Boeing 777

The Boeing 777, commonly referred to as the Triple Seven, is an American long-range wide-body airliner developed and manufactured by Boeing Commercial Airplanes. It is the world's largest twinjet.[4][5] The 777 was designed to bridge the gap between Boeing's other wide body airplanes, the twin-engined 767 and quad-engined 747, and to replace older DC-10s and L-1011 trijets. Developed in consultation with eight major airlines, with a first meeting in January 1990, the program was launched in October, with an order from United Airlines. The prototype was rolled out in April 1994, and first flew in June. The 777 entered service with the launch customer, United Airlines, in June 1995. Longer range variants were launched in 2000, and were first delivered in 2004.

Boeing 777
The first Boeing 777 built, operated by Cathay Pacific in 2011. The 777 is a low-wing twinjet; the original -200 is the shortest variant.
Role Wide-body jet airliner
National origin United States
Manufacturer Boeing Commercial Airplanes
First flight June 12, 1994
Introduction June 7, 1995 with United Airlines
Status In production
Primary users Emirates
United Airlines
Air France
Cathay Pacific
Produced 1993–present
Number built 1,695 as of September 2022 based on deliveries[1][2][3]
Developed into Boeing 777X

It can accommodate a ten–abreast seating layout and has a typical 3-class capacity of 301 to 368 passengers, with a range of 5,240 to 8,555 nautical miles (9,700 to 15,840 km). It is recognizable for its large-diameter turbofan engines, six wheels on each main landing gear, fully circular fuselage cross-section,[6] and a blade-shaped tail cone.[7] It is the first Boeing aircraft with fly-by-wire controls. It initially competed with the Airbus A340 and the McDonnell Douglas MD-11, both now out of production, and as of 2021 competes with the Airbus A350 and A330-900.

The original 777 with a maximum takeoff weight (MTOW) of 545,000–660,000 lb (247–299 t) was produced in two fuselage lengths: the initial -200 was followed by the extended-range 777-200ER in 1997; and the 33.25 ft (10.13 m) longer 777-300 in 1998. Those 777 Classics were powered by 77,200–98,000 lbf (343–436 kN) General Electric GE90, Pratt & Whitney PW4000, or Rolls-Royce Trent 800 engines.[8] The longer-range 777-300ER, with a MTOW of 700,000–775,000 lb (318–352 t), entered service in 2004, the ultra long-range 777-200LR in 2006, and the 777F freighter in 2009. These long haul variants use 110,000–115,300 lbf (489–513 kN) GE90 engines and have extended raked wingtips. In November 2013, Boeing announced the 777X development with the -8 and -9 variants, both featuring composite wings with folding wingtips and General Electric GE9X engines.

The 777 has been ordered and delivered more than any other wide-body airliner; as of September 2022, more than 60 customers had placed orders for 2,136 aircraft of all variants, with 1,695 delivered. The most common and successful variant is the 777-300ER with 838 aircraft ordered and 832 delivered.[2] By March 2018, the 777 had become the most produced Boeing wide-body jet, overtaking the Boeing 747.[9] As of 2018, Emirates was the largest operator, with 163 aircraft.[10] As of September 2021, the 777 had been involved in 31 aviation accidents and incidents,[11] including 8 hull losses (5 during flight and 3 on the ground) with 541 fatalities, and 3 hijackings.[12][13]

Development

Background

The Boeing 777-100 trijet concept

In the early 1970s, the Boeing 747, McDonnell Douglas DC-10, and the Lockheed L-1011 TriStar became the first generation of wide-body passenger airliners to enter service.[14] In 1978, Boeing unveiled three new models: the twin-engine Boeing 757 to replace its 727, the twin-engine 767 to challenge the Airbus A300, and a trijet 777 concept to compete with the DC-10 and L-1011.[15][16][17] The mid-size 757 and 767 launched to market success, due in part to 1980s' extended-range twin-engine operational performance standards (ETOPS) regulations governing transoceanic twinjet operations.[18] These regulations allowed twin-engine airliners to make ocean crossings at up to three hours' distance from emergency diversionary airports.[19] Under ETOPS rules, airlines began operating the 767 on long-distance overseas routes that did not require the capacity of larger airliners.[18] The trijet 777 was later dropped, following marketing studies that favored the 757 and 767 variants.[20] Boeing was left with a size and range gap in its product line between the 767-300ER and the 747-400.[21]

By the late 1980s, DC-10 and L-1011 models were approaching retirement age, prompting manufacturers to develop replacement designs.[22] McDonnell Douglas was working on the MD-11, a stretched and upgraded successor of the DC-10,[22] while Airbus was developing its A330 and A340 series.[22] In 1986, Boeing unveiled proposals for an enlarged 767, tentatively named 767-X,[23] to target the replacement market for first-generation wide-bodies such as the DC-10,[19] and to complement existing 767 and 747 models in the company lineup.[24] The initial proposal featured a longer fuselage and larger wings than the existing 767,[23] along with winglets.[25] Later plans expanded the fuselage cross-section but retained the existing 767 flight deck, nose, and other elements.[23]

Airline customers were uninterested in the 767-X proposals, and instead wanted an even wider fuselage cross-section, fully flexible interior configurations, short- to intercontinental-range capability, and an operating cost lower than that of any 767 stretch.[19] Airline planners' requirements for larger aircraft had become increasingly specific, adding to the heightened competition among aircraft manufacturers.[22] By 1988, Boeing realized that the only answer was a new clean-sheet design, which became the 777 twin-jet.[26] The company opted for the twin-engine configuration given past design successes, projected engine developments, and reduced-cost benefits.[27] On December 8, 1989, Boeing began issuing offers to airlines for the 777.[23]

Design effort

The two-crew glass cockpit uses fly-by-wire controls

Alan Mulally served as the Boeing 777 program's director of engineering, and then was promoted in September 1992 to lead it as vice-president and general manager.[28][29] The design phase for the new twinjet was different from Boeing's previous commercial jetliners. For the first time, eight major airlines – All Nippon Airways, American Airlines, British Airways, Cathay Pacific, Delta Air Lines, Japan Airlines, Qantas, and United Airlines – had a role in the development.[30] This was a departure from industry practice, where manufacturers typically designed aircraft with minimal customer input.[31] The eight airlines that contributed to the design process became known within Boeing as the "Working Together" group.[30] At the first group meeting in January 1990, a 23-page questionnaire was distributed to the airlines, asking what each wanted in the design.[19] By March 1990, Boeing and the airlines had decided upon a basic design configuration: a cabin cross-section close to the 747's, capacity up to 325 passengers, flexible interiors, a glass cockpit, fly-by-wire controls, and 10 percent better seat-mile costs than the A330 and MD-11.[19] Boeing selected its Everett factory in Washington, home of 747 production, as the 777's final assembly site.[32]

On October 14, 1990, United Airlines became the 777's launch customer when it placed an order for 34 Pratt & Whitney-powered aircraft valued at US$11 billion with options on an additional 34.[33][34] The development phase coincided with United's replacement program for its aging DC-10s.[35] United required that the new aircraft be capable of flying three different routes: Chicago to Hawaii, Chicago to Europe, and non-stop from Denver, a hot and high airport, to Hawaii.[35] ETOPS certification was also a priority for United,[36] given the overwater portion of United's Hawaii routes.[33] In January 1993, a team of United developers joined other airline teams and Boeing designers at the Everett factory.[37] The 240 design teams, with up to 40 members each, addressed almost 1,500 design issues with individual aircraft components.[38] The fuselage diameter was increased to suit Cathay Pacific, the baseline model grew longer for All Nippon Airways, and British Airways' input led to added built-in testing and interior flexibility,[19] along with higher operating weight options.[39]

The 777 was the first commercial aircraft designed entirely by computer.[24][33][40] Each design drawing was created on a three-dimensional CAD software system known as CATIA, sourced from Dassault Systemes and IBM.[41] This lets engineers assemble a virtual aircraft, in simulation, to check for interference and verify that the thousands of parts fit properly—thus reducing costly rework.[42] Boeing developed its high-performance visualization system, FlyThru, later called IVT (Integrated Visualization Tool) to support large-scale collaborative engineering design reviews, production illustrations, and other uses of the CAD data outside of engineering.[43] Boeing was initially not convinced of CATIA's abilities and built a physical mock-up of the nose section to verify its results. The test was so successful that additional mock-ups were canceled.[44] The 777 "was completed with such precision that it was the first Boeing jet that didn't need its kinks worked out on an expensive physical mock-up plane", which contrasted sharply with the development of Boeing's next new airliner, the 787.[45] The program cost was US$5 billion.[46]

Into production and testing

The production process included substantial international content, an unprecedented level of global subcontracting for a Boeing jetliner,[47] later exceeded by the 787.[48] International contributors included Mitsubishi Heavy Industries and Kawasaki Heavy Industries (fuselage panels),[49] Fuji Heavy Industries, Ltd. (center wing section),[49] Hawker de Havilland (elevators), and Aerospace Technologies of Australia (rudder).[50] An agreement between Boeing and the Japan Aircraft Development Corporation, representing Japanese aerospace contractors, made the latter risk-sharing partners for 20 percent of the entire development program.[47] The initial 777-200 model was launched with propulsion options from three manufacturers, General Electric, Pratt & Whitney, and Rolls-Royce,[51] giving the airlines their choice of engines from competing firms.[52] Each manufacturer agreed to develop an engine in the 77,000 lbf (340 kN) and higher thrust class (a measure of jet engine output) for the world's largest twinjet.[51]

Pratt & Whitney PW4000
Rolls-Royce Trent 800
General Electric GE90-94B with its thrust reverser deployed

To accommodate production of its new airliner, Boeing doubled the size of the Everett factory at the cost of nearly US$1.5 billion[33] to provide space for two new assembly lines.[35] New production methods were developed, including a turn machine that could rotate fuselage subassemblies 180 degrees, giving workers access to upper body sections.[41] Major assembly of the first aircraft began on January 4, 1993.[53] By the start of production, the program had amassed 118 firm orders, with options for 95 more from 10 airlines.[54] Total investment in the program was estimated at over US$4 billion from Boeing, with an additional US$2 billion from suppliers.[55]

The 777 made its maiden flight on June 12, 1994.

On April 9, 1994, the first 777, number WA001, was rolled out in a series of 15 ceremonies held during the day to accommodate the 100,000 invited guests.[56] The first flight took place on June 12, 1994,[57] under the command of chief test pilot John E. Cashman.[58] This marked the start of an 11-month flight test program that was more extensive than testing for any previous Boeing model.[59] Nine aircraft fitted with General Electric, Pratt & Whitney, and Rolls-Royce engines[57] were flight tested at locations ranging from the desert airfield at Edwards Air Force Base in California[60] to frigid conditions in Alaska, mainly Fairbanks International Airport.[61] To satisfy ETOPS requirements, eight 180-minute single-engine test flights were performed.[62] The first aircraft built was used by Boeing's nondestructive testing campaign from 1994 to 1996, and provided data for the -200ER and -300 programs.[63] At the successful conclusion of flight testing, the 777 was awarded simultaneous airworthiness certification by the U.S. Federal Aviation Administration (FAA) and European Joint Aviation Authorities (JAA) on April 19, 1995.[57]

Entry into service

On May 15, 1995, United Airlines received the first Boeing 777-200 and made the first commercial flight on June 7

Boeing delivered the first 777 to United Airlines on May 15, 1995.[64][65] The FAA awarded 180-minute ETOPS clearance ("ETOPS-180") for the Pratt & Whitney PW4084-engined aircraft on May 30, 1995, making it the first airliner to carry an ETOPS-180 rating at its entry into service.[66] The first commercial flight took place on June 7, 1995, from London Heathrow Airport to Dulles International Airport near Washington, D.C.[67] Longer ETOPS clearance of 207 minutes was approved in October 1996.[68]

On November 12, 1995, Boeing delivered the first model with General Electric GE90-77B engines to British Airways,[69] which entered service five days later.[70] Initial service was affected by gearbox bearing wear issues, which caused British Airways to temporarily withdraw its 777 fleet from transatlantic service in 1997,[70] returning to full service later that year.[60] General Electric subsequently announced engine upgrades.[60]

The first Rolls-Royce Trent 877-powered aircraft was delivered to Thai Airways International on March 31, 1996,[69] completing the introduction of the three powerplants initially developed for the airliner.[71] Each engine-aircraft combination had secured ETOPS-180 certification from the point of entry into service.[72] By June 1997, orders for the 777 numbered 323 from 25 airlines, including satisfied launch customers that had ordered additional aircraft.[57] Operations performance data established the consistent capabilities of the twinjet over long-haul transoceanic routes, leading to additional sales.[73] By 1998, the 777 fleet had approached 900,000 flight hours.[74] Boeing states that the 777 fleet has a dispatch reliability (rate of departure from the gate with no more than 15 minutes delay due to technical issues) above 99 percent.[75][76][77][78]

Initial derivatives

Cathay Pacific introduced the stretched -300 variant on May 27, 1998

After the original model, Boeing developed an increased gross weight variant of the 777-200 with greater range and payload capability.[79] Initially named 777-200IGW,[80] the 777-200ER first flew on October 7, 1996,[81] received FAA and JAA certification on January 17, 1997,[82] and entered service with British Airways on February 9, 1997.[82] Offering greater long-haul performance, the variant became the most widely ordered version of the aircraft through the early 2000s.[79] On April 2, 1997, a Malaysia Airlines -200ER named "Super Ranger" broke the great circle "distance without landing" record for an airliner by flying eastward from Boeing Field, Seattle to Kuala Lumpur, a distance of 10,823 nautical miles (20,044 km; 12,455 mi), in 21 hours and 23 minutes.[74]

