Hexamethylenetetramine

Hexamethylenetetramine
Names
Preferred IUPAC name
1,3,5,7-Tetraazaadamantane
Other names
Hexamine; Methenamine;
Urotropine; Formin, Aminoform
Identifiers
CAS Number
3D model (JSmol)
Beilstein Reference
 2018
ChEBI
ChEMBL
ChemSpider
DrugBank
EC Number
  • 202-905-8
Gmelin Reference
 26964
KEGG
MeSH Methenamine
PubChem CID
RTECS number
  • MN4725000
UNII
UN number 1328
InChI
  • InChI=1S/C6H12N4/c1-7-2-9-4-8(1)5-10(3-7)6-9/h1-6H2 checkY
    Key: VKYKSIONXSXAKP-UHFFFAOYSA-N checkY
  • InChI=1/C6H12N4/c1-7-2-9-4-8(1)5-10(3-7)6-9/h1-6H2
    Key: VKYKSIONXSXAKP-UHFFFAOYAW
SMILES
  • C1N2CN3CN1CN(C2)C3
Properties
Chemical formula
 C6H12N4
Molar mass 140.186 g/mol
Appearance White crystalline solid
Odor Fishy, ammonia like
Density 1.33 g/cm3 (at 20 °C)
Melting point 280 °C (536 °F; 553 K) (sublimes)
Solubility in water
 85.3 g/100 mL
Solubility Soluble in chloroform, methanol, ethanol, acetone, benzene, xylene, ether
Solubility in chloroform 13.4 g/100 g (20 °C)
Solubility in methanol 7.25 g/100 g (20 °C)
Solubility in ethanol 2.89 g/100 g (20 °C)
Solubility in acetone 0.65 g/100 g (20 °C)
Solubility in benzene 0.23 g/100 g (20 °C)
Acidity (pKa) 4.89[1]
Pharmacology
J01XX05 (WHO)
Hazards
Main hazards Highly combustible, harmful
GHS pictograms
GHS Signal word Warning
GHS hazard statements
 H228, H317
GHS precautionary statements
 P210, P240, P241, P261, P272, P280, P302+352, P321, P333+313, P363, P370+378, P501
NFPA 704 (fire diamond)
2
3
1
Flash point 250 °C (482 °F; 523 K)
Autoignition
temperature
 410 °C (770 °F; 683 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)
Infobox references

Hexamethylenetetramine, also known as methenamine, hexamine, or urotropin, is a heterocyclic organic compound with the formula (CH2)6N4. This white crystalline compound is highly soluble in water and polar organic solvents. It has a cage-like structure similar to adamantane. It is useful in the synthesis of other organic compounds, including plastics, pharmaceuticals, and rubber additives. It sublimes in vacuum at 280 °C.

Applications

The dominant use of hexamethylenetetramine is in the production of powdery or liquid preparations of phenolic resins and phenolic resin moulding compounds, where it is added as a hardening component. These products are used as binders, e.g. in brake and clutch linings, abrasive products, non-woven textiles, formed parts produced by moulding processes, and fireproof materials.[2]

Medical uses

As the mandelic acid salt (generic methenamine mandelate, USP[3]) it is used for the treatment of urinary tract infection. In an acidic environment, methenamine is believed to act as an antimicrobial by converting to formaldehyde.[4] A systematic review of its use for this purpose in adult women found there was no good evidence of benefit.[5]

Metheamine acts is an over-the-counter antiperspirant due to the astringent property of formaldehyde.[6]

Histological stains

Methenamine silver stains are used for staining in histology, including the following types:

Solid fuel

Together with 1,3,5-trioxane, hexamethylenetetramine is a component of hexamine fuel tablets used by campers, hobbyists, the military and relief organizations for heating camping food or military rations. It burns smokelessly, has a high energy density of 30.0 megajoules per kilogram (MJ/kg), does not liquify while burning, and leaves no ashes, although its fumes are toxic.

