Nautical mile

Historical definition – 1 nautical mile

There is no single internationally agreed symbol, with several symbols in use.[1]

• M is used as the abbreviation for the nautical mile by the International Hydrographic Organization.[4]
• NM is used by the International Civil Aviation Organization.[5][6]
• nmi is used by the Institute of Electrical and Electronics Engineers[7] and the United States Government Publishing Office.[8]
• nm is a non-standard abbreviation used in many maritime applications and texts, including U.S. Government Coast Pilots and Sailing Directions.[9] It conflicts with the SI abbreviation for nanometre.

Visual comparison of a kilometre, statute mile and nautical mile

The word mile is from the Latin word for a thousand paces: mille passus. Navigation at sea was done by eye[10] until around 1500 when navigational instruments were developed and cartographers began using a coordinate system with parallels of latitude and meridians of longitude.

By the late 16th century, Englishmen knew that the ratio of distances at sea to degrees was constant along any great circle such as the equator or any meridian, assuming that Earth was a sphere. Robert Hues wrote in 1594 that the distance along a great circle was 60 miles per degree, that is, one nautical mile per arcminute.[11] Edmund Gunter wrote in 1623 that the distance along a great circle was 20 leagues per degree.[11] Thus, Hues explicitly used nautical miles while Gunter did not.

Since the Earth is not a perfect sphere but is an oblate spheroid with slightly flattened poles, a minute of latitude is not constant, but about 1,861 metres at the poles and 1,843 metres at the Equator.[12] France and other metric countries state that in principle a nautical mile is an arcminute of a meridian at a latitude of 45°, but that is a modern justification for a more mundane calculation that was developed a century earlier. By the mid-19th century, France had defined a nautical mile via the original 1791 definition of the metre, one ten-millionth of a quarter meridian.[13][14] Thus 10,000,000 m/90 × 60 = 1,851.85 m ≈ 1,852 m became the metric length for a nautical mile. France made it legal for the French Navy in 1906, and many metric countries voted to sanction it for international use at the 1929 International Hydrographic Conference.

Both the United States and the United Kingdom used an average arcminute, specifically, a minute of arc of a great circle of a sphere having the same surface area as the Clarke 1866 ellipsoid.[15] The authalic (equal area) radius of the Clarke 1866 ellipsoid is 6,370,997.2 metres (20,902,222 ft).[16] The resulting arcminute is 1,853.2480 metres (6,080.210 ft). The United States chose five significant digits for its nautical mile, 6,080.2 feet, whereas the United Kingdom chose four significant digits for its Admiralty mile, 6,080 feet.

In 1929, the international nautical mile was defined by the First International Extraordinary Hydrographic Conference in Monaco as exactly 1,852 metres.[1] The United States did not adopt the international nautical mile until 1954.[17] Britain adopted it in 1970,[18] but legal references to the obsolete unit are now converted to 1,853 metres.[19]

The metre was originally defined as 1⁄10,000,000 of the length of the meridian arc from the North pole to the equator,[lower-alpha 3] thus one kilometre of distance corresponds to one centigrad (also known as centesimal arc minute) of latitude. The Earth's circumference is therefore approximately 40,000 km. The equatorial circumference is slightly longer than the polar circumference – the measurement based on this (40,075.017 km/360 × 60 = 1,855.3 metres) is known as the geographical mile.

Using the definition 1/60 of a degree of latitude on Mars, a Martian nautical mile equals to 983 m (1,075 yd). This is potentially useful for celestial navigation on a human mission to the planet, both as a shorthand and a quick way to roughly determine the location.[21]

• Conversion of units
• Orders of magnitude (length)