Following the introduction of the -200ER, Boeing turned its attention to a stretched version of the airliner. On October 16, 1997, the 777-300 made its first flight.[81] At 242.4 ft (73.9 m) in length, the -300 became the longest airliner yet produced (until the A340-600), and had a 20 percent greater overall capacity than the standard length model.[83] The -300 was awarded type certification simultaneously from the FAA and JAA on May 4, 1998,[84] and entered service with launch customer Cathay Pacific on May 27, 1998.[81][85]

The first generation of Boeing 777 models, the -200, -200ER, and -300 have since been known collectively as Boeing 777 Classics.[8]

Second generation models

The more powerful GE90 engine of later variants has a 128 in (330 cm) diameter fan up from 123 in (310 cm) in earlier variants, and curved blades instead of straight ones

From the program's start, Boeing had considered building ultra-long-range variants.[86] Early plans centered on a 777-100X proposal,[87] a shortened variant of the -200 with reduced weight and increased range,[87] similar to the 747SP.[88] However, the -100X would have carried fewer passengers than the -200 while having similar operating costs, leading to a higher cost per seat.[87][88] By the late 1990s, design plans shifted to longer-range versions of existing models.[87]

In March 1997, the Boeing board approved the 777-200X/300X specifications: 298 passengers in three classes over 8,600 nmi (15,900 km) for the 200X and 6,600 nmi (12,200 km) with 355 passengers in a tri-class layout for the 300X, with design freeze planned in May 1998, 200X certification in August 2000, and introduction in September and in January 2001 for the 300X.[89] The 1.37 m (4 ft 6 in) wider wing was to be strengthened and the fuel capacity enlarged, and it was to be powered by simple derivatives with similar fans.[89] GE was proposing a 454 kN (102,000 lbf) GE90-102B, while P&W offered its 436 kN (98,000 lbf) PW4098 and R-R was proposing a 437 kN (98,000 lbf) Trent 8100.[89] Rolls-Royce was also studying a Trent 8102 over 445 kN (100,000 lbf).[90] Boeing was studying a semi-levered, articulated main gear to help the take-off rotation of the proposed -300X, with its higher 324,600 kg (715,600 lb) MTOW.[91] By January 1999, its MTOW grew to 340,500 kg (750,000 lb), and thrust requirements increased to 110,000–114,000 lbf (490–510 kN).[92]

A more powerful engine in the thrust class of 100,000 lbf (440 kN) was required, leading to talks between Boeing and engine manufacturers. General Electric offered to develop the GE90-115B engine,[52] while Rolls-Royce proposed developing the Trent 8104 engine.[93] In 1999, Boeing announced an agreement with General Electric, beating out rival proposals.[52] Under the deal with General Electric, Boeing agreed to only offer GE90 engines on new 777 versions.[52]

On February 29, 2000, Boeing launched its next-generation twinjet program,[94] initially called 777-X,[86] and began issuing offers to airlines.[79] Development was slowed by an industry downturn during the early 2000s.[81] The first model to emerge from the program, the 777-300ER, was launched with an order for ten aircraft from Air France,[95] along with additional commitments.[79] On February 24, 2003, the -300ER made its first flight, and the FAA and EASA (European Aviation Safety Agency, successor to the JAA) certified the model on March 16, 2004.[96] The first delivery to Air France took place on April 29, 2004.[81] The -300ER, which combined the -300's added capacity with the -200ER's range, became the top-selling 777 variant in the late 2000s,[97] benefitting as airlines replaced comparable four-engine models with twinjets for their lower operating costs.[98]

The second long-range model, the 777-200LR, rolled out on February 15, 2005, and completed its first flight on March 8, 2005.[81] The -200LR was certified by both the FAA and EASA on February 2, 2006,[99] and the first delivery to Pakistan International Airlines occurred on February 26, 2006.[100] On November 10, 2005, the first -200LR set a record for the longest non-stop flight of a passenger airliner by flying 11,664 nautical miles (21,602 km) eastward from Hong Kong to London.[101] Lasting 22 hours and 42 minutes, the flight surpassed the -200LR's standard design range and was logged in the Guinness World Records.[102]

The production freighter model, the 777F, rolled out on May 23, 2008.[103] The maiden flight of the 777F, which used the structural design and engine specifications of the -200LR[104] along with fuel tanks derived from the -300ER, occurred on July 14, 2008.[105] FAA and EASA type certification for the freighter was received on February 6, 2009,[106] and the first delivery to launch customer Air France took place on February 19, 2009.[107][108]

Production developments

Initially second to the 747 as Boeing's most profitable jetliner,[109] the 777 became the company's most lucrative model in the 2000s.[110] Program sales accounted for an estimated US$400 million of Boeing's pretax earnings in 2000, US$50 million more than the 747.[109] By 2004, the airliner accounted for the bulk of wide-body revenues for Boeing Commercial Airplanes.[111] In 2007, orders for second-generation 777 models approached 350 aircraft,[112] and in November of that year, Boeing announced that all production slots were sold out to 2012.[98] The program backlog of 356 orders was valued at US$95 billion at list prices in 2008.[113]

In 2010, Boeing announced plans to increase production from 5 aircraft per month to 7 aircraft per month by mid-2011, and 8.3 per month by early 2013.[114] Complete assembly of each 777-300ER requires 49 days.[115] The smaller Boeing 787 Dreamliner, the first stage of a replacement aircraft initiative called the Boeing Yellowstone Project,[116] entered service in 2011. Reportedly, the 777 could eventually be replaced by a new aircraft family, Yellowstone 3, which would draw upon technologies from the 787.[112] In November 2011, assembly began on the 1,000th 777, a -300ER model for Emirates,[115] which was rolled out in March 2012.[117]

By the late 2000s, the 777 was facing increased potential competition from Airbus' planned A350 XWB and internally from proposed 787 variants,[112] both airliners that offer fuel efficiency improvements. As a consequence, the 777-300ER received an engine and aerodynamics improvement package for reduced drag and weight.[118] In 2010, the variant further received a 5,000 lb (2,300 kg) maximum zero-fuel weight increase, equivalent to a higher payload of 20–25 passengers; its GE90-115B1 engines received a 1–2.5 percent thrust enhancement for increased takeoff weights at higher-altitude airports.[118] More changes were targeted for late 2012, including possible extension of the wingspan,[118] along with other major changes, including a composite wing, new powerplant, and different fuselage lengths.[118][119][120] Emirates was reportedly working closely with Boeing on the project, in conjunction with being a potential launch customer for new 777 versions.[121] Among customers for the aircraft during this period, China Airlines ordered ten 777-300ER aircraft to replace 747-400s on long-haul transpacific routes (with the first of those aircraft entering service in 2015), noting that the 777-300ER's per seat cost is about 20% lower than the 747's costs (varying due to fuel prices).[122]

777X

The improved and updated Boeing 777-9X was rolled out on March 13, 2019

In November 2013, with orders and commitments totaling 259 aircraft from Lufthansa, Emirates, Qatar Airways, and Etihad Airways, Boeing formally launched the 777X program, the third generation of the 777 (not to be confused with the 777-X variants, the -200LR and -300ER, which are the second generation of the aircraft), with two models: the 777-8 and 777-9.[123] The 777-9 is a further stretched variant with a capacity of over 400 passengers and a range of over 8,200 nmi (15,200 km), whereas the 777-8 is slated to seat approximately 350 passengers and have a range of over 9,300 nmi (17,200 km).[123] Both models are to be equipped with new generation GE9X engines and feature new composite wings with folding wingtips. The first member of the 777X family, the 777-9, was projected to enter service in 2020 at the time of the program announcement. By the mid-2010s, the 777 had become prevalent on the longest flights internationally and had become the most widely used airliner for transpacific routes, with variants of the type operating over half of all scheduled flights and with the majority of transpacific carriers.[124][125]

By April 2014, with cumulative sales surpassing those of the 747, the 777 became the best-selling wide-body airliner; at existing production rates, the aircraft was on track to become the most-delivered wide-body airliner by mid-2016.[126] By February 2015, the backlog of undelivered 777s totaled 278 aircraft, representing just under three years of current production at 8.3 aircraft per month,[127] causing Boeing to ponder the 2018–2020 time frame. In January 2016, Boeing confirmed plans to reduce the production rate of the 777 family from 8.3 per month to 7 per month in 2017 to help close the production gap between the 777 and 777X created by a lack of new orders.[128] In 2018, assembling test 777-9 aircraft was expected to lower output to an effective rate of 5.5 per month.[129] Boeing was expected to drop 777 production to five per month in August 2017.[130]

Due to the impact of the COVID-19 pandemic on aviation, demand for new jets was reduced in 2020 and Boeing cut its monthly production from five to two 777s.[131]

Updates and improvements

Air France received the first 777-300ER on April 29, 2004

In tandem with the development of the third generation Boeing 777X, Boeing worked with General Electric to offer a 2% improvement in fuel efficiency to in-production 777-300ER aircraft. General Electric improved the fan module and the high-pressure compressor stage-1 blisk in the GE-90-115 turbofan, as well as reduced clearances between the tips of the turbine blades and the shroud during cruise. These improvements, of which the latter is the most important and was derived from work to develop the 787, were stated by GE to lower fuel burn by 0.5%. Boeing's wing modifications were intended to deliver the remainder. Boeing stated that every 1% improvement in the 777-300ER's fuel burn translates into being able to fly the aircraft another 75 nmi (139 km; 86 mi) on the same load of fuel, or add ten passengers or 2,400 lb (1,100 kg) of cargo to a "load limited" flight.[132]

In March 2015, additional details of the improvement package were unveiled. The 777-300ER was to shed 1,800 lb (820 kg) by replacing the fuselage crown with tie rods and composite integration panels, similar to those used on the 787. The new flight control software was to eliminate the need for the tail skid by keeping the tail off the runway surface regardless of the extent to which pilots command the elevators. Boeing was also redesigning the inboard flap fairings to reduce drag by reducing pressure on the underside of the wing. The outboard raked wingtip was to have a divergent trailing edge, described as a "poor man's airfoil" by Boeing; this was originally developed for the McDonnell Douglas MD-12 project. Another change involved elevator trim bias. These changes were to increase fuel efficiency and allow airlines to add 14 additional seats to the airplane, increasing per seat fuel efficiency by 5%.[133]

Mindful of the long time required to bring the 777X to the market, Boeing continued to develop improvement packages which improve fuel efficiency, as well as lower prices for the existing product. In January 2015, United Airlines ordered ten 777-300ERs, normally costing around US$150 million each but paid around US$130 million, a discount to bridge the production gap to the 777X.[134] The roll-out of the prototype 777X, a 777-9 model, occurred on March 13, 2019.[135]

In 2019, the -200ER unit cost was US$306.6 million, the -200LR: US$346.9 million, the -300ER: US$375.5 million and the 777F US$352.3 million.[136] The -200ER is the only Classic variant listed.

Design

The engines (Trent 800) and extended slats, flaps, and landing gear of an American Airlines Boeing 777-200ER.
Front view of an Emirates 777-300ER, showing fuselage profile, wing dihedral, and GE90 engines

Boeing introduced a number of advanced technologies with the 777 design, including fully digital fly-by-wire controls,[137] fully software-configurable avionics, Honeywell LCD glass cockpit flight displays,[138] and the first use of a fiber optic avionics network on a commercial airliner.[139] Boeing made use of work done on the cancelled Boeing 7J7 regional jet,[140] which utilized similar versions of the chosen technologies.[140] In 2003, Boeing began offering the option of cockpit electronic flight bag computer displays.[141] In 2013, Boeing announced that the upgraded 777X models would incorporate airframe, systems, and interior technologies from the 787.[142]

Fly-by-wire

In designing the 777 as its first fly-by-wire commercial aircraft, Boeing decided to retain conventional control yokes rather than change to sidestick controllers as used in many fly-by-wire fighter aircraft and in many Airbus airliners.[137] Along with traditional yoke and rudder controls, the cockpit features a simplified layout that retains similarities to previous Boeing models.[143] The fly-by-wire system also incorporates flight envelope protection, a system that guides pilot inputs within a computer-calculated framework of operating parameters, acting to prevent stalls, overspeeds, and excessively stressful maneuvers.[137] This system can be overridden by the pilot if deemed necessary.[137] The fly-by-wire system is supplemented by mechanical backup.[144]

Airframe and systems

The planform view of a Boeing 777-300ER, with raked wingtips

The wings on the 777 feature a supercritical airfoil design that is swept back at 31.6 degrees and optimized for cruising at Mach 0.83 (revised after flight tests up to Mach 0.84).[145] The wings are designed with increased thickness and a longer span than previous airliners, resulting in greater payload and range, improved takeoff performance, and a higher cruising altitude.[57] The wings also serve as fuel storage, with longer-range models able to carry up to 47,890 US gallons (181,300 L) of fuel.[146] This capacity allows the 777-200LR to operate ultra-long-distance, trans-polar routes such as Toronto to Hong Kong.[147] In 2013, a new wing made of composite materials was introduced for the upgraded 777X, with a wider span and design features based on the 787's wings.[142]