Standardized 0.149 g tablets of methenamine (hexamine) are used by fire-protection laboratories as a clean and reproducible fire source to test the flammability of carpets and rugs.[7]

Food additive

Hexamethylene tetramine or hexamine is also used as a food additive as a preservative (INS number 239). It is approved for usage for this purpose in the EU,[8] where it is listed under E number E239, however it is not approved in the USA, Russia, Australia, or New Zealand.[9]

Reagent in organic chemistry

Hexamethylenetetramine is a versatile reagent in organic synthesis.[10] It is used in the Duff reaction (formylation of arenes),[11] the Sommelet reaction (converting benzyl halides to aldehydes),[12] and in the Delepine reaction (synthesis of amines from alkyl halides).[13]

Explosives

Hexamethylenetetramine is the base component to produce RDX and, consequently, C-4[2] as well as Octogen, hexamine dinitrate, hexamine diperchlorate and HMTD.


Synthesis, structure, reactivity

Hexamethylenetetramine was discovered by Aleksandr Butlerov in 1859.[14][15] It is prepared industrially by combining formaldehyde and ammonia:[2]

The reaction can be conducted in gas phase and in solution.

The molecule has a tetrahedral cage-like structure, similar to adamantane. Four vertices are occupied by nitrogen atoms, which are linked by methylene groups. Although the molecular shape defines a cage, no void space is available at the interior for binding other atoms or molecules, unlike crown ethers or larger cryptand structures.

The molecule behaves like an amine base, undergoing protonation and N-alkylation (e.g. quaternium-15).

Historical uses

Hexamethylenetetramine was first introduced into the medical setting in 1899 as a urinary antiseptic.[16] However, it was only used in cases of acidic urine, whereas boric acid was used to treat urinary tract infections with alkaline urine.[17] Scientist De Eds found that there was a direct correlation between the acidity of hexamethylenetetramine's environment and the rate of its decomposition.[16] Therefore, its effectiveness as a drug depended greatly on the acidity of the urine rather than the amount of the drug administered.[17] In an alkaline environment, hexamethylenetetramine was found to be almost completely inactive.[17]

Hexamethylenetetramine was also used as a method of treatment for soldiers exposed to phosgene in World War I. Subsequent studies have shown that large doses of hexamethylenetetramine provide some protection if taken before phosgene exposure but none if taken afterwards.[18]

Hexamethylenetetramine from Bayer (IG Farben)

Producers

Since 1990 the number of European producers has been declining. The French SNPE factory closed in 1990; in 1993, the production of hexamethylenetetramine in Leuna, Germany ceased; in 1996, the Italian facility of Agrolinz closed down; in 2001, the UK producer Borden closed; in 2006, production at Chemko, Slovak Republic, was closed. Remaining producers include INEOS in Germany, Caldic in the Netherlands, and Hexion in Italy. In the US, Eli Lilly and Company stopped producing methenamine tablets in 2002.[7] In Australia, Hexamine Tablets for fuel are made by Thales Australia Ltd. In México, Hexamine is produced by Abiya.

