TAVR Personnel

Current personnel requirements in the US for TAVR include a cardiac surgeon and interventional cardiologist performing the procedure jointly. Other intraoperative personnel necessary include anesthesia (preferably cardiac anesthesia) with TEE capability, perfusionist standby, and operating room/catheterization laboratory support staff including scrub technicians/nurses.

BAV Personnel

BAV personnel required for completion of this procedure include an interventional cardiologist trained in BAV and appropriate catheterization laboratory staff. Cardiac anesthesia with TEE capability is preferable.

TAVR Preparation

Heart Team evaluation of any proposed TAVR patient is required. This consists of an interprofessional group including interventional cardiology and cardiac surgery. There must be Heart Team consensus for recommending TAVR over SAVR. The Heart Team must also review all relevant procedural planning aspects including valve sizing and planned vascular access. Preoperative diagnostic studies include echocardiogram (TTE or TEE), coronary artery evaluation with angiography, and TAVR-protocol computed tomography (CT) scanning. These studies help to evaluate the severity of aortic valve disease, anatomy of the aortic valve and root apparatus, size of the annulus and aortic root sinuses, degree of valve calcification, vascular access options including the lower and upper extremities, and functional status of other cardiac structures including ventricular function. [8] Valve sizing can be accomplished with the use of dedicated software programs such as 3Mensio to aid with precise measurement. Laboratory workup should include an assessment of the baseline kidney function, liver function, hemoglobin, glucose, and type and cross-match. A pulmonary function test and arterial blood gas analysis may be performed in patients with known or suspected pulmonary disease. A detailed airway evaluation is crucial to assess if the patient will tolerate general anesthesia and to avoid preventable complications. A thorough review of the patient's preoperative medications should also be done.

The patient is instructed to continue medications as they would for any other surgical procedure. Antiplatelet agents such as aspirin and clopidogrel may be already part of a patient’s list of drugs, or they may be newly administered before the procedure. Aspirin in a dose of 75 to 300 mg should be delivered before the procedure if there are no contraindications to the use.[9] Currently, there are no standardized postoperative antiplatelet use protocols, although many centers will start dual antiplatelet therapy for a limited duration postoperatively. On the day of the operation, approximately one hour before the procedure, pretreatment with intravenous antibiotics should be administered. There are no guidelines for post-operative antibiotic therapy, but some reports in the literature report prophylactic antibiotics for three to seven days following the procedure.

BAV Preparation

Prior to BAV a TTE is performed to assess the anatomy and severity of the AV disease. The aortic valve area and the mean transaortic valve gradient are noted. A coronary angioplasty is also performed prior to BAV and in the evaluate for and treat for coronary artery disease.

TAVR Technique

The most important aspects to decide prior to the day of surgery is the valve size and vascular access. Various approaches include transfemoral, transaxillary, transapical, transaortic, and transcarotid.[10] [11] Percutaneous transfemoral approach is the most common and least invasive, while other approaches must be considered if the lower extremity or iliac vessels are of inadequate size, excessively tortuous, or heavily calcified. Of the alternative approaches, the transaxillary is the next most common.

For the transfemoral approach, the vessels can be accessed either percutaneously or via open surgical cutdown. For the percutaneous route, the contralateral common femoral artery and vein are accessed and small caliber sheaths (such as 5 Fr and 6 Fr) are placed. A temporary pacing wire is inserted through this venous access and positioned into the right heart for pacing during valve deployment. A pigtail catheter is placed via this arterial access and positioned in one of the aortic sinus cusps. The operative side common femoral artery is then accessed using fluoroscopic guidance and a micropuncture needle. Two pre-deployed percutaneous vessel closure suture devices are placed for future use. Exchange length guidewires and catheters are then placed per institutional routine. Heparin is administered. The aortic valve is crossed with a guidewire and then exchanged to a soft wire over an exchange catheter. The delivery sheath (if the selected TAVR device uses a sheath) is inserted. The new device is loaded onto the delivery device and appropriate orientation is confirmed. BAV can be performed now if desired. The TAVR valve and delivery device are then inserted and positioned appropriately across the aortic annulus under fluoroscopy. Depending on the specific valve type, rapid ventricular pacing may be necessary. Self-expanding valve prostheses may not required rapid pacing. The valve is then deployed under fluoroscopic guidance. Once deployed, TEE is performed to evaluate positioning, valve function, and assess for paravalvular leak. If TEE shows acceptable findings, the delivery device is then removed. All other catheters are removed sequentially. The temporary pacing wire can be removed or left in place if there is any concern for heart block or conduction abnormalities. The delivery sheath is removed and the pre-deployed suture closure devices are secured. 