Folding wingtips, 21 feet (6.40 m) long, were offered when the 777 was first launched, to appeal to airlines who might use gates made to accommodate smaller aircraft, but no airline purchased this option.[148] Folding wingtips reemerged as a design feature at the announcement of the upgraded 777X in 2013. Smaller folding wingtips of 11 feet (3.35 m) in length will allow 777X models to use the same airport gates and taxiways as earlier 777s.[142] These smaller folding wingtips are less complex than those proposed for earlier 777s, and internally only affect the wiring needed for wingtip lights.[142]

The six-wheel undercarriage of a Boeing 777

The airframe incorporates the use of composite materials, which comprise nine percent of its original structural weight (all models outside the 777-8 and 777-9).[149] Elements made from composite material include the cabin floor and rudder. The main fuselage cross-section is circular[150] and tapers rearward into a blade-shaped tail cone with a port-facing auxiliary power unit.[7] The aircraft also features the largest landing gear and the biggest tires ever used in a commercial jetliner.[151] The six-wheel bogies are designed to spread the load of the aircraft over a wide area without requiring an additional centerline gear. This helps reduce weight and simplifies the aircraft's braking and hydraulic systems. Each tire of a 777-300ER six-wheel main landing gear can carry a load of 59,490 lb (26,980 kg), which is heavier than other wide-bodies such as the 747-400.[152] The aircraft has triple redundant hydraulic systems with only one system required for landing.[153] A ram air turbine—a small retractable device which can provide emergency power—is also fitted in the wing root fairing.[154]

Interior

The Economy cabin of an Etihad Airways Boeing 777-300ER in a 3–3–3 layout.
The Royal Laurel Class (Business Class) cabin in a 1–2–1 reverse herringbone layout on an EVA Air 777-300ER

The original 777 interior, also known as the Boeing Signature Interior, features curved panels, larger overhead bins, and indirect lighting.[70] Seating options range from four[155] to six–abreast in first class up to ten–abreast in economy.[156] The 777's windows were the largest of any current commercial airliner until the 787, and measure 15-inch (380 mm) by 10-inch (250 mm) in size (all models outside the 777-8 and -9).[157] The cabin also features "Flexibility Zones", which entails deliberate placement of water, electrical, pneumatic, and other connection points throughout the interior space, allowing airlines to move seats, galleys, and lavatories quickly and more easily when adjusting cabin arrangements.[156] Several aircraft have also been fitted with VIP interiors for non-airline use.[158] Boeing designed a hydraulically damped toilet seat cover hinge that closes slowly.[159]

In 2003, Boeing introduced overhead crew rests as an option on the 777.[160] Located above the main cabin and connected via staircases, the forward flight crew rest contains two seats and two bunks, while the aft cabin crew rest features multiple bunks.[160] The Signature Interior has since been adapted for other Boeing wide-body and narrow-body aircraft, including 737NG, 747-400, 757-300, and newer 767 models, including all 767-400ER models.[161][162] The 747-8 and 767-400ER have also adopted the larger, more rounded windows of the original 777.

In 2011, Flight International reported that Boeing is considering replacing the Signature Interior on the 777 with a new interior similar to that on the 787, as part of a move towards a "common cabin experience" across all Boeing platforms.[163] With the launch of the 777X in 2013, Boeing confirmed that the aircraft would be receiving a new interior featuring 787 cabin elements and larger windows.[142] Further details released in 2014 included re-sculpted cabin sidewalls for greater interior room, noise-dampening technology, and higher cabin humidity.[164]

Air France has a 777-300ER sub-fleet with 472 seats each, more than any other international 777, to achieve a cost per available seat kilometer (CASK) around €.05, similar to Level's 314-seat Airbus A330-200, its benchmark for low-cost, long-haul.[165] Competing on similar French overseas departments destinations, Air Caraïbes has 389 seats on the A350-900 and 429 on the -1000.[165] French Bee's is even more dense with its 411 seats A350-900, due to 10-abreast economy seating, reaching a €.04 CASK according to Air France, and lower again with its 480 seats on the -1000.[165]

Variants

Boeing uses two characteristics – fuselage length and range – to define its 777 models.[21][166] Passengers and cargo capacity varies by fuselage length: the 777-300 has a stretched fuselage compared to the base 777-200. Three range categories were defined: the A-market would cover domestic and regional operations, the B-market would cover routes from Europe to the US West coast and the C-market the longest transpacific routes.[167] The A-market would be covered by a 4,200 nmi (7,800 km) range, 234 t (516,000 lb) MTOW aircraft for 353 to 374 passengers powered by 316 kN (71,000 lbf) engines, followed by a 6,600 nmi (12,200 km) B-market range for 286 passengers in three-class, with 365 kN (82,000 lbf) unit thrust and 263 t (580,000 lb) of MTOW, an A340 competitor, basis of an A-market 409 to 434 passengers stretch, and eventually a 7,600 nmi (14,000 km) C-market with 400 kN (90,000 lbf) engines.[168]

When referring to different variants, the International Air Transport Association (IATA) code collapses the 777 model designator and the -200 or -300 variant designator to "772" or "773".[169] The International Civil Aviation Organization (ICAO) aircraft type designator system adds a preceding manufacturer letter, in this case "B" for Boeing, hence "B772" or "B773".[170] Designations may append a range identifier like "B77W" for the 777-300ER by the ICAO,[170] "77W" for the IATA,[169] though the -200ER is a company marketing designation and not certificated as such. Other notations include "773ER"[171] and "773B" for the -300ER.[172]

777-200

A 777-200 of United Airlines, its launch operator

The initial 777-200 made its maiden flight on June 12, 1994, and was first delivered to United Airlines on May 15, 1995.[81] With a 545,000 lb (247 t) MTOW and 77,000 lbf (340 kN) engines, it has a range of 5,240 nautical miles (9,700 km) with 305 passengers in a three-class configuration.[173] The -200 was primarily aimed at U.S. domestic airlines,[21] although several Asian carriers and British Airways have also operated the type. Nine different -200 customers have taken delivery of 88 aircraft,[2] with 55 in airline service as of 2018.[10] The competing Airbus aircraft was the A330-300.[174]

In 2016, United Airlines shifted operations with all 19 of its -200s to exclusively domestic U.S. routes, including flights to and from Hawaii, and added more economy class seats by shifting to a ten-abreast configuration (a pattern that matched American Airlines' reconfiguration of the type).[175][176] As of 2019, Boeing no longer markets the -200, as indicated by its removal from the manufacturer's price listings for 777 variants.[136]

777-200ER

A 777-200ER of British Airways, its launch operator

The B-market 777-200ER ("ER" for Extended Range), originally known as the 777-200IGW (increased gross weight), has additional fuel capacity and an increased MTOW enabling transoceanic routes.[80] With a 658,000 lb (298 t) MTOW and 93,700 lbf (417 kN) engines, it has a 7,065 nmi (13,084 km) range.[177] It was delivered first to British Airways on February 6, 1997.[81] Thirty-three customers received 422 deliveries, with no unfilled orders as of 2019.[2]

As of 2018, 338 examples of the -200ER are in airline service.[10] It competed with the A340-300.[178] Boeing proposes the 787-10 to replace it.[179] The value of a new -200ER rose from US$110 million at service entry to US$130 million in 2007; a 2007 model 777 was selling for US$30 million ten years later, while the oldest ones had a value around US$5–6 million, depending on the remaining engine time.[180]

The engine can be delivered de-rated with reduced engine thrust for shorter routes to lower the MTOW, reduce purchase price and landing fees (as 777-200 specifications) but can be re-rated to full standard.[181] Singapore Airlines ordered over half of its -200ERs de-rated.[181][182]

777-200LR

A Boeing 777-200LR in the livery of its first operator, Pakistan International Airlines.

The 777-200LR ("LR" for Long Range), the C-market model, entered service in 2006 as one of the longest-range commercial airliners.[183][184] Boeing nicknamed it Worldliner as it can connect almost any two airports in the world,[101] although it is still subject to ETOPS restrictions.[185] It holds the world record for the longest nonstop flight by a commercial airliner.[101] It has a maximum design range of 8,555 nautical miles (15,844 km) as of 2017.[177] The -200LR was intended for ultra long-haul routes such as Los Angeles to Singapore.[86]

Developed alongside the -300ER, the -200LR features an increased MTOW and three optional auxiliary fuel tanks in the rear cargo hold.[183] Other new features include extended raked wingtips, redesigned main landing gear, and additional structural strengthening.[183] As with the -300ER and 777F, the -200LR is equipped with wingtip extensions of 12.8 ft (3.90 m).[183] The -200LR is powered by GE90-110B1 or GE90-115B turbofans.[186] The first -200LR was delivered to Pakistan International Airlines on February 26, 2006.[100][187] Twelve different -200LR customers took delivery of 61 aircraft.[188] Airlines operated 50 of the -200LR variant as of 2018.[10] Emirates is the largest operator of the LR variant with 10 aircraft.[189] The closest competing aircraft from Airbus are the discontinued A340-500HGW[183] and the current A350-900ULR.[190]

777-300

A 777-300 of Cathay Pacific, its launch operator.

Launched at the Paris Air Show on June 26, 1995, its major assembly started in March 1997 and its body was joined on July 21, it was rolled-out on September 8 and made its first flight on October 16.[191] The 777 was designed to be stretched by 20%: 60 extra seats to almost 370 in tri-class, 75 more to 451 in two classes, or up to 550 in all-economy like the 747SR. The 33 ft (10.1 m) stretch is done with 17 ft (5.3 m) in ten frames forward and 16 ft (4.8 m) in nine frames aft for a 242 ft (73.8 m) length, 11 ft (3.4 m) longer than the 747-400. It uses the -200ER 45,200 US gal (171,200 L) fuel capacity and 84,000–98,000 lbf (374–436 kN) engines with a 580,000 to 661,000 lb (263.3 to 299.6 t) MTOW.[191]

It has ground maneuvering cameras for taxiing and a tailskid to rotate, while the proposed 716,000 lb (324.6 t) MTOW -300X would have needed a semi-levered main gear. Its overwing fuselage section 44 was strengthened, with its skin thickness going from the -200's 6.3 to 11.4 mm (0.25 to 0.45 in), and received a new evacuation door pair. Its operating empty weight with Rolls-Royce engines in typical tri-class layout is 343,300 lb (155.72 t) compared to 307,300 lb (139.38 t) for a similarly configured -200.[191] Boeing wanted to deliver 170 -300s by 2006 and to produce 28 per year by 2002, to replace early Boeing 747s, burning one-third less fuel with 40% lower maintenance costs.[191]

With a 660,000 lb (299 t) MTOW and 90,000 lbf (400 kN) engines, it has a range of 6,005 nautical miles (11,121 km) with 368 passengers in three-class.[173] Eight different customers have taken delivery of 60 aircraft of the variant, of which 18 were powered by the PW4000 and 42 by the RR Trent 800 (none were ordered with the GE90, which was never certified on this variant[192]),[2] with 48 in airline service as of 2018.[10] The last -300 was delivered in 2006 while the longer-range -300ER started deliveries in 2004.[2]

777-300ER

A 777-300ER in the livery of Air France, the launch operator of the best-selling variant

The 777-300ER ("ER" for Extended Range) is the B-market version of the -300. Its higher MTOW and increased fuel capacity permits a maximum range of 7,370 nautical miles (13,650 km) with 396 passengers in a two-class seating arrangement.[177] The 777-300ER features raked and extended wingtips, a strengthened fuselage and wings and a modified main landing gear.[193] Its wings have an aspect ratio of 9.0.[194] It is powered by the GE90-115B turbofan, the world's most powerful jet engine with a maximum thrust of 115,300 lbf (513 kN).[195]

Following flight testing, aerodynamic refinements have reduced fuel burn by an additional 1.4%.[97][196] At Mach 0.839 (495 kn; 916 km/h), FL300, -59 °C and at a 513,400 lb (232.9 t) weight, it burns 17,300 lb (7.8 t) of fuel per hour. Its operating empty weight is 371,600 lb (168.6 t).[197] The projected operational empty weight is 168,560 kg (371,610 lb) in airline configuration, at a weight of 216,370 kg (477,010 lb) and FL350, total fuel flow is 6,790 kg/h (14,960 lb/h) at M0.84/472 kn (874 km/h), rising to 8,890 kg (19,600 lb)/h at M0.87/506 kn (937 km/h).[198]

Since its launch, the -300ER has been a primary driver of the twinjet's sales past the rival A330/340 series.[199] Its direct competitors have included the Airbus A340-600 and the A350-1000.[112] Using two engines produces a typical operating cost advantage of around 8–9% for the -300ER over the A340-600.[200] Several airlines have acquired the -300ER as a 747-400 replacement amid rising fuel prices given its 20% fuel burn advantage.[98] The -300ER has an operating cost of US$44 per seat hour, compared to an Airbus A380's roughly US$50 per seat hour (hourly cost is about US$26,000), and US$90 per seat hour for a Boeing 747-400 as of 2015.[201]

The first 777-300ER was delivered to Air France on April 29, 2004.[202] The -300ER is the best-selling 777 variant, having surpassed the -200ER in orders in 2010 and deliveries in 2013.[2] As of 2018, 784 Boeing 777-300ERs were in service.[10] As of 2019, -300ER deliveries to 45 different customers totalled 810, with 34 unfilled orders.[2] At its peak, a new 777-300ER was valued US$150 million, falling to US$17 million in 2019.[203]

777 Freighter

A 777F of FedEx Express, the largest operator.