References

  1. ↑ Cooney, A. P.; Crampton, M. R.; Golding, P. (1986). "The acid-base behaviour of hexamine and its N-acetyl derivatives". J. Chem. Soc., Perkin Trans. 2 (6): 835–839. doi:10.1039/P29860000835.
  2. 1 2 3 Eller, K.; Henkes, E.; Rossbacher, R.; Höke, H. (2000). "Amines, Aliphatic". Ullmann's Encyclopedia of Industrial Chemistry. Wiley-VCH Verlag GmbH. doi:10.1002/14356007.a02_001. ISBN 9783527306732.
  3. ↑ "Methenamine mandelate, USP". Edenbridge Pharmaceuticals. Archived from the original on 2017-05-17. Retrieved 2021-10-28.
  4. ↑ Chwa, A; Kavanagh, K; Linnebur, SA; Fixen, DR (2019). "Evaluation of methenamine for urinary tract infection prevention in older adults: a review of the evidence". Therapeutic Advances in Drug Safety. 10: 2042098619876749. doi:10.1177/2042098619876749. PMC 6759703. PMID 31579504.
  5. ↑ Bakhit M, Krzyzaniak N, Hilder J, Clark J, Scott AM, Mar CD (January 2021). "Use of methenamine hippurate to prevent urinary tract infections in community adult women: a systematic review and meta-analysis". Br J Gen Pract (Systematic review). 71 (708): e528–e537. doi:10.3399/BJGP.2020.0833. PMC 8136580. PMID 34001538.
  6. ↑ Susak, Z.; Minkov, R.; Isakov, E. (1996). "The use of Methenamine as an antiperspirant for amputees". Prosthetics and Orthotics International. 20 (3): 172–5. doi:10.3109/03093649609164439. PMID 8985996. S2CID 24088433.
  7. 1 2 Alan H. Schoen (2004), Re: Equialence of methenamine Tablets Standard for Flammability of Carpets and Rugs Archived 2008-10-05 at the Wayback Machine. U.S. Consumer product Safety Commission, Washington, DC, July 29, 2004. Many other countries who still produce this include Russia, Saudi Arabia, China and Australia.
  8. ↑ UK Food Standards Agency: "Current EU approved additives and their E Numbers". Archived from the original on 2010-10-07. Retrieved 2011-10-27.
  9. ↑ Australia New Zealand Food Standards Code"Standard 1.2.4 - Labelling of ingredients". Archived from the original on 2013-07-19. Retrieved 2011-10-27.
  10. ↑ Blažzević, N.; Kolbah, D.; Belin, B.; Šunjić, V.; Kajfež, F. (1979). "Hexamethylenetetramine, A Versatile Reagent in Organic Synthesis". Synthesis. 1979 (3): 161–176. doi:10.1055/s-1979-28602.
  11. ↑ Allen, C. F. H.; Leubne, G. W. (1951). "Syringic Aldehyde". Organic Syntheses. 31: 92. doi:10.15227/orgsyn.031.0092.
  12. ↑ Wiberg, K. B. (1963). "2-Thiophenaldehyde". Organic Syntheses. doi:10.15227/orgsyn.000.0000.; Collective Volume, vol. 3, p. 811
  13. ↑ Bottini, A. T.; Dev, V.; Klinck, J. (1963). "2-Bromoallylamine". Organic Syntheses. 43: 6. doi:10.15227/orgsyn.043.0006.
  14. ↑ Butlerow, A. (1859). "Ueber einige Derivate des Jodmethylens" [On some derivatives of methylene iodide]. Ann. Chem. Pharm. (in Deutsch). 111 (2): 242–252. doi:10.1002/jlac.18591110219. Archived from the original on 2021-04-27. Retrieved 2021-10-28. In this article, Butlerov discovered formaldehyde, which he called "dioxymethylen" (methylene dioxide) [page 247] because his empirical formula for it was incorrect (C4H4O4). On pages 249–250, he describes treating formaldehyde with ammonia gas, creating hexamine.
  15. ↑ Butlerow, A. (1860). "Ueber ein neues Methylenderivat" [On a new methylene derivative]. Ann. Chem. Pharm. (in Deutsch). 115 (3): 322–327. doi:10.1002/jlac.18601150325. Archived from the original on 2021-04-27. Retrieved 2021-10-28.
  16. 1 2 Heathcote, Reginald St. A. (1935). "Hexamine as an Urinary Antiseptic: I. ITS Rate of Hydrolysis at Different Hydrogen Ion Concentrations. Ii. ITS Antiseptic Power Against Various Bacteria in Urine". British Journal of Urology. 7 (1): 9–32. doi:10.1111/j.1464-410X.1935.tb11265.x. ISSN 0007-1331.
  17. 1 2 3 Elliot (1913). "On Urinary Antiseptics". British Medical Journal. 98: 685–686.
  18. ↑ Diller, Werner F. (1980). "The methenamine misunderstanding in the therapy of phosgene poisoning (review article)". Archives of Toxicology. 46 (3–4): 199–206. doi:10.1007/BF00310435. ISSN 0340-5761. PMID 7016075. S2CID 2423812.
This article is issued from Offline. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.