28 Water for Life
How to protect a spring
Springs are where groundwater naturally comes to the surface. Because spring water
is filtered through rock and soil and is moving quickly, it can be considered safe unless
it is contaminated at the surface. To know if a spring is safe, find the true source of the
spring — where it comes out of the ground — and ask these questions:
• Is there a stream or other surface water that goes underground above the
spring? If so, what appears to be a spring may in fact be surface water that
flows a short distance underground. In this case, it will likely be contaminated
or may flow only during the rainy season.
• Are there large openings in the rock above the spring? If so, check the water in
the spring after a heavy rain. If it appears very cloudy or muddy, contamination
from surface runoff is likely.
• Is there a possibility of contamination from human or animal wastes near or
just above the source of the spring? This could include pastures for livestock,
pit toilets, septic tanks, or other human activity.
• Is the soil very loose or sandy within 15 meters of the spring? This could allow
contaminated surface runoff to enter the groundwater.
Protect the area around the spring
Protecting a spring is cheaper than digging a well or borehole. And once a spring
is protected it is relatively easy to run pipes from the spring closer to the community.
To protect the area around a spring, fence the area 10 meters all around it and dig a
drainage ditch to carry away surface runoff and waste. Planting trees near the spring
will protect it even more, prevent erosion, and make it a more pleasant place to collect
water.
A fence around the spring will keep animals out.