The 777 Freighter (777F) is an all-cargo version of the twinjet, and shares features with the -200LR; these include its airframe, engines,[204] and fuel capacity.[146] With a maximum payload of 228,700 lb (103,700 kg) (similar to the 243,000 lb (110,000 kg) of the Boeing 747-200F), it has a maximum range of 9,750 nmi (18,057 km) or 4,970 nmi (9,200 km) at its max structural payload.[205]

The 777F also features a new supernumerary area, which includes four business-class seats forward of the rigid cargo barrier, full main deck access, bunks, and a galley.[206] As the aircraft promises improved operating economics compared to older freighters,[98] airlines have viewed the 777F as a replacement for freighters such as the Boeing 747-200F, McDonnell Douglas DC-10, and McDonnell Douglas MD-11F.[104][207]

The first 777F was delivered to Air France on February 19, 2009.[107] As of April 2021, 247 freighters have been ordered by 25 different customers with 45 unfilled orders.[2] Operators had 202 of the 777F in service as of 2018.[10]

In the 2000s, Boeing began studying the conversion of 777-200ER and -200 passenger airliners into freighters, under the name 777 BCF (Boeing Converted Freighter).[208] The company has been in discussion with several airline customers, including FedEx Express, UPS Airlines, and GE Capital Aviation Services, to provide launch orders for a 777 BCF program.[209]

777-300ER Special Freighter (SF)

In July 2018, Boeing was studying a 777-300ER freighter conversion, targeted for the volumetric market instead of the density market served by the 777F.[210] After having considered a -200ER P2F program, Boeing was hoping to conclude its study by the Fall as the 777X replacing aging -300ERs from 2020 will generate feedstock.[210] New-build 777-300ER may maintain the delivery rate at five per month, to bridge the production gap until the 777X is delivered.[211] Within the 811 777-300ERs delivered and 33 to be delivered by October 2019, GE Capital Aviation Services (GECAS) anticipates up to 150-175 orders through 2030, the four to five months conversion costing around $35m.[212]

In October 2019, Boeing and Israeli Aerospace Industries (IAI) launched the 777-300ERSF passenger to freighter conversion program with GECAS ordering 15 aircraft and 15 options, the first aftermarket 777 freighter conversion program.[212] In June 2020, IAI received the first 777-300ER to be converted, from GECAS.[213] In October 2020, GECAS announced the launch operator from 2023: Michigan-based Kalitta Air, already operating 24 747-400Fs, nine 767-300ERFs and three 777-200LRFs.[213] IAI should receive the first aircraft in December 2020 while certification and service entry was scheduled for late 2022.[212]

The converted aircraft has a maximum payload of 224,000 lb (101.6 t), a range of 4,500 nmi (8,300 km) and shares the door aperture and aft position of the 777F.[212] It has a cargo volume capacity of 28,900 cu ft (819 m3), 5,800 cb ft (164 m³) greater than the 777F (or 25% more) and can hold 47 standard 96 x 125 in pallet (P6P) positions, 10 more positions than a 777-200LRF or eight more than a 747-400F.[212] With windows plugged, passenger doors deactivated, fuselage and floor reinforced, and a main-deck cargo door installed, the 777-300ERSF has 15% more volume than a 747-400BCF.[213]

777X

Unveiling of the first 777-9 on March 13, 2019.

The 777X is to feature new GE9X engines and new composite wings with folding wingtips.[123] It was launched in November 2013 with two variants: the 777-8 and the 777-9.[123] The 777-8 provides seating for 384 passengers and has a range of 8,730 nmi (16,170 km) while the 777-9 has seating for 426 passengers and a range of over 7,285 nmi (13,500 km).[214]

The 777-9 first flew on January 25, 2020, with deliveries initially forecast for 2022 and later delayed to 2023.[214][215][216] A longer 777-10X, 777X Freighter, and 777X BBJ variants have also been proposed.[217]

Government and corporate

A Presidential Flight of United Arab Emirates government 777-200ER.
A Japan Air Self-Defense Force 777-300ER operating as Japanese Air Force One.

Versions of the 777 have been acquired by government and private customers. The main purpose has been for VIP transport, including as an air transport for heads of state, although the aircraft has also been proposed for other military applications.

  • 777 Business Jet (777 VIP) – the Boeing Business Jet version of the 777 that is sold to corporate customers. Boeing has received orders for 777 VIP aircraft based on the 777-200LR and 777-300ER passenger models.[218][219] The aircraft are fitted with private jet cabins by third party contractors,[218] and completion may take 3 years.[220]
  • 777 Tanker (KC-777) – the KC-777 is a proposed tanker version of the 777. In September 2006, Boeing announced that it would produce the KC-777 if the United States Air Force (USAF) required a larger tanker than the KC-767, able to transport more cargo or personnel.[221][222][223] In April 2007, Boeing offered its 767-based KC-767 Advanced Tanker instead of the KC-777 to replace the smaller Boeing KC-135 Stratotanker under the USAF's KC-X program.[224] Boeing officials have described the KC-777 as suitable for the related KC-Z program to replace the wide-body McDonnell Douglas KC-10 Extender.[225]
  • In 2014, the Japanese government chose to procure two 777-300ERs to serve as the official air transport for the Emperor of Japan and Prime Minister of Japan.[226] The aircraft, operated by the Japan Air Self-Defense Force under the callsign Japanese Air Force One, entered service in 2019 and replaced two 747-400s - the 777-300ER was specifically selected by the Ministry of Defense owing to its similar capabilities to the preceding 747 pair.[227] Besides VIP transport, the 777s are also intended for use in emergency relief missions.[226]
An Air India One 777-300ER
  • 777s are serving or have served as official government transports for nations including Gabon (VIP-configured 777-200ER),[228] Turkmenistan (VIP-configured 777-200LR)[229] and the United Arab Emirates (VIP-configured 777-200ER and 777-300ER operated by Abu Dhabi Amiri Flight).[219] Prior to returning to power as Prime Minister of Lebanon, Rafic Hariri acquired a 777-200ER as an official transport.[230] India's government purchased two Air India 777-300ERs and converted them for VVIP transport; they entered service in 2021 replacing its 747s.[231][232]
  • In 2014, the USAF examined the possibility of adopting modified 777-300ERs or 777-9Xs to replace the Boeing 747-200 aircraft used as Air Force One.[233] Although the USAF had preferred a four-engine aircraft, this was mainly due to precedent (existing aircraft were purchased when the 767 was just beginning to prove itself with ETOPS; decades later, the 777 and other twin jets established a comparable level of performance to quad-jet aircraft).[233] Ultimately, the air force decided against the 777, and selected the Boeing 747-8 to become the next presidential aircraft.[234]

Operators

A row of Boeing 777-300s and -300ERs at Dubai International Airport operated by Emirates, the largest 777 customer.
A Philippine Airlines Boeing 777-300ER on final approach to London-Heathrow Airport.

Boeing customers that have received the most 777s are Emirates, Singapore Airlines, United Airlines, ILFC, and American Airlines.[2] Emirates is the largest airline operator as of 2018,[10] and is the only customer to have operated all 777 variants produced, including the -200, -200ER, -200LR, -300, -300ER, and 777F.[2][235] The 1,000th 777 off the production line, a -300ER set to be Emirates' 102nd 777, was unveiled at a factory ceremony in March 2012.[117]

A total of 1,416 aircraft (all variants) were in airline service as of 2018, with Emirates (163), United Airlines (91), Air France (70), Cathay Pacific (69), American Airlines (67), Qatar Airways (67), British Airways (58), Korean Air (53), All Nippon Airways (50), Singapore Airlines (46), and other operators with fewer aircraft of the type.[10]

In 2017, 777 Classics are reaching the end of their mainline service: with a -200 age ranging from three to 22 years, 43 Classic 777s or 7.5% of the fleet have been retired. Values of 777-200ERs have declined by 45% since January 2014, faster than Airbus A330s and Boeing 767s with 30%, due to the lack of a major secondary market but only a few budget, air charters and ACMI operators. In 2015, Richard H. Anderson, then Delta Air Lines' chairman and chief executive, said he had been offered 777-200s for less than US$10 million.[8] To keep them cost-efficient, operators densify their 777s for about US$10 million each, like Scoot with 402 seats in its dual-class -200s, or Cathay Pacific which switched the 3–3–3 economy layout of 777-300s to 3–4–3 to seat 396 on regional services.[8]

Orders and deliveries

The 777 surpassed 2,000 orders by the end of 2018.[236]

Boeing 777 orders and deliveries by type[2]
Total ordersTotal deliveriesUnfilled
777-2008888
777-200ER422422
777-200LR6161
777-3006060
777-300ER8388326
777F31423282
777X353353
Total2,1361,695441

Orders and deliveries through September 2022[1][2]

Boeing 777 orders[2] and deliveries[3] by year
90−941995199619971998199920002001200220032004200520062007200820092010201120122013201420152016201720182019202020212022Total
Orders 1121016854683511630321342153761103930751947512127758235351-31053632,136
Deliveries −20013321110393123188
−200ER485063425541292213231934334422
−200LR2101116961131161
−3001417436924160
−300ER10203953475240526079837988653219473832
777F162215191413191191625221615232
777X
All133259748355614739364065836188747383989998997448452624181,695

Orders through September 30, 2022[1][2] and deliveries[3]

Boeing 777 orders and deliveries (cumulative, by year):

Orders

Deliveries

Orders[1][2] and deliveries[3] through September 30, 2022

Aircraft on display

Boeing 777-200 prototype on display at the Pima Air & Space Museum
  • The first prototype Boeing 777-200, B-HNL[237] (ex. N7771), was retired in mid-2018 amid press reports that it was to be displayed at the Museum of Flight in Seattle, although the museum subsequently denied the reports.[238] On September 18, 2018, Cathay Pacific and Boeing announced that B-HNL would be donated to the Pima Air & Space Museum near Tucson, Arizona, where it would be placed on permanent display.[239] This aircraft, which had previously been in regular use by Cathay Pacific between 2000 and 2018, was manufactured in 1994 and was delivered to the airline after spending six years with Boeing.[240][241]
  • The forward fuselage section and cockpit of a former Korean Air Boeing 777-200ER, HL7531,[242] has been installed at the Dongwon Institute of Science and Technology as an educational facility for students that are training in aerospace fields. The flight deck and portions of the first class and economy class cabins have been retained, whereas the forward cargo hold has been converted into a meeting area. The installation was completed in October 2022.[243]

Accidents and incidents

A laboratory replication of ice crystals clogging the fuel-oil heat exchanger on a Rolls-Royce Trent 800 engine, from the Air Accidents Investigation Branch (AAIB) report on the British Airways Flight 38 (BA38) and Delta Air Lines Flight 18 (DL18) incidents.[244][245]

As of August 2022, the 777 had been involved in 31 aviation accidents and incidents,[11] including a total of eight hull losses (five in-flight and three on-ground incidents), resulting in 541 fatalities along with three hijackings.[12][13] The first fatality involving the twinjet occurred in a fire while an aircraft was being refueled at Denver International Airport in the United States on September 5, 2001, during which a ground worker sustained fatal burns.[246] The aircraft, operated by British Airways, sustained fire damage to the lower wing panels and engine housing; it was later repaired and returned to service.[246][247]

The first hull loss occurred on January 17, 2008, when a 777-200ER with Rolls-Royce Trent 895 engines, flying from Beijing to London as British Airways Flight 38, crash-landed approximately 1,000 feet (300 m) short of Heathrow Airport's runway 27L and slid onto the runway's threshold. There were 47 injuries and no fatalities. The impact severely damaged the landing gear, wing roots and engines.[248][249] The accident was attributed to ice crystals suspended in the aircraft's fuel clogging the fuel-oil heat exchanger (FOHE).[245][250] Two other minor momentary losses of thrust with Trent 895 engines occurred later in 2008.[251][244] Investigators found these were also caused by ice in the fuel clogging the FOHE. As a result, the heat exchanger was redesigned.[245][252]

The second hull loss occurred on July 29, 2011, when a 777-200ER scheduled to operate as EgyptAir Flight 667 suffered a cockpit fire while parked at the gate at Cairo International Airport before its departure.[253] The aircraft was evacuated with no injuries,[253] and airport fire teams extinguished the fire.[254] The aircraft sustained structural, heat and smoke damage, and was written off.[253][254] Investigators focused on a possible short circuit between an electrical cable and a supply hose in the cockpit crew oxygen system.[253]

The third hull loss occurred on July 6, 2013, when a 777-200ER, operating as Asiana Airlines Flight 214, crashed while landing at San Francisco International Airport after touching down short of the runway. The 307 surviving passengers and crew on board evacuated before fire destroyed the aircraft. Two passengers, who had not been wearing their seatbelts, were ejected from the aircraft during the crash and were killed.[255] A third passenger died six days later as a result of injuries sustained during the crash.[256] These were the first fatalities in a crash involving a 777 since its entry into service in 1995.[257][256][258] The official accident investigation concluded in June 2014 that the pilots committed 20 to 30 minor to significant errors in their final approach. Deficiencies in Asiana Airlines' pilot training and in Boeing's documentation of complex flight control systems were also cited as contributory factors.[259][260][261]