For the transaxillary approach, an infraclavicular incision is made and soft tissue dissected to expose the axillary artery. The brachial plexus structures are often overlying the artery in this location and must be clearly identified and gently retracted to avoid injury. Furthermore, the use of electrocautery in this area should be avoided again to minimize the risk of injury to the nerve structures. Once the artery is exposed, proximal and distal control are obtained. Heparin is given. Pursestring sutures are placed at the site of planned access. Once the artery is accessed and wire placed via Seldinger technique, the remainder of the procedure can proceed as listed above for Transfemoral approach.

For the transpaical approach, an echocardiogram probe is placed on the left inframammary region to ascertain the exact location of the LV apex. An inframammary skin incision is made and soft tissue dissected to expose the intercostal space. A finder needle can be used to confirm location. The intercostal space and pericardium are opened to expose the LV apex. A pursestring suture is placed and LV cavity accessed using Seldinger technique. One note of caution for this approach: the valve must be loaded in the appropriate orientation. The orientation for the transapical approach is opposite that of all other approaches since the access direction is antegrade.

The transaortic approach requires an upper hemi-sternotomy to expose adequate ascending aorta. A pursestring is placed and aorta accessed again using Seldinger technique. The remainder of the procedure proceeds as described above.

BAV Technique

Access is obtained similar to the TAVR procedure described above. After obtaining access, a balloon catheter is introduced and positioned across the stenotic aortic valve. Aortic valvuloplasty is then performed with balloon inflation with the aim to increase aortic valve area (AVA) and reduce transaortic pressure gradient. To obtain the mean transaortic pressure gradient, a pigtail catheter is used to measure this gradient before and after valvuloplasty. The goal of this procedure is to reduce the pressure gradient by at least a half. If the initial attempt fails to achieve the gradient change then balloon inflation can be repeated. [12]

TAVR Complications

Studies have demonstrated vascular complications, arrhythmias/conduction abnormalities, and stroke were the most common major complications following TAVR.[13] Death, coronary obstruction, aortic root rupture, and major hemorrhage were also reported, although less frequently than the former.[14] According to a study done by Ribeiro and colleagues, the risk of coronary artery obstruction was four times higher in patients following valve-in-valve TAVR.[15] Other documented complications include worsening aortic stenosis or regurgitation, mispositioning of the valve, device embolus, kidney disease or myocardial infarction. PARTNER 2 Trial results showed a significantly higher rate of kidney disease with the use of TAVR versus SAVR.[16]

BAV Complications

BAV does not improve long term survival. Therefore, it is normally only recommended as a palliative measure or a bridge to TAVR or SAVR. Other common complications following BAV including prolonged hospitalizations, the requirement for blood transfusions, acute kidney injury and/or failure, serious vascular complications (most common), profound hypotension, cardiac tamponade, permanent pacemaker, moderate to severe aortic regurgitation, coronary occlusion or dissection, stroke, or intraprocedural death. [17]

TAVR

The advent of the transcatheter approach in managing aortic valve disease was a monumental turning point in the field of cardiovascular disease. TAVR has provided a treatment option for those deemed prohibitive risk for traditional SAVR, and offers a much less invasive and morbid option for those at lower surgical risk.  

BAV

The BAV was the first transcatheter intervention introduced for the treatment of severe aortic valve disease. Although it is no longer recommended as monotherapy, except as a palliative measure, it opened the door for more advanced therapies to be developed such as the formerly discussed TAVR. BAV is still performed today on patients as a bridge therapy for TAVR or SAVR and for palliative care as no long term survival benefit post-procedure has been established.

Percutaneous transcatheter management of aortic valve disease requires a skilled interprofessional team of healthcare professionals that includes a cardiac nurse, laboratory technologists, a pharmacist and some physicians in different specialties. Without proper pre-operative, intra-operative, and post-operative management life-threatening complications can and will occur. Therefore, it is imperative that the interprofessional team works as a unit with reliable communication to optimize patient-centered care. From the moment an aortic valve defect is identified, the discovering clinician has a responsibility to coordinate care including the following:

• Obtain an echocardiogram, electrocardiography, chest radiograph, and detailed physical exam including general labs
• Monitor the patient for signs and symptoms of respiratory distress, cardiac arrhythmias, and cardiovascular collapse
• Consult with the interventional cardiologist and cardiothoracic surgeon to assess the need for catheter versus surgical intervention [level 1]
• Consult with the structuralist about imaging tests to ensure that they meet the requirements for surgical or catheter management
• Consult with the intensivist about ICU care and monitoring while in the hospital with the assistance of cardiac specialty nurses trained nurses assisting with coordination of care, family education, and reporting untoward changes in vital signs and arrhythmias.
• The cardiac pharmacist specialty should assist with checking for drug-drug interactions, appropriate dosing, and assisting the team with monitoring therapeutic effect.

The management of aortic valve disease is a dynamic, ever-changing field. New technology comes up every day. It is crucial for the team to be up-to-date with the new upcoming technology and guidelines.