSU is compatible with Revision B VIC-20s; however, the VIC's PSU is not recommended on a C64 if any external devices, such as cartridges or user port accessories, are installed, as it will overdraw the available power. Older Revision A VIC-20s cannot use a C64 PSU or vice versa as their power requirement is too high.

The VIC-20 was a bestselling computer, becoming the first personal computer to sell over a million. In total, 2.5 million computers were manufactured.[16][17] In summer 1982, Commodore unveiled the Commodore 64, a more advanced machine with 64 KB[2] of RAM and considerably improved sound and graphics. Initial sales of the C64 were slow, but took off in mid-1983. The VIC-20 was widely available for under $90 by that time.[18] Commodore discontinued the VIC-20 in January 1985.[4]

Perhaps the last new commercially available VIC-20 peripheral was the VIC-Talker, a speech synthesizer. Ahoy! wrote in January 1986, "Believe it or not, a new VIC accessory...We were as surprised as you."[19]

The VIC-20 has card edge connectors for program/expansion cartridges and a PET-standard Datassette tape drive. The VIC-20 did not originally have a disk drive; the VIC-1540 disk drive was released in 1981.

The side of the computer showing the joystick "control port"

There is one Atari joystick port, compatible with the digital joysticks and paddles used with Atari VCS and Atari 8-bit family;[24] a serial CBM-488 bus (a serial version of the PET's IEEE-488 bus) for daisy chaining disk drives and printers; a TTL-level "user port" with both RS-232 and Centronics signals (most frequently used as RS-232, for connecting a modem[25]).

The VIC has a ROM cartridge port for games and other software as well as for adding memory to the machine. Port expander boxes from Commodore and other vendors allow more than one cartridge to be attached at a time. Cartridge size ranges from 4–16 KB[2] in size, although the latter was uncommon due to its cost.

The VIC-20 can be hooked into external electronic circuitry via joystick port, the "user port," or the memory expansion cartridge port, which exposes various analog to digital, memory bus, and other internal I/O circuits to the experimenter. PEEK and POKE commands from BASIC can be used to perform data acquisition from temperature sensors, control robotic stepper motors, etc.

The MOS Technology 6561 VIC chip

The graphics capabilities of the VIC chip (6560/6561) are limited but flexible. At startup the screen shows 176×184 pixels, with a fixed-color border to the edges of the screen. Since a PAL or NTSC screen has a 4:3 width-to-height ratio, each VIC pixel is much wider than it is high. The screen normally shows 22 columns and 23 rows of 8-by-8-pixel characters; it is possible to increase these dimensions up to 27 columns, but the characters would soon run out the sides of the monitor at about 25 columns. Just as on the PET, two different 256 character sets are included, the uppercase/graphics character set and the upper/lowercase set, and reverse video versions of both. Normally, the VIC-20 operates in high-resolution mode whereby each character is 8×8 pixels in size and uses one color. A lower-resolution multicolor mode can also be used with 4×8 characters and three colors each, but it is not used as often due to its extreme blockiness.

16-color capability

The VIC chip does not support a true bitmap mode, but programmers can define their own custom character sets. It is possible to get a fully addressable screen, although slightly smaller than normal, by filling the screen with a sequence of different double-height characters, then turning on the pixels selectively inside the RAM-based character definitions. The Super Expander cartridge adds BASIC commands supporting such a graphics mode using a resolution of 160×160 pixels. It is also possible to fill a larger area of the screen with addressable graphics using a more dynamic allocation scheme, if the contents are sparse or repetitive enough. This is used by the port of Omega Race.

The VIC chip has readable scan-line counters but cannot generate interrupts based on the scan position. The two VIA timer chips can serve this purpose through an elaborate programming technique, allowing graphics to be mixed with text above or below it, two different background and border colors, or more than 200 characters for the pseudo-high-resolution mode.

The VIC chip can process a light pen signal via the joystick port, but few appeared on the market.

The VIC chip outputs Luma+Sync and Chroma video signals, which is combined to create the VIC-20's composite video output. Commodore did not include an RF modulator inside the computer's case because of FCC regulations. It can either be attached to a dedicated monitor or a TV set using the external modulator included with the computer.

The VIC chip has three pulse wave generators and a white noise generator with an overall volume control and mono output. Each pulse wave generator has a range of three octaves located on the scale about an octave apart, giving a total range of about five octaves.