The probable fourth hull loss occurred on March 8, 2014, when a 777-200ER carrying 227 passengers and 12 crew, en route from Kuala Lumpur to Beijing as Malaysia Airlines Flight 370, was reported missing. Air Traffic Control's last reported coordinates for the aircraft were over the South China Sea.[262][263] After the search for the aircraft began, Malaysia's prime minister announced on March 24, 2014, that after analysis of new satellite data it was now to be assumed "beyond reasonable doubt" that the aircraft had crashed in the Indian Ocean and there were no survivors.[264][265] The cause remains unknown, but the Malaysian Government in January 2015, declared it an accident.[266][267] US officials believe the most likely explanation to be that someone in the cockpit of Flight 370 re-programmed the aircraft's autopilot to travel south across the Indian Ocean.[268][269] On July 29, 2015, an item later identified as a flaperon strongly suspected to be from the missing aircraft was found on the island of Réunion in the western Indian Ocean.[270]

The fifth hull loss occurred on July 17, 2014, when a 777-200ER, bound for Kuala Lumpur from Amsterdam as Malaysia Airlines Flight 17 (MH17), broke up in mid-air and crashed after being hit by an anti-aircraft missile.[271] All 298 people (283 passengers and 15 crew) on board were killed, making this the deadliest crash involving the Boeing 777.[272] The incident was linked to the ongoing Donbass insurgency in the region.[273][274] On the basis of the Dutch Safety Board and the Joint Investigation Team official conclusions of May 2018, the governments of the Netherlands and Australia hold Russia responsible for the deployment of the Buk missile system used in shooting down the airliner from territory held by pro-Russian separatists.[275]

The sixth hull loss occurred on August 3, 2016, when a 777-300 crashed while landing and caught fire at Dubai Airport at the end of its flight as Emirates Flight 521.[276] The preliminary investigation indicated that the aircraft was attempting a landing during active wind shear conditions. The pilots initiated a go-around procedure shortly after the wheels touched-down onto the runway, however, the aircraft settled back onto the ground apparently due to late throttle application. As the undercarriage was in the process of being retracted, the aircraft landed on its rear underbody and engine nacelles, resulting in the separation of one engine, loss of control and subsequent crash.[277] There were no passenger casualties of the 300 people on board, however, one airport fireman was killed fighting the fire. The aircraft's fuselage and right wing were irreparably damaged by the fire.[276][278]

The seventh hull loss occurred on November 29, 2017, when a Singapore Airlines 777-200ER experienced a fire while being towed at Singapore Changi Airport. An aircraft technician was the only occupant on board and evacuated safely. The aircraft sustained heat damage and was written off.[279] The eighth hull loss occurred on July 22, 2020, when a 777F of Ethiopian Airlines experienced a fire while at the cargo area of Shanghai Pudong International Airport. The aircraft sustained heat damage and was written off.[280][281]

On February 20, 2021, a 777-200 operating as United Airlines Flight 328 suffered a failure of its starboard engine. The cowling and other engine parts fell over a Denver suburb. The captain declared an emergency and returned to land at the Denver airport.[282] An immediate examination, before any formal investigation, found that two fan blades had broken off. One blade had suffered metal fatigue and may have chipped another blade, which also broke off.[283] Boeing recommended suspending flights of all 128 operational 777s equipped with Pratt & Whitney PW4000 engines until they had been inspected. Several countries also restricted flights of PW4000-equipped 777s in their territory.[283] In 2018, there had been a similar issue on United Airlines Flight 1175 from San Francisco to Hawaii, involving another 777-200 equipped with the same engine type.[284]

Specifications

Boeing 777 specifications
Variants Initial[186] Long-range[146]
Model 777-200/200ER 777-300 777-300ER 777-200LR/777F
Crew Two (cockpit)
3-class seats[173] 305 (24F/54J/227Y) 368 (30F/84J/254Y) 365 (22F/70J/273Y) 301 (16F/58J/227Y)[lower-alpha 1]
2-class seats[177] 313 396 317
Exit limit[192] 440 550 440[lower-alpha 2]
Length 209 ft 1 in / 63.73 m 242 ft 4 in / 73.86 m 209 ft 1 in / 63.73 m
Wingspan 199 ft 11 in / 60.93 m, 31.6° Wing sweep[285] 212 ft 7 in / 64.80 m, 31.6° Wing sweep[285]
Wing area 4,605 sq ft (427.8 m2),[285] 8.68 AR 4,702 sq ft (436.8 m2),[286] 9.61 AR
Tail height[177] 60 ft 9 in / 18.5 m 60 ft 8 in / 18.5 m 61 ft 1 in / 18.6 m
Fuselage width 20 ft 4 in / 6.20 m
Cabin width 231 in / 5.86 m,[287] Seats: 18.5 in / 47 cm at 9 abreast, 17 in / 43 cm at 10 abreast
Cargo volume[177] 5,330 ft³ / 150.9 m³ 7,120 ft³ / 201.6 m³[lower-alpha 3] 5,330 ft³ / 150.9 m³[lower-alpha 4]
MTOW 545,000 lb / 247,200 kg
200ER: 656,000 lb / 297,550 kg
660,000 lb / 299,370 kg 775,000 lb / 351,533 kg 766,000 lb / 347,452 kg
777F: 766,800 lb / 347,815 kg
OEW 299,550 lb / 135,850 kg
200ER: 304,500 lb / 138,100 kg
353,800 lb / 160,530 kg 370,000 lb / 167,829 kg
300ERSF: 336,000 lb (152 t)[288]
320,000 lb / 145,150 kg
777F: 318,300 lb / 144,379 kg
Fuel capacity 31,000 US gal / 117,340 L / 207,700 lb / 94,240 kg
200ER/300: 45,220 US gal / 171,171 L / 302,270 lb / 137,460 kg
47,890 US gal / 181,283 L / 320,863 lb / 145,538 kg
Ceiling[192] 43,100 ft (13,100 m)
Speed Max. Mach 0.87 – Mach 0.89 (499–511 kn; 924–945 km/h),[192] Cruise Mach 0.84 (482 kn; 892 km/h)
Range[177] 5,240 nmi / 9,700 km[lower-alpha 5][173]
200ER: 7,065 nmi / 13,080 km[lower-alpha 6]
6,030 nmi / 11,165 km[lower-alpha 7][173] 7,370 nmi / 13,649 km[lower-alpha 8]
300ERSF: 4,650 nmi (8,610 km)[288]
8,555 nmi / 15,843 km[lower-alpha 9]
777F: 4,970 nmi (9,200 km)[lower-alpha 10]
Takeoff[lower-alpha 11] 8,000 ft (2,440 m)
200ER:11,100 ft (3,380 m)
10,600 ft (3,230 m) 10,000 ft (3,050 m) 9,200 ft (2,800 m)
777F: 9,300 ft (2,830 m)
Engine 2× PW4000 / Trent 800 / GE90 2× PW4000 / Trent 800[192] 2× GE90-115B[289] 2× GE90-110B/-115B[289]
Max thrust 77,200 lbf (343 kN)
200ER: 2× 93,700 lbf (417 kN)
98,000 lbf (440 kN) 115,300 lbf (513 kN) 110,000–115,300 lbf
489–513 kN
ICAO designation[170] B772 B773 B77W B77L
Diagram of Boeing 777 variants with front, cross-section, side, and top views: 777-200ER on left, 777-300ER on right.

See also

Aircraft of comparable role, configuration, and era

Related lists

  • List of Boeing 777 operators
  • List of Boeing 777 orders and deliveries
  • List of Boeing customer codes
  • List of jet airliners
  • List of civil aircraft

References

Footnotes

  1. 777F: 228,700 lb / 103,737 kg
  2. 777F: 11
  3. 300ERSF: 28,900 cu ft (819 m3)[288]
  4. 777F: 23,051 ft³ / 652.7 m³
  5. 305 passengers, Trents
  6. 313 passengers
  7. 368 passengers, GE90
  8. 396 passengers
  9. 317 passengers
  10. 102 t payload
  11. MTOW, sea level, ISA

Citations

  1. "Boeing: Orders and Deliveries (updated monthly)". The Boeing Company. September 30, 2022. Retrieved October 11, 2022.
  2. "Boeing 777: Orders and Deliveries (updated monthly)". The Boeing Company. July 31, 2020. Retrieved August 11, 2020.
  3. "Annual Boeing Orders and Deliveries". The Boeing Company. April 30, 2019. Retrieved May 14, 2019.
  4. Grantham, Russell (February 29, 2008). "Delta's new Boeing 777 Can Fly Farther, Carry More". The Atlanta Journal-Constitution. Delta will put the new "triple seven" — as airline folks call the jet — into service March 8.
  5. Robertson, David (March 13, 2009). "Workhorse Jet Has Been Huge Success with Airlines that Want to Cut Costs". The Times. London, England, United Kingdom: Times Newspapers. Archived from the original on June 12, 2011.
  6. Birtles 1998, pp. 52
  7. Norris & Wagner 1996, p. 89
  8. Ellis Taylor (September 1, 2017). "777 Classics entering their twilight years". Flightglobal. Archived from the original on September 11, 2017. Retrieved September 11, 2017.
  9. "Boeing's 747 aircraft fleet: the original jumbo, overtaken by the 777". CAPA - centre for aviation. April 28, 2018.
  10. "World Airline Census 2018". Flightglobal. August 21, 2018. Archived from the original on November 6, 2018. Retrieved August 21, 2018.
  11. "Boeing 777 occurrences". aviation-safety.net. Aviation Safety Network. March 3, 2019. Archived from the original on June 20, 2017. Retrieved February 21, 2021.
  12. "Boeing 777 hull losses". Aviation Safety Network. March 3, 2019. Archived from the original on August 13, 2016. Retrieved March 3, 2019.
  13. "Boeing 777 Accident Statistics". Aviation Safety Network. September 25, 2018. Archived from the original on August 12, 2016. Retrieved March 3, 2019.
  14. Wells & Rodrigues 2004, p. 146
  15. "The 1980s Generation". Time. August 14, 1978. Archived from the original on November 18, 2007. Retrieved July 19, 2008.
  16. Eden 2008, pp. 98, 102–103
  17. "Boeing 767 and 777". Flight International. May 13, 1978. Archived from the original on November 6, 2018. Retrieved September 10, 2018.
  18. Eden 2008, pp. 99–104
  19. Norris & Wagner 1999, p. 128
  20. Yenne 2002, p. 33
  21. Eden 2008, p. 112
  22. Norris & Wagner 1999, p. 126
  23. Norris & Wagner 1999, p. 127
  24. Eden 2008, p. 106
  25. Norris & Wagner 2001, p. 11
  26. Norris & Wagner 1996, pp. 9–14
  27. Norris & Wagner 1999, p. 129
  28. "Executive Biographies: Alan Mulally". Boeing. May 2006. Archived from the original on August 31, 2006. Retrieved September 5, 2006.
  29. Zhang, Benjamin. "The glorious history of the best plane Boeing has ever built". Business Insider. Archived from the original on September 22, 2019. Retrieved September 22, 2019.
  30. Birtles 1998, pp. 13–16
  31. Weiner, Eric (December 19, 1990). "New Boeing Airliner Shaped by the Airlines". The New York Times. Archived from the original on December 11, 2011. Retrieved May 8, 2011.
  32. Lane, Polly (December 1, 1991). "Aerospace Company May Be Rethinking Commitment To The Puget Sound Area". Seattle Times. Archived from the original on August 11, 2011. Retrieved October 15, 2009.
  33. Norris & Wagner 1999, p. 132
  34. "Business Notes: Aircraft". Time. October 29, 1990. Archived from the original on November 18, 2007. Retrieved July 19, 2008.
  35. Norris & Wagner 1996, p. 14
  36. Norris & Wagner 1996, p. 13
  37. Norris & Wagner 1996, p. 15
  38. Norris & Wagner 1996, p. 20
  39. "BA Gets New 777 Model". Seattle Post-Intelligencer. February 10, 1997. Archived from the original on November 5, 2012. Retrieved July 4, 2015.
  40. An Introduction to Mechanical Engineering. Cl-Engineering. January 2012. p. 19. ISBN 978-1-111-57680-6. As an example, the Boeing 777 was the first commercial airliner developed through a paperless computer-aided design process.
  41. Norris & Wagner 1999, p. 133
  42. Norris & Wagner 1999, pp. 133–134
  43. Abarbanel & McNeely 1996, p. 124 Note: IVT is still active at Boeing in 2010 with over 29,000 users.
  44. Norris & Wagner 1996, p. 21
  45. Tkacik, Maureen (September 18, 2019). "Crash Course". The New Republic. Archived from the original on September 19, 2019. Retrieved September 22, 2019.
  46. AW&ST April 26, 1999, p. 39
  47. Eden 2008, p. 108
  48. Hise, Phaedra (July 9, 2007). "The power behind Boeing's 787 Dreamliner". CNN. Archived from the original on December 24, 2009. Retrieved October 15, 2009.
  49. Richardson, Michael (February 23, 1994). "Demand for Airliners Is Expected to Soar: Asia's High-Flying Market". International Herald Tribune. Archived from the original on July 14, 2011. Retrieved March 20, 2009.
  50. Sabbagh 1995, pp. 112–114
  51. Norris & Wagner 1999, pp. 136–137
  52. "A question of choice". Flight International. January 3, 2000. Archived from the original on April 14, 2009. Retrieved March 29, 2009.
  53. Sabbagh 1995, pp. 168–169
  54. Norris, Guy (March 31, 1993). "Boeing prepares for stretched 777 launch". Flight International. Archived from the original on July 24, 2012. Retrieved May 8, 2011.
  55. Norris & Wagner 1996, p. 7
  56. Sabbagh 1995, pp. 256–259
  57. Eden 2008, p. 107
  58. Birtles 1998, p. 25
  59. Andersen, Lars (August 16, 1993). "Boeing's 777 Will Be Tops When It Comes To ETOPS". Seattle Times. Archived from the original on August 11, 2011. Retrieved March 20, 2009.
  60. Norris & Wagner 1999, p. 144
  61. Birtles 1998, p. 40
  62. Birtles 1998, p. 20
  63. Birtles 1999, p. 34
  64. Birtles 1998, p. 69
  65. "First Boeing 777 delivery goes to United Airlines". Business Wire. May 15, 1995. Archived from the original on August 20, 2011. Retrieved July 4, 2015.
  66. Norris & Wagner 1999, p. 139
  67. Birtles 1998, p. 80
  68. 180-minute ETOPS approval was granted to the General Electric GE90 powered 777 on October 3, 1996, and to the Rolls-Royce Trent 800-powered 777 on October 10, 1996.
  69. Eden 2004, p. 115.
  70. Norris & Wagner 1999, p. 143
  71. Norris & Wagner 1999, p. 147
  72. Norris & Wagner 1999, pp. 146–147
  73. "Boeing Roars Ahead". BusinessWeek. November 6, 2005. Archived from the original on March 2, 2009. Retrieved December 1, 2008.
  74. Norris & Wagner 1999, p. 148
  75. "777 Reliability Data" (PDF). Boeing. Archived from the original (PDF) on February 2, 2014.
  76. "Trouble-plagued Dreamliner only 98% reliable, Boeing admits". Boeing
  77. "777". boeing.com. Archived from the original on March 30, 2015. Retrieved April 1, 2015.
  78. Wyndham, David (October 2012). "Aircraft Reliability". AvBuyer. World Aviation Communication Ltd. Archived from the original on February 21, 2014. Retrieved January 23, 2014.
  79. Eden 2008, p. 113
  80. Eden 2008, pp. 112–113
  81. "The Boeing 777 Program Background". Boeing. Archived from the original on June 8, 2009. Retrieved June 6, 2009.
  82. Haenggi, Michael. "777 Triple Seven Revolution". Boeing Widebodies. St. Paul, Minnesota: MBI, 2003. ISBN 0-7603-0842-X.
  83. Norris & Wagner 1999, p. 151
  84. Norris & Wagner 2001, p. 125
  85. Norris & Wagner 1999, pp. 151–157
  86. Norris & Wagner 1999, p. 165
  87. Norris & Wagner 1999, pp. 165–167
  88. Norris, Guy (May 15, 1996). "Boeing sets decision date for new versions of 777". Flight International. Archived from the original on April 14, 2009. Retrieved March 29, 2009.
  89. "...as board approves 777-200X/300X specifications". Flight International. March 5, 1997. Archived from the original on August 21, 2017. Retrieved June 6, 2017.
  90. "GE is first to agree MoU for 777-200X/300X powerplant". Flightglobal. March 26, 1997. Archived from the original on September 19, 2017. Retrieved June 6, 2017.
  91. "Boeing's long stretch". Flightglobal. December 3, 1997. Archived from the original on October 30, 2019. Retrieved June 6, 2017.
  92. Guy Norris/ (January 27, 1999). "Initial Trent 8104 tests reveal new growth potential". Flightglobal. Archived from the original on October 30, 2019. Retrieved October 30, 2019.
  93. "Aero-Engines – Rolls-Royce Trent". Jane's Transport Business News. February 13, 2001. Archived from the original on March 25, 2008. Retrieved March 21, 2009.
  94. "Boeing launches stretch 777 jetliner". Deseret News. February 29, 2000. Archived from the original on November 7, 2013. Retrieved October 28, 2009.
  95. Song, Kyung (October 5, 2000). "Air France orders 10 777s". The Seattle Times. Archived from the original on August 11, 2011. Retrieved September 15, 2009.
  96. Dinell, David (March 16, 2004). "Boeing's 777-300ER receives certification". Wichita Business Journal. Archived from the original on August 5, 2011. Retrieved March 20, 2009.
  97. Jon Ostrower (August 7, 2008). "Green and versatile". Flight International. Archived from the original on March 7, 2016. Retrieved February 25, 2016.
  98. Thomas, Geoffrey (June 13, 2008). "Boeing under pressure as demand rises for fuel-saver 777". The Australian. Archived from the original on April 30, 2014. Retrieved June 20, 2008.
  99. Wallace, James (February 3, 2006). "777 distance champ is certified for service". Seattle Post-Intelligencer. Archived from the original on December 3, 2013. Retrieved December 10, 2008.
  100. Chaudhry, Muhammad Bashir (November 18, 2008). "Modernization of PIA fleet". Pakistan Dawn. Archived from the original on April 13, 2009. Retrieved February 12, 2008.
  101. Phillips, Don (November 10, 2005). "Flight of Boeing's 777 Breaks Distance Record". The New York Times. International Herald Tribune. Archived from the original on February 3, 2015. Retrieved October 14, 2013.
  102. Glenday 2007, p. 200
  103. Trimble, Stephen (May 23, 2008). "Boeing 777F makes its debut ahead of flight test phase". Flight International. Archived from the original on May 26, 2008. Retrieved June 6, 2008.
  104. "Datafile: Boeing 777F". Flug Revue. 2006. Archived from the original on January 30, 2008. Retrieved March 20, 2009.
  105. Ionides, Nicholas (July 15, 2008). "Boeing 777F flies for the first time". Flight International. Archived from the original on April 14, 2009. Retrieved March 20, 2009.
  106. "European Aviation Safety Agency Validates FAA Certification of Boeing 777 Freighter". Reuters. February 6, 2009. Archived from the original on July 26, 2012. Retrieved July 1, 2011.
  107. Ionides, Nicholas. "First 777 freighter delivered to Air France". Air Transport Intelligence via Flightglobal.com. Archived from the original on February 21, 2009. Retrieved February 20, 2009.
  108. "Boeing launches cargo version of 777". Associated Press. May 24, 2005. Archived from the original on April 26, 2014. Retrieved March 20, 2009.
  109. Song, Kyung (June 4, 2000). "Who builds a better widebody?". The Seattle Times. Archived from the original on August 11, 2011. Retrieved October 29, 2009.
  110. Ray, Susanna (April 21, 2009). "Boeing Earnings Buffeted by 777 Production Slump". Bloomberg. Archived from the original on November 19, 2018. Retrieved October 29, 2009.
  111. Gates, Dominic (November 16, 2004). "Freighter version of 777 jetliner in works". The Seattle Times. Archived from the original on August 11, 2011. Retrieved October 29, 2009.
  112. "Airbus A350 XWB puts pressure on Boeing 777". flightglobal. November 26, 2007. Archived from the original on March 8, 2016. Retrieved February 25, 2016.
  113. Hepher, Tim (September 8, 2008). "Sizing up Boeing's plane portfolio". Reuters. Archived from the original on June 24, 2011. Retrieved June 3, 2011.
  114. Ranson, Lori (December 20, 2010). "Boeing unveils another increase in Boeing 777 production". Air Transport Intelligence via Flightglobal.com. Archived from the original on December 23, 2010. Retrieved January 2, 2011.
  115. "Boeing Begins Work on 1,000th 777". Boeing. November 7, 2011. Archived from the original on November 13, 2011. Retrieved November 8, 2011.
  116. Norris & Wagner 2009, pp. 32–35.
  117. "Emirates airline receives 1,000th Boeing 777". Gulf News. March 3, 2012. Archived from the original on March 4, 2012. Retrieved March 3, 2012.
  118. "Order trickle continues for in-production widebodies". Flight International. September 8, 2008. Archived from the original on November 7, 2010. Retrieved November 2, 2010.
  119. Ostrower, Jon (September 8, 2008). "Boeing looks to extend 777 wingspan for incremental improvement package". Flight International. Archived from the original on March 22, 2010. Retrieved March 17, 2010.
  120. Ostrower, Jon (June 21, 2011). "PARIS: Boeing mulls 777-9X". Air Transport Intelligence via Flightglobal.com. Archived from the original on June 24, 2011. Retrieved July 4, 2011.
  121. "Emirates may be launch customer for new Boeing 777" Archived October 19, 2011, at the Wayback Machine. Seattle Post-Intelligencer, September 12, 2011. Retrieved September 14, 2011.
  122. Perrett, Bradley, Very Chinese, Aviation Week & Space Technology, February 16 – March 1, 2015, pp.38-9
  123. "Boeing Launches 777X with Record-Breaking Orders and Commitments" (Press release). Boeing. November 17, 2013. Archived from the original on February 13, 2014. Retrieved December 23, 2013.
  124. Reed, Ted (February 11, 2017). "Boeing 777 Flies Seven Of The World's Ten Longest Routes". Forbes. Archived from the original on June 29, 2019. Retrieved June 29, 2019.
  125. Brandon, Graver; Daniel, Rutherford (January 2018). "Transpacific Airline Fuel Efficiency Ranking, 2016" (PDF). International Council of Clean Transportation. Archived (PDF) from the original on August 19, 2019. Retrieved June 29, 2019.
  126. Trimble, Stephen (April 15, 2014). "How the 777 pushed Boeing forward". Flight International. Archived from the original on January 2, 2016. Retrieved April 20, 2014.
  127. Perry, Dominic (April 7, 2015), "Boeing thinks smarter to boost 777, 737 appeal", Flightglobal, Reed Business Information, archived from the original on April 9, 2015, retrieved April 8, 2015
  128. "Boeing to Trim 777 Production, to Boost 737 Build Rate". Airways News. January 27, 2016. Archived from the original on August 21, 2016. Retrieved September 6, 2016.
  129. "Boeing warns 777 rate could drop to 3.5 per month". FlightGlobal. October 26, 2016. Archived from the original on October 27, 2016. Retrieved October 27, 2016.
  130. "Boeing to lower 777 rate to five monthly in August 2017". Flight Global. December 13, 2016. Archived from the original on December 14, 2016. Retrieved December 13, 2016.
  131. Jon Hemmerdinger (October 27, 2020). "More aircraft production rate cuts coming? Perhaps, analysts say". Flightglobal. Archived from the original on October 31, 2020. Retrieved October 30, 2020.
  132. Norris, Guy. "Mind the gap". Aviation Week & Space Technology, February 16 – March 1, 2015, pp. 42-3.
  133. Norris, Guy. "Sharpened edge". Aviation Week & Space Technology, March 16–29, 2015, pp. 26-8.
  134. "United and 777-300ERs". Leeham News. January 20, 2015. Archived from the original on January 21, 2015. Retrieved January 21, 2015.
  135. Norris, Guy (March 14, 2019). "Boeing Unveils 777-9 In Low-Key Event". aviationweek.com. Archived from the original on November 17, 2019. Retrieved June 27, 2019.
  136. "About Boeing Commercial Airplanes: Prices". Boeing. Archived from the original on April 25, 2020. Retrieved February 23, 2019.
  137. North, David. "Finding Common Ground in Envelope Protection Systems". Aviation Week & Space Technology, August 28, 2008, pp. 66–68.
  138. Birtles 1998, p. 57
  139. Norris & Wagner 1996, p. 47
  140. Sweetman, Bill (September 1, 2005). "The Short, Happy Life of the Prop-fan". Air & Space. Archived from the original on July 30, 2013. Retrieved December 1, 2008.
  141. Corliss, Bryan (November 5, 2003). "New Boeing 777 Boasts Breakthrough Video System". Forbes. Archived from the original on December 2, 2013. Retrieved May 5, 2009.
  142. Norris, Guy (November 25, 2013). "Dubai Provides Runway For 777X Program Launch". Aviation Week & Space Technology. Archived from the original on November 25, 2013. Retrieved November 25, 2013.
  143. Ropelewski, Robert (June 1995). "Flying the Boeing 777.(Evaluation)". Interavia Business & Technology. Archived from the original on September 24, 2015. Retrieved June 29, 2015 via HighBeam.
  144. Newhouse 2008, p. 106
  145. Norris & Wagner 1999, p. 130
  146. 777-200LR/-300ER/-Freighter Airplane Characteristics for Airport Planning (PDF) (Technical report). Boeing. May 2015. Archived (PDF) from the original on February 9, 2015. Retrieved February 8, 2015.
  147. Morris, Doug (March 2012). "What determines the kind of aircraft that will be used for a particular route?". EnRoute. Archived from the original on April 4, 2012. Retrieved March 17, 2012.
  148. "Type Acceptance Report – Boeing 777" (PDF). Civil Aviation Authority of New Zealand. Archived from the original (PDF) on December 19, 2008. Retrieved December 1, 2008.
  149. Norris & Wagner 1996, p. 35
  150. Norris & Wagner 1996, p. 92
  151. Eden 2008, p. 111
  152. Turner, Aimee (March 28, 2006). "ADP to revamp runway at Orly". Flight International. Archived from the original on April 14, 2009. Retrieved April 2, 2009.
  153. Birtles 1998, p. 66
  154. Birtles 1998, p. 60
  155. "Boeing 777-300ER (77W) - United Airlines". united.com. Archived from the original on August 22, 2017. Retrieved May 8, 2017.
  156. Norris & Wagner 2001, pp. 32–33
  157. Wallace, James (November 26, 2008). "Continental plans Dreamliner seats to be roomy, with a view". Seattle Post-Intelligencer. Archived from the original on November 6, 2012. Retrieved July 1, 2011.
  158. "Lufthansa Technik turns out first customized VIP Boeing 777". Lufthansa Technik. December 22, 2000. Archived from the original on June 15, 2009. Retrieved October 25, 2008.
  159. Stover, Dawn (June 1994). "The newest way to fly". Popular Science: 78–79, 104. Archived from the original on May 27, 2021. Retrieved December 19, 2020.
  160. Wallace, James (February 4, 2003). "Boeing adds places for crews to snooze". Seattle Post-Intelligencer. Archived from the original on August 11, 2011. Retrieved June 3, 2011.
  161. Norris & Wagner 1999, p. 122
  162. Norris & Wagner 1999, pp. 46, 112
  163. Kirby, Mark (July 7, 2011). "Boeing eyes 'common cabin experience' across platforms". Air Transport Intelligence via Flightglobal.com. Archived from the original on July 10, 2011. Retrieved July 8, 2011.
  164. Johnsson, Julie (May 1, 2014). "Boeing Maps Boost in Cabin Comfort for Next 777". Bloomberg. Archived from the original on May 1, 2014. Retrieved May 1, 2014.
  165. Will Horton (January 12, 2020). "Air France worries A350-1000 will help low-cost, long-haul competitors". Runway Girl Network. Archived from the original on January 27, 2020. Retrieved January 27, 2020.
  166. Guy Norris (January 26, 2015). "Boeing 777 - Unveiling A Design Classic (1990)". Aviation Week Network. Archived from the original on October 18, 2018. Retrieved November 25, 2019.
  167. Peter Pugh (2002). The Magic of a Name: The Rolls-Royce Story, Part 3: A Family of Engines. Icon Books Ltd. ISBN 978-1-84831-998-1. Archived from the original on May 27, 2021. Retrieved December 19, 2020.
  168. David Learmount (September 5, 1990). "Mass market". Flight International. Archived from the original on October 29, 2017. Retrieved October 29, 2017.
  169. "IATA Aircraft Codes". Flugzeuginfo. Archived from the original on November 14, 2017. Retrieved October 29, 2017.
  170. "ICAO Document 8643." Archived June 7, 2017, at the Wayback Machine International Civil Aviation Organization. Retrieved: January 8, 2018.
  171. John, Danny (September 12, 2007). "Air NZ must ask shareholders". Sydney Morning Herald. Archived from the original on April 13, 2009. Retrieved March 30, 2009.
  172. "Cathay Pacific puts its trust in Boeing". Asia Times Online. December 3, 2005. Archived from the original on March 16, 2006. Retrieved March 30, 2009.{{cite web}}: CS1 maint: unfit URL (link)
  173. "777 performance summary" (PDF). Boeing. 2009. Archived from the original (PDF) on August 2, 2014.
  174. Wallace, James (November 19, 2001). "Aerospace Notebook: Conner's best bet – Let it ride on the 777s but airlines aren't ready to commit to 200LR model". Seattle Post-Intelligencer. Archived from the original on November 5, 2012. Retrieved May 8, 2011.
  175. Mutzabaugh, Ben (March 9, 2016). "United confirms 10-abreast seating on some of its 777s". USA Today. Archived from the original on June 28, 2019. Retrieved June 28, 2019.
  176. Martin, Hugo (October 21, 2017). "United Airlines becomes latest carrier to put economy passengers in rows of 10 seats". Los Angeles Times. Archived from the original on June 28, 2019. Retrieved June 28, 2019.
  177. "777 Characteristics". Boeing. Archived from the original on December 31, 2016. Retrieved February 25, 2016.
  178. Robert Wall (October 31, 2005). "Boeing talks up 747 Advanced, talks down Airbus A350". Aviation Week & Space Technology. p. 40. Archived from the original on November 13, 2018. Retrieved November 13, 2018.
  179. James Wallace (December 21, 2005). "Everett work force for 787 pegged at 1,000". Seattle Post-Intelligencer. Archived from the original on August 22, 2018. Retrieved October 29, 2017.
  180. Aircraft Value News (November 12, 2018). "The Last Decade Has Not Favored B777-200ER Values". Archived from the original on November 13, 2018. Retrieved November 13, 2018.
  181. "SIA's new long-haul LCC to start with 400-seat B777s, plans 16-aircraft fleet within four years". CAPA Centre for Aviation. September 1, 2011. Archived from the original on March 17, 2012. Retrieved March 22, 2012.
  182. "Our Fleet". Singapore Airlines. 2012. Archived from the original on March 24, 2012. Retrieved March 22, 2012.
  183. "Datafile: Boeing 777-200LR Worldiner". Flug Revue. 2006. Archived from the original on May 17, 2008. Retrieved March 20, 2009.
  184. Field, David (March 17, 2008). "Delta pushes Boeing to squeeze more range from 777-200LR". Flight International. Archived from the original on March 20, 2008. Retrieved December 2, 2008.
  185. "FAA Type Certificate Data Sheet T00001SE" (PDF). Federal Aviation Administration. Archived from the original (PDF) on February 4, 2016. Retrieved November 5, 2009.
  186. 777-200/300 Airplane Characteristics for Airport Planning (PDF) (Technical report). Boeing. December 2008. Archived (PDF) from the original on September 23, 2015. Retrieved February 8, 2015.
  187. "Deliveries". Boeing. Archived from the original on December 17, 2013. Retrieved September 8, 2009.
  188. "Boeing: Commercial Orders & Deliveries: Dec 2021". www.boeing.com. December 12, 2021. Archived from the original on October 2, 1999. Retrieved December 5, 2021.
  189. Thisdell, Dan; Morris, Rob (July 31, 2017). "World Airliner Census 2017". Flightglobal Insight. Flight International. Flightglobal (published August 12, 2017).
  190. "Bjorn's Corner: Increasing an aircraft's range - Leeham News and Comment". October 16, 2015. Archived from the original on August 9, 2018. Retrieved August 25, 2017.
  191. Guy Norris (December 3, 1997). "Boeing's long stretch". Flight International. Archived from the original on December 1, 2017. Retrieved October 29, 2017.
  192. "Type Certificate data sheet No. T00001SE" (PDF). FAA. August 12, 2016. Archived (PDF) from the original on November 13, 2016. Retrieved October 23, 2016.
  193. Guy Norris (January 28, 2003). "Long Ranger". Flight International. Archived from the original on October 5, 2016. Retrieved February 25, 2016.
  194. Scott Hamilton (February 3, 2014). "Updating the A380: the prospect of a neo version and what's involved". Leeham news. Archived from the original on April 8, 2014. Retrieved June 21, 2014.
  195. Paul Eisenstein (July 2004). "Biggest Jet Engine". Popular Mechanics. Archived from the original on December 24, 2014. Retrieved June 3, 2011.
  196. Geoffrey Thomas (December 2, 2005). "Boeing nose ahead in Qantas order race". The Australian. Archived from the original on December 4, 2005.
  197. David M. North (April 5, 2004). "In the Stretch - Flying the 777-300ER". Aviation week. Archived from the original on July 25, 2018. Retrieved July 25, 2018.
  198. "Flight Test: Boeing 777-300ER - Fast and heavy". Flightglobal. January 20, 2004. Archived from the original on October 24, 2016. Retrieved October 23, 2016.
  199. "777-300ER fleet report: orders have peaked but Swiss, United and Kuwait new operators in 2016". CAPA - Centre for Aviation. February 25, 2016. Archived from the original on August 27, 2016. Retrieved February 25, 2016.
  200. Ben Kingsley-Jones; Guy Norris (November 29, 2005). "Enhanced A340 to take on 777". Flight International. Archived from the original on March 7, 2016. Retrieved February 25, 2016.
  201. "The A380's future". AirInsight. November 20, 2015. Archived from the original on April 13, 2016. Retrieved April 22, 2016.
  202. "New Boeing 777-300ER Joins Air France Fleet" (PDF). Air France. May 13, 2004. Archived from the original (PDF) on September 17, 2012. Retrieved August 25, 2013.
  203. Aircraft Value News (March 18, 2019). "B777-300ER Residuals Come Under Spotlight". Archived from the original on September 19, 2020. Retrieved March 18, 2019.
  204. Norris, Guy (May 16, 2006). "Cargo Kings: new Boeing 777F and 747-8F programmes". Flight International. Archived from the original on October 27, 2016. Retrieved October 27, 2016.
  205. "777-200LR/-300ER/-Freighter Airplane Characteristics for Airport Planning" (PDF). Boeing. May 2015. Archived (PDF) from the original on February 24, 2021. Retrieved March 31, 2021.
  206. Jason S. Clark and Kenneth D. Kirwan (May 2015). "777 Freighter: Efficiency for Long-Haul Operators". Aero Magazine. Boeing. Archived from the original on March 1, 2021. Retrieved March 31, 2021.
  207. "Air France to buy Boeing 777 freighters". USA Today. Associated Press. March 25, 2005. Archived from the original on August 4, 2011. Retrieved October 19, 2010.
  208. Sobie, Brendan (September 23, 2008). "Boeing reveals cargo conversion development studies for 777". Air Transport Intelligence via Flightglobal.com. Archived from the original on November 17, 2015. Retrieved October 19, 2010.
  209. Sobie, Brendan (October 19, 2010). "Boeing expects to secure 777BCF launch customer in early 2011". Air Transport Intelligence via Flightglobal.com. Archived from the original on November 17, 2015. Retrieved October 19, 2010.
  210. "Farnborough: Boeing Global Services ponders 777-300ER P2F program". Leeham News. July 17, 2018. Archived from the original on November 6, 2018. Retrieved July 19, 2018.
  211. "Boeing's growing 777X challenge". Leeham News. October 23, 2018. Archived from the original on November 16, 2018. Retrieved October 24, 2018.
  212. Kingsley-Jones, Max (October 16, 2019). "GECAS and IAI launch 777-300ER cargo conversion". Flightglobal. Archived from the original on October 17, 2019. Retrieved October 17, 2019.
  213. Jon Hemmerdinger (October 28, 2020). "Kalitta to be launch operator of 777-300ERSF converted freighter". Flightglobal. Archived from the original on November 1, 2020. Retrieved October 29, 2020.
  214. "New Boeing 777X Completes Successful First Flight" (Press release). Boeing. January 25, 2020. Archived from the original on January 26, 2020. Retrieved January 27, 2020.
  215. "Boeing's First 777X Delivery Has Been Delayed To 2022". simpleflying.com. July 29, 2020. Archived from the original on October 11, 2020. Retrieved October 3, 2020.
  216. McDermott, John (June 27, 2021). "Boeing 777X Certification Delayed To 2023 After FAA Notification". AirlineGeeks. Archived from the original on June 28, 2021. Retrieved August 10, 2021.
  217. Hemmerdinger, Jon. "Qatar offers to be launch customer for a 777X freighter". Flight Global. Archived from the original on December 18, 2020. Retrieved December 9, 2020.
  218. "Boeing Business Jets Delivers 777-200LR to Aviation Link Company". Boeing. November 10, 2010. Archived from the original on August 14, 2014. Retrieved August 14, 2014.
  219. Waldron, Greg (June 11, 2014). "Boeing receives order for 777-300ER BBJ". Flight International. Archived from the original on August 14, 2014. Retrieved August 14, 2014.
  220. Sarsfield, Kate (March 13, 2015), "Jet Aviation secures completion contract for two BBJ 777-300ERs", Flightglobal, Reed Business Information, archived from the original on March 15, 2015, retrieved March 14, 2015
  221. Sachdev, Ameet (September 27, 2006). "Boeing adds 777 to tanker mix". Chicago Tribune. Archived from the original on January 8, 2012. Retrieved May 8, 2011.
  222. Norris, Guy (October 3, 2006). "US Air Force tanker RFP reveals KC-777 offer". Flight International. Archived from the original on June 18, 2009. Retrieved April 21, 2009.
  223. "Ready to fill 'er up" (PDF). Boeing. November 2006. Archived (PDF) from the original on August 13, 2011. Retrieved April 21, 2009.
  224. Vandruff, Ken (April 11, 2007). "Boeing submits KC-767 tanker proposal". Wichita Business Journal. Archived from the original on August 5, 2011. Retrieved March 20, 2009.
  225. Warwick, Graham (November 8, 2006). "USAF lays out X, Y and Z of tanker replacement strategy in three-tranche process to replace ageing KC-135s". Flight International. Archived from the original on August 14, 2014. Retrieved August 14, 2014.
  226. "Japan chooses Boeing 777-300ER as government's official jet". Japan Times. Jiji. August 12, 2014. Archived from the original on June 28, 2017. Retrieved August 13, 2014.
  227. "政府専用機、後継の導入検討 官房長官". 日本経済新聞. July 19, 2013. Archived from the original on September 19, 2020. Retrieved March 10, 2020.
  228. "Boeing 777 de Papa Romeo". Convention de la Diaspora Gabonaise. March 17, 2014. Archived from the original on April 3, 2014. Retrieved August 14, 2014.
  229. "Turkmen Triple". Airliner World. May 2014, p. 13.
  230. Hack, Christopher (September 3, 2000). "The battle for Lebanon's premiership". BBC. Archived from the original on August 14, 2014. Retrieved August 14, 2014.
  231. "Narendra Modi's Air India One Gets Rs 1300 Cr Defence Upgrade Like The American Air Force One". indiatimes.com. February 7, 2019. Archived from the original on March 31, 2019. Retrieved March 31, 2019.
  232. "WATCH: VVIP aircraft Air India One for President, PM arrives in Delhi". mint. October 1, 2020. Retrieved October 14, 2021.
  233. Wilhelm, Steve. "Will U.S. copy Japan and switch to 777 for Air Force One?". Puget Sound Business Journal. Archived from the original on August 14, 2014. Retrieved September 14, 2014.
  234. "AF Identifies Boeing 747-8 platform for next Air Force One". United States Air Force. United States Air Force. January 28, 2015. Archived from the original on March 3, 2016. Retrieved January 28, 2015.
  235. Gale, Ivan (July 19, 2010). "Emirates $9bn deal beats expectations". The National. Archived from the original on October 6, 2012. Retrieved March 3, 2012.
  236. Randy Tinseth (January 6, 2019). "Still Climbing: 777 Soars Past 2,000 Orders". Boeing. Archived from the original on January 8, 2019. Retrieved January 7, 2019.
  237. "Historic Cathay 777 heads for US museum". FlightGlobal. Archived from the original on January 24, 2019. Retrieved November 24, 2019.
  238. "The Museum of Flight". facebook.com. Archived from the original on May 27, 2021. Retrieved June 28, 2018.
  239. "Cathay Pacific, Boeing to donate world's 1st 777 to aviation museum". Cathay Pacific. Archived from the original on September 17, 2018. Retrieved September 17, 2018.
  240. "The first Boeing 777 goes to museum". Airliner Watch. Archived from the original on June 22, 2018. Retrieved June 21, 2018.
  241. Swopes, Bryan. "12 June 1994". This Day in Aviation. Archived from the original on June 22, 2018. Retrieved June 22, 2018.
  242. "Boeing 777-2B5/ER". Airliners.net. September 29, 2022. Retrieved October 8, 2022.
  243. "[동원과학기술대학교] Landing!! BOEING-777". YouTube (in Korean). October 8, 2022. Retrieved October 8, 2022.
  244. "NTSB Investigates B777 Uncommanded Engine Rollback". Air Safety Week. December 22, 2008. Archived from the original on November 4, 2013. Retrieved April 2, 2009.
  245. "Safety Recommendation: In reply refer to: A-09-17 (Urgent) and −18". Mayday, Discovery Channel. March 11, 2009. Archived from the original on March 5, 2016. Retrieved October 23, 2015.
  246. "British Airways Flight 2019 ground fire". Aviation Safety Network. Archived from the original on November 15, 2010. Retrieved November 21, 2008.
  247. "DEN01FA157 entry". National Transportation Safety Board. February 24, 2005. Archived from the original on October 5, 2016. Retrieved January 2, 2011.
  248. British Airways (February 1, 2008). "Interim Management Statement". Regulatory News Service. Archived from the original on January 16, 2009. Retrieved November 21, 2008.
  249. "Report on the accident to Boeing 777-236ER, G-YMMM, at London Heathrow Airport on 17 January 2008" (PDF). Air Accidents Investigation Branch. February 9, 2010. Archived (PDF) from the original on December 18, 2014. Retrieved February 9, 2010.
  250. "'High risk' of plane fault repeat". BBC News. March 13, 2009. Archived from the original on March 21, 2009. Retrieved March 20, 2009.
  251. Kaminski-Morrow, David (February 29, 2008). "American investigates as 777 engine fails to respond to throttle". Flight International. Archived from the original on March 4, 2008. Retrieved March 20, 2009.
  252. Woodman, Peter (February 9, 2010). "Ice 'probable cause' of Heathrow crash-landing". The Independent. UK. Archived from the original on January 26, 2012. Retrieved December 11, 2011.
  253. "EgyptAir Flight 667 ground fire". Aviation Safety Network. Archived from the original on March 9, 2014. Retrieved January 2, 2012.
  254. "Recent Incidents / Accidents Worldwide". Jet Airliner Crash Data Evaluation Centre. July 2011. Archived from the original on January 6, 2012. Retrieved January 2, 2012.
  255. Descent Below Visual Glidepath and Impact With Seawall, Asiana Airlines Flight 214, Boeing 777-200ER, HL7742, San Francisco, California, July 6, 2013 (PDF). National Transportation Safety Board. June 24, 2014. Archived (PDF) from the original on April 30, 2017. Retrieved July 12, 2017.
  256. "3rd fatality in Asiana flight crash". CBS News. July 12, 2013. Archived from the original on July 3, 2017. Retrieved July 12, 2017.
  257. "One Asiana victim killed by a vehicle, not plane crash - coroner". Reuters News Agency. July 20, 2013. Archived from the original on July 21, 2013. Retrieved August 8, 2013.
  258. "Asiana 777-200ER crashes at San Francisco airport". Flight International. July 6, 2013. Archived from the original on July 9, 2013. Retrieved July 6, 2013.
  259. "Pilot Error Eyed in San Francisco Plane Crash". The Wall Street Journal. July 8, 2013. Archived from the original on July 22, 2015. Retrieved July 8, 2013. National Transportation Safety Board Chairman Deborah Hersman's comments indicated investigators were focused primarily on why the cockpit crew allowed speed to decay to such an extent ...
  260. Withnall, Adam (June 25, 2014). "Asiana Airlines flight 214 crash caused by Boeing planes being 'overly complicated'". The Independent. Archived from the original on July 26, 2014. Retrieved July 17, 2014.
  261. Descent Below Visual Glidepath and Impact With Seawall, Asiana Airlines Flight 214, Boeing 777-200ER, HL7742, San Francisco, California, July 6, 2013 (PDF). National Transportation Safety Board. June 24, 2014. NTSB/AAR-14/01. Archived (PDF) from the original on March 20, 2016. Retrieved January 16, 2016.
  262. "Night search for missing 777 to test Malaysia and Vietnam". Flight Global. Archived from the original on March 8, 2014. Retrieved March 8, 2014.
  263. "Friday, March 14, 12:00 AM MYT +0800 Malaysia Airlines MH370 Flight Incident - 18th Media Statement". Malaysia Airlines. March 14, 2014. Archived from the original on March 8, 2014.
  264. Reed Business Information Limited. "'Equal importance' given to both corridors in MH370 search". flightglobal.com. Archived from the original on October 23, 2014. Retrieved April 1, 2015.
  265. "Flight MH370 'crashed in south Indian Ocean' - Malaysia PM". BBC News. March 24, 2014. Archived from the original on May 2, 2014. Retrieved April 1, 2015.
  266. Ng, Eileen (January 29, 2015). "Malaysia declares MH370's disappearance an accident". The Star. Toronto Star Newspaper Ltd. The Associated Press. Archived from the original on February 1, 2015. Retrieved January 29, 2015.
  267. "MH370: Full statement by DCA". The Star Online. Star Media Group Berhad. January 29, 2015. Archived from the original on February 3, 2015. Retrieved April 20, 2015.
  268. Almasy, Steve; Carter, Chelsea J.; Clancy, Jim (March 18, 2014). "Malaysia Airlines Flight 370 search grows, pilots face scrutiny". CNN. Archived from the original on November 29, 2020. Retrieved December 22, 2020.
  269. Collins, David (March 24, 2014). "FBI to quiz wife of Flight MH370 pilot amid fears of cockpit hijack of missing plane". mirror. Archived from the original on March 8, 2021. Retrieved December 22, 2020.
  270. "MH370: What's next in the investigation?". CNN. Archived from the original on August 6, 2015. Retrieved August 6, 2015.
  271. Baker, Peter (July 19, 2014). "With Jet Strike, War in Ukraine Is Felt Globally". The New York Times. ISSN 0362-4331. Archived from the original on April 11, 2017. Retrieved February 14, 2017.
  272. Ranter, Harro. "ASN Aircraft accident Boeing 777-2H6ER 9M-MRD Hrabove". aviation-safety.net. Aviation Safety Network. Archived from the original on June 3, 2020. Retrieved December 22, 2020.
  273. Walshe, Michael; McShane, Larry (July 17, 2014). "Malaysia Airlines Flight 17 shot down by surface-to-air missile in what Ukrainian president calls 'act of terrorism'". NY Daily News. NYDailyNews.com. Archived from the original on July 17, 2014. Retrieved July 17, 2014.
  274. Shoichet, Catherine E.; Fantz, Ashley (July 17, 2014). "U.S. official: Missile hit Malaysia Airlines plane". CNN. Archived from the original on March 26, 2015. Retrieved April 1, 2015.
  275. "MH17: The Netherlands and Australia hold Russia responsible". Government of the Netherlands. May 25, 2018. Archived from the original on April 27, 2021. Retrieved May 25, 2018.
  276. "Emirates flight from Trivandrum crash-lands in Dubai, passengers safe". Deccan Chronicle. August 3, 2016. Archived from the original on August 5, 2016. Retrieved August 3, 2016.
  277. "Preliminary Report AIFN/0008/2016" (PDF). Gcaa.gov.ae. GCAA. Archived (PDF) from the original on September 6, 2016. Retrieved September 7, 2016.
  278. "Images Of The Emirates Plane That Burst Into Flames In Dubai". NDTV. Archived from the original on August 6, 2016. Retrieved August 7, 2016.
  279. Ranter, Harro. "ASN Aircraft accident Boeing 777-212ER 9V-SQK Singapore-Changi International Airport (SIN)". aviation-safety.net. Archived from the original on October 22, 2020. Retrieved September 27, 2019.
  280. Chua2020-07-22T08:52:00+01:00, Alfred. "Ethiopian 777F suffers major fire in Shanghai". Flight Global. Archived from the original on July 22, 2020. Retrieved July 22, 2020.
  281. Madureira, Catarina (July 22, 2020). "Breaking: Ethiopian Boeing 777 Freighter Caught Fire in Shanghai". SamChui.com. Archived from the original on July 22, 2020. Retrieved July 22, 2020.
  282. "Engine debris rained over a mile across a Denver suburb. Now Boeing recommends suspending its 777s with that engine". CNN. February 22, 2021. Archived from the original on February 22, 2021. Retrieved February 22, 2021.
  283. "Boeing 777: Signs of 'metal fatigue' found on Denver plane engine". BBC News. February 23, 2021. Archived from the original on February 23, 2021. Retrieved February 23, 2021.
  284. "NTSB: Inspection Mistakes Caused Engine Failure On 2018 SFO-Hawaii Flight". July 2, 2020. Archived from the original on February 21, 2021. Retrieved February 22, 2021.
  285. "Boeing Aircraft Data File". Civil Jet Aircraft Design. Elsevier. July 1999. Archived from the original on November 5, 2016. Retrieved October 23, 2016.
  286. Daniel Tsang (July 26, 2012). "Boeing chooses largest wingspan for 777X". Aspire Aviation. Archived from the original on December 9, 2014. Retrieved March 5, 2017.
  287. "Backgrounder: The Boeing 777 Family" (PDF). Boeing Commercial Airplanes. May 2014. Archived (PDF) from the original on July 13, 2019. Retrieved June 4, 2018.
  288. "777-300ERSF Brochure" (PDF). GECAS/IAI. 2020. Archived (PDF) from the original on November 28, 2020. Retrieved October 29, 2020.
  289. "Type certificate data sheet No. EASA.IM.A.003" (PDF). EASA. December 10, 2018. Archived from the original (PDF) on December 23, 2018. Retrieved November 22, 2019.

Bibliography

  • Abarbanel, Robert; McNeely, William (1996). FlyThru the Boeing 777. New York: ACM SIGGRAPH. ISBN 0-89791-784-7.
  • Birtles, Philip (1998). Boeing 777, Jetliner for a New Century. St. Paul, Minnesota: Motorbooks International. ISBN 0-7603-0581-1.
  • Birtles, Philip (1999). Modern Civil Aircraft: 6, Boeing 757/767/777 (Third ed.). London: Ian Allan Publishing. ISBN 0-7110-2665-3.
  • Eden, Paul, ed. (2008). Civil Aircraft Today: The World's Most Successful Commercial Aircraft. London: Amber Books Ltd. ISBN 978-1-84509-324-2.
  • Frawley, Gerard (2003). The International Directory of Civil Aircraft 2003/2004. London: Aerospace Publications. ISBN 1-875671-58-7.
  • Glenday, Craig (2007). Guinness World Records. London/New York: HiT Entertainment. ISBN 978-0-9735514-4-0.
  • Newhouse, John (2008). Boeing versus Airbus: The Inside Story of the Greatest International Competition in Business. London: Vintage. ISBN 978-1-4000-7872-1.
  • Norris, Guy; Wagner, Mark (1996). Boeing 777. St. Paul, Minnesota: Motorbooks International. ISBN 0-7603-0091-7.
  • Norris, Guy; Wagner, Mark (2001). Boeing 777: The Technological Marvel. Minneapolis, Minnesota: Zenith Imprint. ISBN 0-7603-0890-X.
  • Norris, Guy; Wagner, Mark (2009). Boeing 787 Dreamliner. Osceola, Wisconsin: Zenith Press. ISBN 978-0-7603-2815-6.
  • Norris, Guy; Wagner, Mark (1999). Modern Boeing Jetliners. Minneapolis, Minnesota: Zenith Imprint. ISBN 0-7603-0717-2.
  • Sabbagh, Karl (1995). 21st Century Jet: The Making of the Boeing 777. New York: Scribner. ISBN 0-333-59803-2.
  • Wells, Alexander T.; Rodrigues, Clarence C. (2004). Commercial Aviation Safety. New York: McGraw-Hill Professional. ISBN 0-07-141742-7.
  • Yenne, Bill (2002). Inside Boeing: Building the 777. Minneapolis, Minnesota: Zenith Press. ISBN 0-7603-1251-6.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.